60° max. angle of rotation to secure the cotter splint nut.
Support joint at the transverse control arm
65.64 lbf⋅ft65.64 lbf⋅ft89 N⋅m
expand_moreTransverse control arm
Rear
171.85 lbf⋅ft171.85 lbf⋅ft233 N⋅m
expand_moreWith a special tool
Front
126.86 lbf⋅ft126.86 lbf⋅ft172 N⋅m
OE (09961-01270)
expand_moreWithout special tool
Front
171.85 lbf⋅ft171.85 lbf⋅ft233 N⋅m
expand_moreWheel hub wheel bearing
On stub axle
70.81 lbf⋅ft70.81 lbf⋅ft96 N⋅m
expand_moreWheels and tires
Wheel attachment
75.97 lbf⋅ft75.97 lbf⋅ft103 N⋅m
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2010 Toyota Corolla Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Corolla Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2010 Toyota Corolla Sedan you're not only saving money, but also also improving your technical skills and learning something new.
2010 Toyota Corolla Sedan generations
In 2010 Toyota offered 3 generations of the Corolla Sedan. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.