2005 Opel Vectra Sedan C2 Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Bleed valve | 6.64 lbf⋅ft |
Brake hose | 11.8 lbf⋅ft |
Replace sealing rings. | |
Brake line | 11.8 lbf⋅ft |
Front axle brake caliper | 22.13 lbf⋅ft |
Front axle brake caliper mounting support | 169.64 lbf⋅ft |
Use new screws. | |
Front axle brake disc | 5.16 lbf⋅ft |
First stage | 33.19 lbf⋅ft |
Use new screws and nuts. | |
Second stage | 45° |
Third stage | 15° |
Track rod end on stub axle | 25.81 lbf⋅ft |
Track rod end on track rod | 44.25 lbf⋅ft |
Shock-absorber piston rod | 73.76 lbf⋅ft |
Replace nuts. |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Third stage | 15° |
First stage | 36.88 lbf⋅ft |
Replace screws and nuts. |
First step | 62.69 lbf⋅ft |
Second step | 75° |
Third step | 15° |
First stage | 110.63 lbf⋅ft |
Replace protective caps. | |
Second stage | 45° detach |
Third stage | 184.39 lbf⋅ft |
Front axle stabiliser mounting | 14.75 lbf⋅ft |
Stabiliser mounting at suspension strut | 47.94 lbf⋅ft |
Replace nuts. |
First stage | 22.13 lbf⋅ft |
Replace nuts. | |
Second stage | 60° |
Third stage | 15° |
First stage | 66.38 lbf⋅ft |
Second stage | 75° |
Third stage | 15° |
First stage | 66.38 lbf⋅ft |
Second stage | 75° |
Third stage | 15° |
First stage | 66.38 lbf⋅ft |
Second stage | 75° |
Third stage | 15° |
Stabilizer of front axle on axle | 47.94 lbf⋅ft |
First stage | 66.38 lbf⋅ft |
Second stage | 75° |
Third stage | 15° |
First stage | 73.76 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 60° |
Third stage | 15° |
Tire pressure sensors | 7.38 lbf⋅ft |
Wheel attachment | 81.13 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2005 Opel Vectra Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Vectra Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2005 Opel Vectra Sedan you're not only saving money, but also also improving your technical skills and learning something new.