2006 Volkswagen Golf Hatchback Fifth generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Induction-pipe flap control unit | 7.38 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 74 HP at 5000 RPM, 126 N⋅m at 3300 RPM engine (2003.10–2006.5) | 14.75 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 79 HP at 5000 RPM, 132 N⋅m at 3800 RPM engine (2006.5–2008.11) | 14.75 lbf⋅ft |
1.4 FSI with gasoline straight-4 1.4 L 89 HP at 5200 RPM, 130 N⋅m at 3750 RPM engine (2003.10–2006.7) | 14.75 lbf⋅ft |
1.4 FSI with gasoline straight-4 1.4 L 89 HP at 5200 RPM, 130 N⋅m at 3750 RPM engine (2003.10–2006.7) | 14.75 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 168 HP at 6000 RPM, 240 N⋅m at 1750 RPM engine (2005.11–2008.11) | 14.75 lbf⋅ft |
1.6 FSI with gasoline straight-4 1.6 L 114 HP at 5800 RPM, 155 N⋅m at 4000 RPM engine (2003.10–2008.7) | 14.75 lbf⋅ft |
1.6 FSI with gasoline straight-4 1.6 L 114 HP, 155 N⋅m at 4000 RPM engine (2003.10–2008.7) | 14.75 lbf⋅ft |
1.6 FSI with gasoline straight-4 1.6 L 114 HP, 155 N⋅m at 4000 RPM engine (2003.10–2008.7) | 14.75 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP at 5600 RPM, 148 N⋅m at 3800 RPM engine (2004.1–2008.11) | 18.44 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.1–2008.11) | 18.44 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.1–2008.11) | 18.44 lbf⋅ft |
Engine with belt control | 7.38 lbf⋅ft |
Engine with chain drive | 6.64 lbf⋅ft |
2.0 GTI with gasoline straight-4 2.0 L 227 HP at 5500 RPM, 300 N⋅m at 2200 RPM engine (2006.9–2008.12) | 7.38 lbf⋅ft |
2.0 TDI 16V 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2004.8–2008.11) | 14.75 lbf⋅ft |
2.0 TDI 16V with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2003.10–2008.11) | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters AZV engines | 14.75 lbf⋅ft |
CBDA engine | 5.9 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 2000 RPM engine (2005.11–2008.11) | 14.75 lbf⋅ft |
3.2 R32 4motion with gasoline vr-6 3.2 L 247 HP at 6300 RPM, 320 N⋅m at 2500 RPM engine (2005.11–2008.11) | 9.59 lbf⋅ft |
3.2 R32 4motion with gasoline vr-6 3.2 L 247 HP engine (2005.11–2008.11) | 9.59 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
Auxiliary drive belt deflection pulley | 29.5 lbf⋅ft |
Engine with belt control | 16.96 lbf⋅ft |
Engine with chain drive | 7.38 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters AZV engines | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
M10 | 33.19 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Compressor belt | 16.96 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Top | 16.96 lbf⋅ft |
Compressor belt | 16.96 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Top | 16.96 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline vr-6 3.2 Liters BUB engines | 36.88 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
M10 | 33.19 lbf⋅ft |
All Volkswagen gasoline vr-6 3.2 Liters CBRA engines | 36.88 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Air compressor | 18.44 lbf⋅ft |
2.0 TDI 16V 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2004.8–2008.11) | 33.19 lbf⋅ft |
2.0 TDI 16V with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2003.10–2008.11) | 33.19 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 2000 RPM engine (2005.11–2008.11) | 33.19 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Engine with belt control | 29.5 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
All Volkswagen diesel straight-4 2.0 Liters AZV engines | 33.19 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.6 Liters BAG engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BCA engines | 29.5 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BKG engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BLF engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BLG engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BLN engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BLP engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BMY engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BUD engines | 29.5 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
