in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
expand_moreBleed valve
Toyota diesel straight-4 2.0 L 1AD-FTV 125 HP, 310 N⋅m at 2400 RPM 7.38 lbf⋅ft
Toyota diesel straight-4 1.4 L 1ND-TV 89 HP 7.38 lbf⋅ft
expand_moreAll other modifications
Vehicles produces on Japan facility (TMC) 5.9 lbf⋅ft
Otherwise 7.38 lbf⋅ft
Brake hose 21.39 lbf⋅ft
expand_moreFront axle brake caliper
Toyota diesel straight-4 2.0 L 1AD-FTV 125 HP, 310 N⋅m at 2400 RPM 22.13 lbf⋅ft
Toyota diesel straight-4 1.4 L 1ND-TV 89 HP 22.13 lbf⋅ft
expand_moreAll other modifications
Vehicles produces on Japan facility (TMC) 25.08 lbf⋅ft
Otherwise 22.13 lbf⋅ft
Front axle brake caliper mounting support 78.92 lbf⋅ft
Wheel speed sensor 6.64 lbf⋅ft
expand_moreFront axle steering
Lower steering column joint 25.81 lbf⋅ft
Steering gear 101.78 lbf⋅ft
Track rod end on stub axle 36.14 lbf⋅ft
Replace locking pins.
Track rod end on track rod 54.58 lbf⋅ft
expand_moreFront axle suspension
expand_moreShock absorber
On chassis 36.88 lbf⋅ft
On stub axle 177.01 lbf⋅ft
expand_moreAll other modifications
On stub axle 177.01 lbf⋅ft
Shock-absorber piston rod 34.67 lbf⋅ft
Replace nuts.
expand_moreSuspension strut
On chassis 36.88 lbf⋅ft
On stub axle 177.01 lbf⋅ft
expand_moreWheel suspension
expand_moreFront axle drive shaft
Central nuts 215.37 lbf⋅ft
Replace nuts.
Central nuts 215.37 lbf⋅ft
Replace nuts.
expand_moreAll other modifications
Central nuts 159.31 lbf⋅ft
Replace nuts.
Front axle stabiliser mounting 64.17 lbf⋅ft
Stabiliser mounting at the stabiliser 54.58 lbf⋅ft
Stabiliser mounting at the stub axle 54.58 lbf⋅ft
Stabiliser mounting at suspension strut 54.58 lbf⋅ft
Stabilizer mounting at the subframe 64.17 lbf⋅ft
expand_moreSupport joint at the stub axle
First stage 98.1 lbf⋅ft
Replace locking pins.
Second stage 60° max. angle of rotation to
secure the cotter splint nut.
Support joint at the transverse control arm 65.64 lbf⋅ft
expand_moreTransverse control arm
Rear 171.85 lbf⋅ft
expand_moreWith a special tool
Front 126.86 lbf⋅ft
OE (09961-01270)
expand_moreWithout special tool
Front 171.85 lbf⋅ft
expand_moreWheel hub wheel bearing
On stub axle 70.81 lbf⋅ft
expand_moreWheels and tires
Wheel attachment 75.97 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2010 Toyota Corolla Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Corolla Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2010 Toyota Corolla Sedan you're not only saving money, but also also improving your technical skills and learning something new.

2010 Toyota Corolla Sedan generations

In 2010 Toyota offered 3 generations of the Corolla Sedan. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat