2009 Volkswagen Golf Hatchback transmission fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAxle drive


AWD clutch oil control screws	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreFront axle drive shaft

expand_moreAt the gearbox

expand_moreM8


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws must be replaced.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreM10


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws must be replaced.
Second stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m

expand_moreBi-hexagon screws

expand_moreWith ribbing


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreWithout ribbing


First stage	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
Screws must be replaced.
Second stage	180°180°180°


Propeller shaft intermediate bearing	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Propeller shaft	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreRear axle drive shaft


M8	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Screws must be replaced.
M10	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws must be replaced.

expand_moreCentral screws

expand_moreBi-hexagon

Figure 1. Axle drive, Rear axle drive shaft, Central screws, Bi-hexagon.

expand_moreWith ribbing
See figure 1.


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws must be replaced.
Second stage	90°90°90°

Figure 2. Axle drive, Rear axle drive shaft, Central screws, Bi-hexagon.

expand_moreWithout ribbing
See figure 2.


First stage	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
Screws must be replaced.
Second stage	180°180°180°

expand_moreClutch

expand_moreClutch master cylinder


1.4 TSI with gasoline straight-4 1.4 L 121 HP at 5500 RPM, 200 N⋅m at 1500 RPM engine (2008.10–2012.11)	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Nuts must be replaced.

expand_moreClutch pressure plate


M6	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Gradually tighten screws crosswise.
M7	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreClutch slave cylinder

expand_more1.4 with gasoline straight-4 1.4 L 79 HP at 5000 RPM, 132 N⋅m at 3800 RPM engine (2008.10–2012.11)


0AF gearbox	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_more1.6 BiFuel with gasoline/natural gas straight-4 1.6 L 101 HP at 5600 RPM, 148 N⋅m at 3800 RPM engine (2009.3–2012.11)


0AF gearbox	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_more2.0 GTi with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1800 RPM engine (2009.6–2013.11)


With metal concentric slave cylinder	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace bolts and tighten crosswise.
With plastic concentric slave cylinder	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Use new screws with the screw- locking compound.

expand_more2.0 GTi with gasoline straight-4 2.0 L 208 HP at 5300 RPM, 280 N⋅m at 1700 RPM engine (2009.4–2012.11)


With metal concentric slave cylinder	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace bolts and tighten crosswise.
With plastic concentric slave cylinder	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Use new screws with the screw- locking compound.

expand_more2.0 R 4motion with gasoline straight-4 2.0 L 267 HP at 6000 RPM, 350 N⋅m at 2500 RPM engine (2009.11–2012.11)


With metal concentric slave cylinder	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Otherwise	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_more2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2009.5–2012.11)


02Q gearbox	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Use new screws with the screw- locking compound.

expand_more2.0 TDI with diesel straight-4 2.0 L 134 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2008.10–2012.11)


02Q gearbox	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Use new screws with the screw- locking compound.

expand_more2.0 TDI with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2008.10–2013.5)


With screw-locking compound	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace bolts and tighten crosswise.
Otherwise	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace bolts and tighten crosswise.

expand_more2.0 TDI with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2009.4–2012.11)


With screw-locking compound	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace bolts and tighten crosswise.
Otherwise	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace bolts and tighten crosswise.


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


Clutch slave cylinder bleeder valve	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m

expand_moreRelease bearing guide sleeve


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreGear shifting


Back-up lamp switch	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Gearbox shift lever	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Nuts must be replaced.
Selector cable linkage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreGearbox

expand_moreGearbox flange connection at engine


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M12	59 lbf⋅ft59 lbf⋅ft80 N⋅m

expand_moreOutput flange


On transfer case	24.34 lbf⋅ft24.34 lbf⋅ft33 N⋅m

expand_moreGearbox lubrication


Distributor gearbox oil control screws	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Distributor gearbox oil filler screws	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Screws must be replaced.

expand_moreGearbox oil drain plug


0AM transmission	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_more0AJ gearbox


Hexagon head screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
With Torx screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more5-speed 0AH transmission


Hexagon head screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
With Torx screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


02S gearbox	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_more0AF gearbox


Hexagon head screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
With Torx screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


0A4 gearbox	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m

expand_more02Q gearbox


Hexagon head screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Seals must be replaced.
With Torx screws	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Seals must be replaced.

expand_moreDSG 02E gearbox


Overflow pipe	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Locking screws	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreGearbox oil filler plug

expand_more0AJ gearbox


Hexagon head screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
With Torx screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_more5-speed 0AH transmission


Hexagon head screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
With Torx screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


02S gearbox	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fill in gear oil via hole for back-up lamp switch.

expand_more0AF gearbox


Hexagon head screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
With Torx screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


0A4 gearbox	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fill in gear oil via hole for back-up lamp switch.
02S gearbox	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fill in gear oil via hole for back-up lamp switch.
02E transmission	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_more02Q gearbox


Hexagon head screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
With Torx screws	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m


Gearbox oil filter cover	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreGearbox oil sump


02E transmission	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreOil control plug


Overflow pipe	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Screws	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Seals must be replaced.

expand_moreGearbox mounting

expand_moreAt the gearbox


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreOn chassis


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreGearbox support

expand_more02E transmission


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_more02Q gearbox


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Screws must be replaced.
Second stage	90°90°90°

expand_moreTransfer case


Transfer box bracket	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreTransfer box onto transmission flange connection


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Screws must be replaced.
Second stage	90°90°90°

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2009 Volkswagen Golf Hatchback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Chassis and Body Fastener Tightening Specifications
Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Golf Hatchback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2009 Volkswagen Golf Hatchback you're not only saving money, but also also improving your technical skills and learning something new.

2009 Volkswagen Golf Hatchback generations

In 2009 Volkswagen offered 3 generations of the Golf Hatchback. Transmission fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Fourth generation facelift

PQ34

Type 1J

Fifth generation

PQ35

Type 1K

2009 Volkswagen Golf Hatchback Sixth generation Transmission Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

2009 Volkswagen Golf Hatchback generations

Fourth generation facelift

Fifth generation

Volkswagen Golf Hatchback Sixth generation model years

Suggest edit