Air-conditioning compressor pressure line | 16.23 lbf⋅ft |
Alternator | 16.96–18.44 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 74 HP at 5000 RPM, 126 N⋅m at 3300 RPM engine (2003.10–2006.5) | 29.5 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 79 HP at 5000 RPM, 132 N⋅m at 3800 RPM engine (2006.5–2008.11) | 29.5 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 138 HP at 5600 RPM, 220 N⋅m at 1500 RPM engine (2006.5–2008.11) | 18.44 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 168 HP at 6000 RPM, 240 N⋅m at 1750 RPM engine (2005.11–2008.11) | 18.44 lbf⋅ft |
Engine with belt control | 29.5 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
All Volkswagen diesel straight-4 2.0 Liters AZV engines | 33.19 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
3.2 R32 4motion with gasoline vr-6 3.2 L 247 HP at 6300 RPM, 320 N⋅m at 2500 RPM engine (2005.11–2008.11) | 16.96 lbf⋅ft |
3.2 R32 4motion with gasoline vr-6 3.2 L 247 HP engine (2005.11–2008.11) | 16.96 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
2.0 GTI with gasoline straight-4 2.0 L 197 HP at 5000 RPM, 280 N⋅m at 1800 RPM engine (2004.10–2009.2) | 6.64 lbf⋅ft |
2.0 TDI 16V 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2004.8–2008.11) | 14.75 lbf⋅ft |
2.0 TDI 16V with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2003.10–2008.11) | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters AZV engines | 14.75 lbf⋅ft |
CBDA engine | 7.38 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 2000 RPM engine (2005.11–2008.11) | 14.75 lbf⋅ft |
Top | 14.75 lbf⋅ft |
Bottom | 7.38 lbf⋅ft |
Support | 7.38 lbf⋅ft |
Other | 16.23 lbf⋅ft |
Sealing rings must be replaced. |
2.0 TDI with diesel straight-4 2.0 L 134 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2003.10–2008.11) | 7.38 lbf⋅ft |
Nuts | 18.44 lbf⋅ft |
Seals and nuts must be replaced. | |
Screws | 16.23 lbf⋅ft |
Sealing rings must be replaced. |
Nuts | 18.44 lbf⋅ft |
Sealing rings must be replaced. | |
Screws | 16.23 lbf⋅ft |
Sealing rings must be replaced. |
Nuts | 18.44 lbf⋅ft |
Sealing rings must be replaced. | |
Screws | 16.23 lbf⋅ft |
Sealing rings must be replaced. |
Nuts | 18.44 lbf⋅ft |
Sealing rings must be replaced. | |
Screws | 16.23 lbf⋅ft |
Sealing rings must be replaced. |
CBDA engine | 14.75 lbf⋅ft |
Sealing rings must be replaced. |
All other modifications | 16.23 lbf⋅ft |
Sealing rings must be replaced. |
All Volkswagen gasoline straight-4 2.0 Liters AXX engines | 5.9 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters AZV engines | 16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BAG engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BCA engines | 5.16 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BGU engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BKG engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BLF engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BLN engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BLP engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BSE engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BSF engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BUD engines | 5.16 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters BYD engines | 3.69 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 134 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2003.10–2008.11) | 20.65 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Central screws | 70.07 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
CBDA engine | 18.44 lbf⋅ft |
Lower section of intake manifold | 14.75 lbf⋅ft |
First stage | 2.21 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Third stage | 180° |
First stage | 2.21 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Third stage | 180° |
First stage | 2.21 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Third stage | 180° |
Nuts | 7.38 lbf⋅ft |
Screws | 3.69 lbf⋅ft |
First stage | 2.21 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Third stage | 180° |
First stage | 8.85 lbf⋅ft |
Screws must be replaced. | |
Second stage | 270° |
Engine with belt control | 7.38 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
Screws must be replaced. | |
M8 | 14.75 lbf⋅ft |
Screws must be replaced. |
All Volkswagen diesel straight-4 2.0 Liters AZV engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BKG engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BLG engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BMY engines | 5.9 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
M6 × 25 screws | 7.38 lbf⋅ft |
M8 × 20 screws | 18.44 lbf⋅ft |
M6 × 25 screws | 7.38 lbf⋅ft |
M8 × 20 screws | 18.44 lbf⋅ft |
M6 | 5.9 lbf⋅ft |
M10 | 18.44 lbf⋅ft |
At the turbocharger | 14.75 lbf⋅ft |
On the engine block | 29.5 lbf⋅ft |
Turbocharger coolant feed line | 5.9 lbf⋅ft |
Sealing rings must be replaced. | |
Turbocharger coolant return line | 5.9 lbf⋅ft |
Sealing rings must be replaced. |
1.4 TSI with gasoline straight-4 1.4 L 138 HP at 5600 RPM, 220 N⋅m at 1500 RPM engine (2006.5–2008.11) | 22.13 lbf⋅ft |
Parts must be replaced. | |
1.4 TSI with gasoline straight-4 1.4 L 168 HP at 6000 RPM, 240 N⋅m at 1750 RPM engine (2005.11–2008.11) | 22.13 lbf⋅ft |
Parts must be replaced. |
Union nuts | 16.23 lbf⋅ft |
Screws | 7.38 lbf⋅ft |
Nuts | 18.44 lbf⋅ft |
Nuts must be replaced. |
1.4 TSI with gasoline straight-4 1.4 L 138 HP at 5600 RPM, 220 N⋅m at 1500 RPM engine (2006.5–2008.11) | 5.9 lbf⋅ft |
Sealing rings must be replaced. | |
1.4 TSI with gasoline straight-4 1.4 L 168 HP at 6000 RPM, 240 N⋅m at 1750 RPM engine (2005.11–2008.11) | 5.9 lbf⋅ft |
Sealing rings must be replaced. |
At the turbocharger | 11.06 lbf⋅ft |
Sealing rings must be replaced. | |
Support at turbocharger | 18.44 lbf⋅ft |
Banjo screws | 44.25 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 12.54 lbf⋅ft |
Sealing rings must be replaced. | |
Union nuts on the engine block | 22.13 lbf⋅ft |
At the turbocharger | 12.54 lbf⋅ft |
Sealing rings must be replaced. | |
Union nuts on the engine block | 22.13 lbf⋅ft |
At the turbocharger | 14.75 lbf⋅ft |
Sealing rings must be replaced. | |
Union nuts on the engine block | 22.13 lbf⋅ft |
At the turbocharger | 14.75 lbf⋅ft |
Sealing rings must be replaced. | |
Union nuts on the engine block | 22.13 lbf⋅ft |
Support | 18.44 lbf⋅ft |
Otherwise | 11.06 lbf⋅ft |
Sealing rings must be replaced. |
Banjo screws | 44.25 lbf⋅ft |
Sealing rings must be replaced. |
At the turbocharger | 14.75 lbf⋅ft |
Sealing rings must be replaced. | |
Union nuts on the engine block | 22.13 lbf⋅ft |
At the turbocharger | 11.06 lbf⋅ft |
Sealing rings must be replaced. | |
Support at turbocharger | 14.75 lbf⋅ft |
Banjo screws | 44.25 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 11.06 lbf⋅ft |
Sealing rings must be replaced. | |
Support at turbocharger | 18.44 lbf⋅ft |
Banjo screws | 44.25 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 12.54 lbf⋅ft |
Sealing rings must be replaced. | |
Union nuts on the engine block | 22.13 lbf⋅ft |
At the turbocharger | 12.54 lbf⋅ft |
Sealing rings must be replaced. | |
Union nuts on the engine block | 22.13 lbf⋅ft |
Engine with belt control | 11.06 lbf⋅ft |
Engine with chain drive | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BAG engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BCA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BKG engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BLF engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BLG engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BLN engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BLP engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BMY engines | 5.9 lbf⋅ft |
All Volkswagen gasoline vr-6 3.2 Liters BUB engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BUD engines | 14.75 lbf⋅ft |
All Volkswagen gasoline vr-6 3.2 Liters CBRA engines | 5.9 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 168 HP at 6000 RPM, 240 N⋅m at 1750 RPM engine (2005.11–2008.11) | 17.7 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 134 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2003.10–2008.11) | 11.06 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 134 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2003.10–2008.11) | 3.69 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 134 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2003.10–2008.11) | 3.69 lbf⋅ft |
3.2 R32 4motion with gasoline vr-6 3.2 L 247 HP at 6300 RPM, 320 N⋅m at 2500 RPM engine (2005.11–2008.11) | 5.16 lbf⋅ft |
3.2 R32 4motion with gasoline vr-6 3.2 L 247 HP engine (2005.11–2008.11) | 5.16 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 74 HP at 5000 RPM, 126 N⋅m at 3300 RPM engine (2003.10–2006.5) | 7.38 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 79 HP at 5000 RPM, 132 N⋅m at 3800 RPM engine (2006.5–2008.11) | 7.38 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 138 HP at 5600 RPM, 220 N⋅m at 1500 RPM engine (2006.5–2008.11) | 7.38 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 168 HP at 6000 RPM, 240 N⋅m at 1750 RPM engine (2005.11–2008.11) | 7.38 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP at 5600 RPM, 148 N⋅m at 3800 RPM engine (2004.1–2008.11) | 16.96 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.1–2008.11) | 16.96 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.1–2008.11) | 16.96 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
2.0 TDI 16V 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2004.8–2008.11) | 14.75 lbf⋅ft |
2.0 TDI 16V with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2003.10–2008.11) | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters AZV engines | 14.75 lbf⋅ft |
Tighten the screws evenly in several steps. | |
CBDA engine | 7.38 lbf⋅ft |
Tighten the screws evenly in several steps. |
2.0 TDI with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 2000 RPM engine (2005.11–2008.11) | 14.75 lbf⋅ft |
Tighten the screws evenly in several steps. |
First stage | 3.69 lbf⋅ft |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 1. | |
Second stage | 90° |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 2. | |
Second stage | 90° |
Third stage | 90° |
First step | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second step | 90° |
First stage | 25.81 lbf⋅ft |
Screws must be replaced. See figure 3. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 3. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
First stage | 36.88 lbf⋅ft |
Use new screws. See figure 4. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new 12-point screw(s). See figure 5. | |
Second stage | 90° |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 5. | |
Second stage | 90° |
Third stage | 90° |
First stage | 25.81 lbf⋅ft |
Screws must be replaced. See figure 5. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
Long screws | 5.55 in |
Short screws | 4.37 in |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
Engine with belt control | 7.38 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Valve play adjusting screw lock nuts | 22.13 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. Left-hand thread. | |
Second stage | 90° |
On the engine block | 6.64 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 66.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 88.51 lbf⋅ft |
Second stage | 90° |
First stage | 88.51 lbf⋅ft |
Second stage | 90° |
First stage | 88.51 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws and seals must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws and seals must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws and seals must be replaced. | |
Second stage | 90° |
First stage | 88.51 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 88.51 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 66.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
2.0 TDI with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2004.12–2008.11) | 7.38 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Tighten the new screws evenly in several steps. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. | |
Second stage | 180° |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 66.38 lbf⋅ft |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Bolt must be replaced. | |
Second stage | 90° |
1.8 GTI (2006.8–2008.11) | 18.44 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Engine with chain drive | 14.75 lbf⋅ft |
Engine with chain drive | 14.75 lbf⋅ft |
All Volkswagen gasoline vr-6 3.2 Liters BUB engines | 7.38 lbf⋅ft |
All Volkswagen gasoline vr-6 3.2 Liters CBRA engines | 7.38 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
Cap | 6.64 lbf⋅ft |
Central screws | 25.81 lbf⋅ft |
Left-hand thread | |
Bearing casing | 6.64 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
Top | 29.5 lbf⋅ft |
Bottom | 18.44 lbf⋅ft |
Top | 18.44 lbf⋅ft |
Bottom | 25.81 lbf⋅ft |
Top | 18.44 lbf⋅ft |
Bottom | 25.81 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Bottom | 14.75 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Bottom | 14.75 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Bottom | 14.75 lbf⋅ft |
Top | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Bottom | 14.75 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Bottom | 14.75 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
M8 | 13.28 lbf⋅ft |
M10 | 16.96 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All Volkswagen gasoline vr-6 3.2 Liters BUB engines | 29.5 lbf⋅ft |
All Volkswagen gasoline vr-6 3.2 Liters CBRA engines | 29.5 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Central screws | 73.76 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
All Volkswagen gasoline straight-4 1.6 Liters BGU engines | 73.76 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
All Volkswagen gasoline straight-4 1.6 Liters BSE engines | 73.76 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BSF engines | 73.76 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Chain tensioner | 6.64 lbf⋅ft |
Control drive chain tensioner | 5.9 lbf⋅ft |
Use screw-locking compound. |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Control drive timing chain slip rail | 7.38 lbf⋅ft |
Coupling drive tensioning roller | 14.75 lbf⋅ft |
Drive belt tensioner device | 16.96 lbf⋅ft |
With timing chain | 62.69 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Second stage | 90° |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
M12 | 73.76 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. Left-hand thread. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
The screws and sprocket wheel must be replaced. | |
Second stage | for freedom from play |
First step | 22.13 lbf⋅ft |
Second step | 90° |
Engine with belt control | 11.06 lbf⋅ft |
Engine with chain drive | 6.64 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
M12 | 73.76 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Tension rail bearing screws | 14.75 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Coolant pump | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters AXX engines | 5.9 lbf⋅ft |
Use screw-locking compound. |
Upper screws | 7.38 lbf⋅ft |
Lower screws | 8.85 lbf⋅ft |
Bolt must be replaced. |
Upper screws | 7.38 lbf⋅ft |
Lower screws | 8.85 lbf⋅ft |
Bolt must be replaced. |
All Volkswagen gasoline straight-4 2.0 Liters BYD engines | 5.9 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Use screw-locking compound. |
Toothed belt guard at the top | 7.38 lbf⋅ft |
Use screw-locking compound. | |
Toothed belt guard center | 7.38 lbf⋅ft |
Use screw-locking compound. |
All Volkswagen gasoline straight-4 2.0 Liters AXW engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters AXX engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BCA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BGU engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters BLR engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters BLX engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters BLY engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BSE engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.6 Liters BSF engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BUD engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters BVX engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters BVY engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters BVZ engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters BYD engines | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Nuts must be replaced. | |
Second stage | 45° |
M6 | 5.9 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 138 HP at 5600 RPM, 220 N⋅m at 1500 RPM engine (2006.5–2008.11) | 5.9 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 168 HP at 6000 RPM, 240 N⋅m at 1750 RPM engine (2005.11–2008.11) | 5.9 lbf⋅ft |
1.6 FSI with gasoline straight-4 1.6 L 114 HP at 5800 RPM, 155 N⋅m at 4000 RPM engine (2003.10–2008.7) | 5.9 lbf⋅ft |
1.6 FSI with gasoline straight-4 1.6 L 114 HP, 155 N⋅m at 4000 RPM engine (2003.10–2008.7) | 5.9 lbf⋅ft |
1.6 FSI with gasoline straight-4 1.6 L 114 HP, 155 N⋅m at 4000 RPM engine (2003.10–2008.7) | 5.9 lbf⋅ft |
Engine with belt control | 18.44 lbf⋅ft |
Engine with chain drive | 11.06 lbf⋅ft |
Heat-exchanger on oil filter housing | 11.06 lbf⋅ft |
3.2 R32 4motion with gasoline vr-6 3.2 L 247 HP at 6300 RPM, 320 N⋅m at 2500 RPM engine (2005.11–2008.11) | 7.38 lbf⋅ft |
3.2 R32 4motion with gasoline vr-6 3.2 L 247 HP engine (2005.11–2008.11) | 7.38 lbf⋅ft |
Heat-exchanger on oil filter housing | 18.44 lbf⋅ft |
Oil drain plug | 22.13 lbf⋅ft |
Screws must be replaced. |
All Volkswagen diesel straight-4 2.0 Liters AZV engines | 18.44 lbf⋅ft |
Replace the O ring. |
All Volkswagen gasoline straight-4 1.6 Liters BAG engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BCA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BKG engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BLG engines | 18.44 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BMY engines | 18.44 lbf⋅ft |
Cap | 18.44 lbf⋅ft |
Locking screws | 7.38 lbf⋅ft |
Otherwise | 16.96 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Oil pressure sensor | 14.75 lbf⋅ft |
Sealing rings must be replaced. |
1.4 FSI with gasoline straight-4 1.4 L 89 HP at 5200 RPM, 130 N⋅m at 3750 RPM engine (2003.10–2006.7) | 18.44 lbf⋅ft |
1.4 FSI with gasoline straight-4 1.4 L 89 HP at 5200 RPM, 130 N⋅m at 3750 RPM engine (2003.10–2006.7) | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Second stage | 90° |
1.6 FSI with gasoline straight-4 1.6 L 114 HP at 5800 RPM, 155 N⋅m at 4000 RPM engine (2003.10–2008.7) | 18.44 lbf⋅ft |
1.6 FSI with gasoline straight-4 1.6 L 114 HP, 155 N⋅m at 4000 RPM engine (2003.10–2008.7) | 18.44 lbf⋅ft |
1.6 FSI with gasoline straight-4 1.6 L 114 HP, 155 N⋅m at 4000 RPM engine (2003.10–2008.7) | 18.44 lbf⋅ft |
1.9 TDI 4motion with diesel straight-4 1.9 L 103 HP at 4000 RPM, 250 N⋅m at 1900 RPM engine (2004.8–2008.11) | 8.85 lbf⋅ft |
1.9 TDI 4motion with diesel straight-4 1.9 L 103 HP at 4000 RPM, 250 N⋅m at 1900 RPM engine (2004.8–2008.11) | 8.85 lbf⋅ft |
1.9 TDI 4motion with diesel straight-4 1.9 L 103 HP engine (2004.8–2008.11) | 8.85 lbf⋅ft |
1.9 TDI with diesel straight-4 1.9 L 103 HP at 4000 RPM, 250 N⋅m at 1900 RPM engine (2003.10–2008.11) | 8.85 lbf⋅ft |
1.9 TDI with diesel straight-4 1.9 L 103 HP at 4000 RPM, 250 N⋅m at 1900 RPM engine (2003.10–2008.11) | 8.85 lbf⋅ft |
1.9 TDI with diesel straight-4 1.9 L 103 HP engine (2003.10–2008.11) | 8.85 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 11.06 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Engine with chain drive | 6.64 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
2.0 SDI with diesel straight-4 2.0 L 74 HP engine (2004.1–2008.11) | 11.06 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
At the gearbox | 9.59 lbf⋅ft |
At the gearbox | 18.44 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 11.06 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
At the gearbox | 33.19 lbf⋅ft |
On the engine block | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
Camshaft sensor | 7.38 lbf⋅ft |
Crankshaft sensor | 7.38 lbf⋅ft |
Exhaust gas temperature sensor | 33.19 lbf⋅ft |
Use hot screw paste |
Ceramic glow plug | 8.85 lbf⋅ft |
Metal glow plug | 7.38 lbf⋅ft |
Ceramic glow plug | 8.85 lbf⋅ft |
Metal glow plug | 7.38 lbf⋅ft |
Ceramic glow plug | 11.06 lbf⋅ft |
Ceramic glow plug | 8.85 lbf⋅ft |
Metal glow plug | 7.38 lbf⋅ft |
CBDA engine | 13.28 lbf⋅ft |
Ceramic glow plug | 8.85 lbf⋅ft |
Metal glow plug | 7.38 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 79 HP at 5000 RPM, 132 N⋅m at 3800 RPM engine (2006.5–2008.11) | 40.57 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP at 5600 RPM, 148 N⋅m at 3800 RPM engine (2004.1–2008.11) | 40.57 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.1–2008.11) | 40.57 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.1–2008.11) | 40.57 lbf⋅ft |
2.0 GTI with gasoline straight-4 2.0 L 197 HP at 5000 RPM, 280 N⋅m at 1800 RPM engine (2004.10–2009.2) | 40.57 lbf⋅ft |
2.0 GTI with gasoline straight-4 2.0 L 197 HP at 5000 RPM, 280 N⋅m at 1800 RPM engine (2004.10–2009.2) | 40.57 lbf⋅ft |
2.0 GTI with gasoline straight-4 2.0 L 197 HP at 5000 RPM, 280 N⋅m at 1800 RPM engine (2004.10–2009.2) | 40.57 lbf⋅ft |
2.0 GTI with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1700 RPM engine (2004.10–2009.2) | 40.57 lbf⋅ft |
2.0 GTI with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1800 RPM engine (2004.10–2009.2) | 40.57 lbf⋅ft |
2.0 GTI with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1800 RPM engine (2004.10–2009.2) | 40.57 lbf⋅ft |
All other modifications | 36.88 lbf⋅ft |
Use hot screw paste |
1.4 16V with gasoline straight-4 1.4 L 74 HP at 5000 RPM, 126 N⋅m at 3300 RPM engine (2003.10–2006.5) | 36.88 lbf⋅ft |
Screws must be replaced. | |
1.4 16V with gasoline straight-4 1.4 L 79 HP at 5000 RPM, 132 N⋅m at 3800 RPM engine (2006.5–2008.11) | 36.88 lbf⋅ft |
Screws must be replaced. |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Engine with belt control | 33.19 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
All other modifications | 33.19 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
On engine bracket | 73.76 lbf⋅ft |
Strut | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen diesel straight-4 2.0 Liters AZV engines | 5.16 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BLG engines | 16.96 lbf⋅ft |
Nuts must be replaced. | |
All Volkswagen gasoline straight-4 1.4 Liters BMY engines | 16.96 lbf⋅ft |
Nuts must be replaced. | |
All other modifications | 29.5 lbf⋅ft |
Nuts must be replaced. |
Strut | 29.5 lbf⋅ft |
Otherwise | 18.44 lbf⋅ft |
Diesel particulate filter | 5.16 lbf⋅ft |
Parts must be replaced. | |
Differential pressure sensor lines | 33.19 lbf⋅ft |
Bottom | 22.13 lbf⋅ft |
Nuts must be replaced. | |
Top | 14.75 lbf⋅ft |
Nuts must be replaced. |
All Volkswagen diesel straight-4 2.0 Liters AZV engines | 18.44 lbf⋅ft |
Nuts must be replaced. | |
CBDA engine | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters BLG engines | 18.44 lbf⋅ft |
Tighten new nuts evenly in several steps. | |
All Volkswagen gasoline straight-4 1.4 Liters BMY engines | 18.44 lbf⋅ft |
Tighten new nuts evenly in several steps. |
Bottom | 22.13 lbf⋅ft |
Top | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Screws must be replaced. |
All Volkswagen diesel straight-4 1.9 Liters BLS engines | 18.44 lbf⋅ft |
Nuts must be replaced. |
2.0 TDI 16V 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2004.8–2008.11) | 18.44 lbf⋅ft |
Nuts must be replaced. | |
2.0 TDI 16V with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2003.10–2008.11) | 18.44 lbf⋅ft |
Nuts must be replaced. |
All Volkswagen diesel straight-4 2.0 Liters AZV engines | 18.44 lbf⋅ft |
Nuts must be replaced. | |
CBDA engine | 14.75 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Nuts must be replaced. |
2.0 FSI with gasoline straight-4 2.0 L 148 HP at 6000 RPM, 200 N⋅m at 3500 RPM engine (2004.1–2008.11) | 14.75 lbf⋅ft |
2.0 FSI with gasoline straight-4 2.0 L 148 HP at 6000 RPM, 200 N⋅m at 3500 RPM engine (2004.1–2008.11) | 14.75 lbf⋅ft |
2.0 FSI with gasoline straight-4 2.0 L 148 HP at 6000 RPM, 200 N⋅m at 3500 RPM engine (2004.1–2008.11) | 14.75 lbf⋅ft |
2.0 FSI with gasoline straight-4 2.0 L 148 HP at 6000 RPM, 200 N⋅m at 3500 RPM engine (2004.1–2008.11) | 14.75 lbf⋅ft |
2.0 FSI with gasoline straight-4 2.0 L 148 HP at 6000 RPM, 200 N⋅m at 3500 RPM engine (2004.1–2008.11) | 14.75 lbf⋅ft |
2.0 FSI with gasoline straight-4 2.0 L 148 HP at 6000 RPM, 200 N⋅m at 3500 RPM engine (2004.1–2008.11) | 14.75 lbf⋅ft |
2.0 FSI with gasoline straight-4 2.0 L 148 HP engine (2004.1–2008.11) | 14.75 lbf⋅ft |
2.0 SDI with diesel straight-4 2.0 L 74 HP engine (2004.1–2008.11) | 29.5 lbf⋅ft |
Nuts must be replaced. | |
3.2 R32 4motion with gasoline vr-6 3.2 L 247 HP at 6300 RPM, 320 N⋅m at 2500 RPM engine (2005.11–2008.11) | 29.5 lbf⋅ft |
Nuts must be replaced. | |
3.2 R32 4motion with gasoline vr-6 3.2 L 247 HP engine (2005.11–2008.11) | 29.5 lbf⋅ft |
Nuts must be replaced. | |
All other modifications | 18.44 lbf⋅ft |
Nuts must be replaced. |
Exhaust pipe bracket | 18.44 lbf⋅ft |
Screws must be replaced. |
All Volkswagen diesel straight-4 2.0 Liters BMM engines | 29.5 lbf⋅ft |
All Volkswagen diesel straight-4 1.9 Liters BRU engines | 29.5 lbf⋅ft |
All Volkswagen diesel straight-4 1.9 Liters BXF engines | 29.5 lbf⋅ft |
All Volkswagen diesel straight-4 1.9 Liters BXJ engines | 29.5 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 134 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2003.10–2008.11) | 5.9 lbf⋅ft |
Fuel filter cover | 6.64 lbf⋅ft |
M10 | 11.06 lbf⋅ft |
M22 | 18.44 lbf⋅ft |
Union nuts | 16.23 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 74 HP at 5000 RPM, 126 N⋅m at 3300 RPM engine (2003.10–2006.5) | 22.13 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 79 HP at 5000 RPM, 132 N⋅m at 3800 RPM engine (2006.5–2008.11) | 22.13 lbf⋅ft |
3.2 R32 4motion with gasoline vr-6 3.2 L 247 HP at 6300 RPM, 320 N⋅m at 2500 RPM engine (2005.11–2008.11) | 13.28 lbf⋅ft |
3.2 R32 4motion with gasoline vr-6 3.2 L 247 HP engine (2005.11–2008.11) | 13.28 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
M10 | 44.25 lbf⋅ft |
M12 | 55.32 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 59 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2006 Volkswagen Golf Hatchback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Golf Hatchback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2006 Volkswagen Golf Hatchback you're not only saving money, but also also improving your technical skills and learning something new.
2006 Volkswagen Golf Hatchback generations
In 2006 Volkswagen offered 2 generations of the Golf Hatchback. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.