2005 Opel Vectra Sedan C2 Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Drive shaft intermediate bearing | 13.28 lbf⋅ft |
First stage | 110.63 lbf⋅ft |
Replace protective caps. | |
Second stage | 45° detach |
Third stage | 184.39 lbf⋅ft |
Clutch master cylinder | 14.75 lbf⋅ft |
M7 | 11.06 lbf⋅ft |
Replace bolts and tighten crosswise. | |
M8 | 20.65 lbf⋅ft |
Replace bolts and tighten crosswise. |
With concentric slave cylinder | 3.69 lbf⋅ft |
Use new screws with the screw- locking compound. |
F35 gearbox | 11.06 lbf⋅ft |
F17+ gearbox | 14.75 lbf⋅ft |
Replace sealing rings. |
Selector cable linkage | 14.75 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 44.25 lbf⋅ft |
2.0 DTI 16V with diesel straight-4 2.0 L 99 HP at 4300 RPM, 230 N⋅m at 1950 RPM engine (2002.4–) | 44.25 lbf⋅ft |
Clean the thread, use new screws and screw-locking compound. |
AF 23 gearbox | 29.5 lbf⋅ft |
Replace sealing rings. | |
AF 33 gearbox | 29.5 lbf⋅ft |
Replace sealing rings. | |
F23 gearbox | 25.81 lbf⋅ft |
F40 gearbox | 36.88 lbf⋅ft |
M32 gearbox | 14.75 lbf⋅ft |
Use new seal and screws. | |
VT20-E gearbox | 14.75 lbf⋅ft |
AF 23 gearbox | 29.5 lbf⋅ft |
Replace sealing rings. | |
AF 33 gearbox | 29.5 lbf⋅ft |
Replace sealing rings. | |
AF40 gearbox | 29.5 lbf⋅ft |
F23 gearbox | 25.81 lbf⋅ft |
F40 gearbox | 36.88 lbf⋅ft |
M32 gearbox | 22.13 lbf⋅ft |
F17+ gearbox | 13.28 lbf⋅ft |
Replace sealing rings. |
AF 40 gearbox | 5.9 lbf⋅ft |
Replace sealing rings. |
First stage | 2.95 lbf⋅ft |
Second stage | 45–180° |
F23 gearbox | 25.81 lbf⋅ft |
F35 gearbox | 36.88 lbf⋅ft |
F40 gearbox | 7.38 lbf⋅ft |
VT20-E gearbox | 8.11 lbf⋅ft |
Front | 59 lbf⋅ft |
Rear | 59 lbf⋅ft |
At the gearbox |
Front | 59 lbf⋅ft |
Rear | 59 lbf⋅ft |
At the gearbox |
All other modifications | 40.57 lbf⋅ft |
Gearbox support | 40.57 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2005 Opel Vectra Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Vectra Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2005 Opel Vectra Sedan you're not only saving money, but also also improving your technical skills and learning something new.