in your garage to make future searches easy.

Condition Value
expand_moreAxle drive
Drive shaft intermediate bearing 13.28 lbf⋅ft
expand_moreFront axle drive shaft
First stage 110.63 lbf⋅ft
Replace protective caps.
Second stage 45° detach
Third stage 184.39 lbf⋅ft
expand_moreClutch
Clutch master cylinder 14.75 lbf⋅ft
expand_moreClutch pressure plate
Opel diesel straight-4 2.2 L Y 22 DTR 123 HP 11.06 lbf⋅ft
Opel diesel straight-4 2.0 L Y 20 DTH 99 HP at 4300 RPM, 230 N⋅m at 1950 RPM 11.06 lbf⋅ft
Opel gasoline straight-4 1.6 L Z 16 XE 99 HP at 6000 RPM, 150 N⋅m at 3600 RPM 11.06 lbf⋅ft
expand_moreAll other modifications
M7 11.06 lbf⋅ft
Replace bolts and tighten crosswise.
M8 20.65 lbf⋅ft
Replace bolts and tighten crosswise.
expand_moreClutch slave cylinder
With concentric slave cylinder 3.69 lbf⋅ft
Use new screws with the screw- locking compound.
expand_moreGear shifting
expand_moreBack-up lamp switch
F35 gearbox 11.06 lbf⋅ft
F17+ gearbox 14.75 lbf⋅ft
Replace sealing rings.
Selector cable linkage 14.75 lbf⋅ft
expand_moreGearbox
expand_moreGearbox flange connection at engine
M10 29.5 lbf⋅ft
M12 44.25 lbf⋅ft
expand_moreTorque converter
2.0 DTI 16V with diesel straight-4 2.0 L 99 HP at 4300 RPM, 230 N⋅m at 1950 RPM engine (2002.4–) 44.25 lbf⋅ft
Clean the thread, use new screws and screw-locking compound.
expand_moreGearbox lubrication
expand_moreGearbox oil drain plug
AF 23 gearbox 29.5 lbf⋅ft
Replace sealing rings.
AF 33 gearbox 29.5 lbf⋅ft
Replace sealing rings.
F23 gearbox 25.81 lbf⋅ft
F40 gearbox 36.88 lbf⋅ft
M32 gearbox 14.75 lbf⋅ft
Use new seal and screws.
VT20-E gearbox 14.75 lbf⋅ft
expand_moreGearbox oil filler plug
AF 23 gearbox 29.5 lbf⋅ft
Replace sealing rings.
AF 33 gearbox 29.5 lbf⋅ft
Replace sealing rings.
AF40 gearbox 29.5 lbf⋅ft
F23 gearbox 25.81 lbf⋅ft
F40 gearbox 36.88 lbf⋅ft
M32 gearbox 22.13 lbf⋅ft
expand_moreGearbox oil sump
F17+ gearbox 13.28 lbf⋅ft
Replace sealing rings.
expand_moreOil control plug
AF 40 gearbox 5.9 lbf⋅ft
Replace sealing rings.
expand_moreF17+ gearbox
First stage 2.95 lbf⋅ft
Second stage 45180°
F23 gearbox 25.81 lbf⋅ft
F35 gearbox 36.88 lbf⋅ft
F40 gearbox 7.38 lbf⋅ft
VT20-E gearbox 8.11 lbf⋅ft
expand_moreGearbox mounting
expand_moreGearbox mounting
Front 59 lbf⋅ft
Rear 59 lbf⋅ft
At the gearbox
Front 59 lbf⋅ft
Rear 59 lbf⋅ft
At the gearbox
Front 59 lbf⋅ft
Rear 59 lbf⋅ft
At the gearbox
Front 59 lbf⋅ft
Rear 59 lbf⋅ft
At the gearbox
All other modifications 40.57 lbf⋅ft
Gearbox support 40.57 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2008 Opel Vectra Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Vectra Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2008 Opel Vectra Sedan you're not only saving money, but also also improving your technical skills and learning something new.

Opel Vectra Sedan C2 model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat