2017 Toyota Corolla Sedan Tenth generation (E140, E150 wide body) facelift Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Toyota diesel straight-4 2.0 L 1AD-FTV 125 HP, 310 N⋅m at 2400 RPM | 7.38 lbf⋅ft |
Toyota diesel straight-4 1.4 L 1ND-TV 89 HP | 7.38 lbf⋅ft |
Vehicles produces on Japan facility (TMC) | 5.9 lbf⋅ft |
Otherwise | 7.38 lbf⋅ft |
Brake hose | 21.39 lbf⋅ft |
Toyota diesel straight-4 2.0 L 1AD-FTV 125 HP, 310 N⋅m at 2400 RPM | 22.13 lbf⋅ft |
Toyota diesel straight-4 1.4 L 1ND-TV 89 HP | 22.13 lbf⋅ft |
Vehicles produces on Japan facility (TMC) | 25.08 lbf⋅ft |
Otherwise | 22.13 lbf⋅ft |
Front axle brake caliper mounting support | 78.92 lbf⋅ft |
Wheel speed sensor | 6.64 lbf⋅ft |
Lower steering column joint | 25.81 lbf⋅ft |
Steering gear | 101.78 lbf⋅ft |
Track rod end on stub axle | 36.14 lbf⋅ft |
Replace locking pins. | |
Track rod end on track rod | 54.58 lbf⋅ft |
On chassis | 36.88 lbf⋅ft |
On stub axle | 177.01 lbf⋅ft |
On stub axle | 177.01 lbf⋅ft |
Shock-absorber piston rod | 34.67 lbf⋅ft |
Replace nuts. |
On chassis | 36.88 lbf⋅ft |
On stub axle | 177.01 lbf⋅ft |
Central nuts | 215.37 lbf⋅ft |
Replace nuts. |
Central nuts | 215.37 lbf⋅ft |
Replace nuts. |
Central nuts | 159.31 lbf⋅ft |
Replace nuts. |
Front axle stabiliser mounting | 64.17 lbf⋅ft |
Stabiliser mounting at the stabiliser | 54.58 lbf⋅ft |
Stabiliser mounting at the stub axle | 54.58 lbf⋅ft |
Stabiliser mounting at suspension strut | 54.58 lbf⋅ft |
Stabilizer mounting at the subframe | 64.17 lbf⋅ft |
First stage | 98.1 lbf⋅ft |
Replace locking pins. | |
Second stage | 60° max. angle of rotation to secure the cotter splint nut. |
Support joint at the transverse control arm | 65.64 lbf⋅ft |
Rear | 171.85 lbf⋅ft |
Front | 126.86 lbf⋅ft |
OE (09961-01270) |
Front | 171.85 lbf⋅ft |
On stub axle | 70.81 lbf⋅ft |
Wheel attachment | 75.97 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2017 Toyota Corolla Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Corolla Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2017 Toyota Corolla Sedan you're not only saving money, but also also improving your technical skills and learning something new.
2017 Toyota Corolla Sedan generations
In 2017 Toyota offered 3 generations of the Corolla Sedan. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.