in your garage to make future searches easy.

Condition Value
Front axle brake disc diameter 10.75 in
expand_moreFront axle brake disc thickness
Vehicles produces on Japan facility (TMC) 0.87 in
Otherwise 1.02 in
expand_moreFront axle brake disc minimal thickness
Vehicles produces on Japan facility (TMC) 0.75 in
Otherwise 0.91 in
expand_moreFront axle brake lining thickness
Vehicles produces on Japan facility (TMC) 0.47 in
without backing plate
Otherwise 0.49 in
without backing plate
Front axle brake lining minimal thickness 0.039 in
without backing plate
Maximum lateral run-out of front axle brake disc 0.002 in
Maximum lateral run-out of rear axle brake disc 0.0059 in
Rear axle brake disc diameter 10.63 in
expand_moreRear axle brake disc thickness
Vehicles produces on Japan facility (TMC) 0.35 in
Otherwise 0.39 in
expand_moreRear axle minimal brake disc thickness
Vehicles produces on Japan facility (TMC) 0.3 in
Otherwise 0.31 in
expand_moreRear axle brake lining thickness
Vehicles produces on Japan facility (TMC) 0.37 in
without backing plate
Otherwise 0.39 in
without backing plate
Rear axle minimal brake lining thickness 0.039 in
without backing plate

Brake system is the most important system in your 2010 Corolla Sedan. Check pads and disks from time to time and replace them as they worn below minimum thickness allowed by Toyota.

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2010 Toyota Corolla Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Corolla Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2010 Toyota Corolla Sedan you're not only saving money, but also also improving your technical skills and learning something new.

2010 Toyota Corolla Sedan generations

In 2010 Toyota offered 3 generations of the Corolla Sedan. Brake system specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat