in your garage to make future searches easy.

Condition Value
expand_moreAir intake system
expand_moreIntake manifold
All other modifications 6.64 lbf⋅ft
expand_moreIntake manifold support
expand_moreAuxiliary assemblies
expand_moreAuxiliary drive belt deflection pulley
1.8 TFSI quattro with gasoline straight-4 1.8 L 158 HP at 4500 RPM, 250 N⋅m at 1500 RPM engine (2008.9–2012.3) 14.75 lbf⋅ft
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12)
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.1–2012.3)
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12)
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 90°
2.0 TFSI flexible fuel quattro with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2009.11–2015.12) 14.75 lbf⋅ft
2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12) 14.75 lbf⋅ft
2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12) 14.75 lbf⋅ft
2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12) 14.75 lbf⋅ft
3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3) 29.5 lbf⋅ft
All other modifications 16.96 lbf⋅ft
expand_moreAuxiliary drive belt tensioner
1.8 TFSI quattro with gasoline straight-4 1.8 L 158 HP at 4500 RPM, 250 N⋅m at 1500 RPM engine (2008.9–2012.3) 29.5 lbf⋅ft
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM engine (2011.11–2015.12)
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12) 16.96 lbf⋅ft
2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12) 16.96 lbf⋅ft
2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.1–2012.3) 16.96 lbf⋅ft
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12)
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 180°
2.0 TFSI flexible fuel quattro with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2009.11–2015.12) 29.5 lbf⋅ft
2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12) 29.5 lbf⋅ft
2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12) 29.5 lbf⋅ft
2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12) 29.5 lbf⋅ft
3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3) 29.5 lbf⋅ft
expand_moreAll other modifications
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAir-conditioning compressor
2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12) 16.96 lbf⋅ft
2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12) 16.96 lbf⋅ft
All other modifications 18.44 lbf⋅ft
expand_moreAir-conditioning compressor bracket
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12)
expand_moreM10 × 155 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreM10 × 40 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
expand_moreM10 × 60 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
3.0 TDI quattro with diesel V6 3.0 L 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM engine (2011.11–2015.12) 29.5 lbf⋅ft
3.0 TDI quattro with diesel V6 3.0 L 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM engine (2011.11–2015.12) 29.5 lbf⋅ft
3.0 TDI quattro with diesel V6 3.0 L 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM engine (2011.11–2015.12) 29.5 lbf⋅ft
3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3) 14.75 lbf⋅ft
expand_moreAll other modifications
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAir-conditioning compressor pressure line
M6 6.64 lbf⋅ft
M8 18.44 lbf⋅ft
expand_moreAlternator
All other modifications 16.96 lbf⋅ft
expand_moreGenerator bracket
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 158 HP at 4500 RPM, 250 N⋅m at 1500 RPM engine (2008.9–2012.3)
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM engine (2011.11–2015.12)
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.1–2012.3)
First stage 14.75 lbf⋅ft
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12)
expand_moreM10 × 155 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreM10 × 40 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
expand_moreM10 × 60 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
expand_more2.0 TFSI flexible fuel quattro with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2009.11–2015.12)
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_more2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12)
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 29.5 lbf⋅ft
expand_morePower steering pump bracket
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreHydraulic lines at the servo-steering pump
expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines
With active steering 28.03 lbf⋅ft
Without active steering 6.64 lbf⋅ft
expand_moreAll other modifications
M6 6.64 lbf⋅ft
Union nuts 28.03 lbf⋅ft
expand_moreServo pump pulley
expand_moreAll Audi diesel V6 3.0 L CAPA engines
With active steering 16.23 lbf⋅ft
Otherwise 18.44 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CKVB engines
With active steering 18.44 lbf⋅ft
Without active steering 16.23 lbf⋅ft
All other modifications 16.23 lbf⋅ft
expand_moreServo steering pump
With active steering 18.44 lbf⋅ft
Without active steering 18.44 lbf⋅ft
Audi gasoline V6 3.2 L CALA 261 HP 14.75 lbf⋅ft
All other modifications 18.44 lbf⋅ft
Vacuum pump 7.38 lbf⋅ft
expand_moreCarburetion
Injection pump drive wheel 55.32 lbf⋅ft
expand_moreFuel-distributing pipe
Audi gasoline straight-4 1.8 L CJEB 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM 6.64 lbf⋅ft
All other modifications 16.23 lbf⋅ft
expand_moreHigh-pressure line
Audi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM 18.44 lbf⋅ft
Audi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM 18.44 lbf⋅ft
Audi diesel V6 3.0 L CKVB 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM 18.44 lbf⋅ft
Audi diesel V6 3.0 L CKVC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM 18.44 lbf⋅ft
All other modifications 19.91 lbf⋅ft
expand_moreHigh-pressure pump
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreM8 × 28 screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreM8 × 90 screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 180°
Audi diesel V6 3.0 L CDUC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM 16.23 lbf⋅ft
Audi diesel V6 3.0 L CKVC 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM 16.23 lbf⋅ft
Audi diesel V6 3.0 L CKVB 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM 16.23 lbf⋅ft
Audi gasoline V6 3.2 L CALA 261 HP 6.64 lbf⋅ft
All other modifications 14.75 lbf⋅ft
Tighten bolts uniformly in several passes.
expand_moreHigh-pressure pump pulley
expand_moreAll Audi diesel straight-4 2.0 L CAHA engines
Central nuts 70.07 lbf⋅ft
Wheel 14.75 lbf⋅ft
Replace screws.
All Audi diesel V6 3.0 L CAPA engines 51.63 lbf⋅ft
All Audi diesel V6 3.0 L CCLA engines 51.63 lbf⋅ft
All Audi diesel V6 3.0 L CCWA engines 51.63 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
Central nuts 70.07 lbf⋅ft
Wheel 14.75 lbf⋅ft
Replace screws.
expand_moreAll Audi diesel V6 3.0 L CKVB engines
Central nuts 51.63 lbf⋅ft
expand_moreAll other modifications
Central nuts 70.07 lbf⋅ft
Wheel 14.75 lbf⋅ft
Replace bolts.
Injection hoses 18.44 lbf⋅ft
Check compressed air line.
expand_moreInjection nozzle (injector)
expand_moreAll Audi diesel straight-4 2.0 L CAGA engines
expand_moreRetaining clamp
Nuts 7.38 lbf⋅ft
Screws 3.69 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CAHA engines
Nuts 7.38 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreAll Audi diesel V6 3.0 L CKVB engines
Retaining clamp 10.33 lbf⋅ft
expand_moreAll other modifications
expand_moreRetaining clamp
Nuts 7.38 lbf⋅ft
expand_moreInjection pump
High-pressure pump 14.75 lbf⋅ft
High-pressure pump 7.38 lbf⋅ft
Replace screws.
Audi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM 14.75 lbf⋅ft
High-pressure pump 14.75 lbf⋅ft
Tighten bolts uniformly in several passes.
expand_moreAll other modifications
M6 6.64 lbf⋅ft
M8 16.96 lbf⋅ft
expand_morePressure tube connection
All Audi gasoline straight-4 1.8 L CJEB engines 29.5 lbf⋅ft
Replace components.
expand_moreCharging
expand_moreCharge air pipes
expand_moreCharge air compressor
Nuts 14.75 lbf⋅ft
Stud screws 12.54 lbf⋅ft
expand_moreTurbo charger
All Audi diesel straight-4 2.0 L CAGA engines 18.44 lbf⋅ft
Replace the nuts and use fitting paste
All Audi diesel straight-4 2.0 L CAHA engines 18.44 lbf⋅ft
Replace the nuts and use fitting paste
All Audi diesel straight-4 2.0 L CGLC engines 17.7 lbf⋅ft
Replace nuts. Use hot screw paste.
All Audi diesel straight-4 2.0 L CJCA engines 18.44 lbf⋅ft
Replace the nuts and use fitting paste
All Audi gasoline straight-4 1.8 L CJEB engines 18.44 lbf⋅ft
Replace nuts. Use hot screw paste.
expand_moreAll other modifications
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreTurbocharger bracket
All other modifications 22.13 lbf⋅ft
expand_moreTurbocharger coolant feed line
expand_moreTurbocharger coolant return line
expand_moreTurbocharger oil feed line
expand_moreAll other modifications
Banjo screws 22.13 lbf⋅ft
Replace sealing rings.
Union nuts 16.23 lbf⋅ft
expand_moreTurbocharger oil return line
All other modifications 6.64 lbf⋅ft
expand_moreCooling system
expand_moreCoolant pump
2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12) 11.06 lbf⋅ft
2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12) 11.06 lbf⋅ft
2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.1–2012.3) 11.06 lbf⋅ft
2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12) 11.06 lbf⋅ft
All other modifications 6.64 lbf⋅ft
Gradually tighten screws crosswise.
Coolant pump pulley 16.96 lbf⋅ft
expand_moreCoolant pump drive wheel
First stage 7.38 lbf⋅ft
Use new screw. (left-hand thread)
Second stage 90°
expand_moreCylinder head
expand_moreCamshaft bearing
expand_moreAt the cylinder head
expand_moreBearing casing
First stage 5.9 lbf⋅ft
Tighten new screws in inside-to-outside order.
Second stage 90°
First stage Screw in screw(s) by hand.
Replace screws.
expand_moreSecond stage
First step 5.9 lbf⋅ft
Second step 90°
expand_moreAll other modifications
Bearing casing 6.64 lbf⋅ft
Tighten the screws evenly from inside to outside in several steps.
expand_moreCylinder head screws
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 158 HP at 4500 RPM, 250 N⋅m at 1500 RPM engine (2008.9–2012.3)
expand_moreScrews 1 – 10
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 90°
expand_moreScrews 11 – 14
expand_moreFourth stage
First step 5.9 lbf⋅ft
Replace screws.
Second step 90°
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM engine (2011.11–2015.12)
expand_moreScrews 1-10
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 90°
expand_moreScrew 11
expand_moreFirst stage
First step 5.9 lbf⋅ft
Replace screws.
Second step 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12)
expand_moreCAGA engine
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 44.25 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_moreCJCA engine
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 36.88 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.1–2012.3)
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 44.25 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12)
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 36.88 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_more3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2007.11–2012.3)
First stage 25.81 lbf⋅ft
Use new screws.
Second stage 44.25 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_more3.0 TDI quattro with diesel V6 3.0 L 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM engine (2011.11–2015.12)
First stage Tighten by hand
Replace screws.
Second stage 25.81 lbf⋅ft
Third stage 51.63 lbf⋅ft
Fourth stage 90°
Fifth stage 90°
expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3)
expand_moreScrews 1 – 7
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 90°
expand_moreScrew 8
Fourth stage 29.5 lbf⋅ft
Replace screws.
Fifth stage 90°
Sixth stage 90°
expand_moreScrew 9
Seventh stage 6.64 lbf⋅ft
expand_moreAll other modifications
expand_moreScrews 1 – 8
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 90°
expand_moreScrews 9 – 10
Fourth stage 29.5 lbf⋅ft
Replace screws.
Fifth stage 90°
Sixth stage 90°
expand_moreScrews 11 – 14
expand_moreSeventh stage
First step 5.9 lbf⋅ft
Replace screws.
Second step 90°
expand_moreValve cover
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12)
First stage Tighten by hand
Gradually tighten screws crosswise.
Second stage 7.38 lbf⋅ft
2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.1–2012.3) 7.38 lbf⋅ft
Tighten cross-wise.
2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12) 6.64 lbf⋅ft
3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2007.11–2012.3) 6.64 lbf⋅ft
Gradually tighten screws crosswise.
3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2007.11–2012.3) 6.64 lbf⋅ft
Gradually tighten screws crosswise.
3.0 TDI quattro with diesel V6 3.0 L 236 HP engine (2007.11–2012.3) 6.64 lbf⋅ft
Gradually tighten screws crosswise.
expand_more3.0 TDI quattro with diesel V6 3.0 L 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM engine (2011.11–2015.12)
First stage Screw in screw(s) by hand.
Replace screws.
expand_moreSecond stage
First step 5.9 lbf⋅ft
Second step 90°
3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3) 6.64 lbf⋅ft
expand_moreAll other modifications
expand_moreAt the cylinder head
expand_moreBearing casing
First stage 5.9 lbf⋅ft
Tighten new screws in inside-to-outside order.
Second stage 90°
Valve cover locking screws 3.69 lbf⋅ft
expand_moreEngine block
expand_moreBalance shaft gear wheel
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM engine (2011.11–2015.12)
expand_moreBearing pedestal
First stage 2.95 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreCoolant pump
First stage 7.38 lbf⋅ft
Use new screw. (left-hand thread)
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12)
expand_moreBalance shaft module
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12)
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2007.11–2012.3) 16.96 lbf⋅ft
3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2007.11–2012.3) 16.96 lbf⋅ft
3.0 TDI quattro with diesel V6 3.0 L 236 HP engine (2007.11–2012.3) 16.96 lbf⋅ft
expand_more3.0 TDI quattro with diesel V6 3.0 L 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM engine (2011.11–2015.12)
Central screws 44.25 lbf⋅ft
expand_moreCentral nuts
First stage 22.13 lbf⋅ft
Shaft must be replaced when the screw connection has been loosened.
Second stage 90°
Wheel 16.96 lbf⋅ft
expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3)
Central screws 44.25 lbf⋅ft
expand_moreWheel
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
expand_moreCoolant pump
First stage 7.38 lbf⋅ft
Use new screw. (left-hand thread)
Second stage 90°
On the engine block 6.64 lbf⋅ft
expand_moreBalance shaft module
expand_moreScrews 1 – 6
First stage Screw in screw(s) finger tight.
Replace screws.
Second stage 4.43 lbf⋅ft
Fifth stage 90°
expand_moreScrews 1 – 4
Third stage 14.75 lbf⋅ft
expand_moreScrews 5 – 6
Fourth stage 9.59 lbf⋅ft
expand_moreConnecting rod bearing
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12)
First stage 22.13 lbf⋅ft
Use new screws.
Second stage 90°
expand_more2.0 TFSI flexible fuel quattro with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2009.11–2015.12)
First stage 33.19 lbf⋅ft
Replace screws.
Second stage 90°
expand_more2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12)
First stage 33.19 lbf⋅ft
Replace screws.
Second stage 90°
expand_more3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2007.11–2012.3)
First stage 25.81 lbf⋅ft
Replace screws.
Second stage 90°
expand_more3.0 TDI quattro with diesel V6 3.0 L 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM engine (2011.11–2015.12)
First stage 25.81 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCrankshaft central screws
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM engine (2011.11–2015.12)
First stage 110.63 lbf⋅ft
Use new screw.
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12)
First stage 132.76 lbf⋅ft
Use new screw.
Second stage 90°
Third stage 45°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.1–2012.3)
First stage 132.76 lbf⋅ft
Use new screw.
Second stage 90°
Third stage 45°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12)
First stage 132.76 lbf⋅ft
Use new screw.
Second stage 90°
Third stage 45°
expand_moreAll other modifications
First stage 110.63 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCrankshaft pulley
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreDrive plate
expand_moreOn crankshaft
First stage 44.25 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreEngine block closure screws
All other modifications 18.44 lbf⋅ft
Flywheel 44.25 lbf⋅ft
Replace screws.
expand_moreMain bearing
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12)
expand_moreBalance shaft module
expand_moreM7
First stage 4.43 lbf⋅ft
Replace screws.
expand_moreSecond stage
First step 9.59 lbf⋅ft
Second step 90°
expand_moreM8
First stage 4.43 lbf⋅ft
Replace screws.
expand_moreSecond stage
First step 14.75 lbf⋅ft
Second step 90°
expand_moreBearing cap
First stage 47.94 lbf⋅ft
Replace screws.
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.1–2012.3)
First stage 47.94 lbf⋅ft
Replace screws.
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12)
expand_moreBalance shaft module screws 1 – 6
First stage Screw in screw(s) by hand.
Replace screws.
Second stage 4.43 lbf⋅ft
Fifth stage 90°
expand_moreBalance shaft module screws 5 – 6
Third stage 9.59 lbf⋅ft
expand_moreBalance shaft module screws 1 – 4
Fourth stage 14.75 lbf⋅ft
expand_moreBearing cap
First stage 47.94 lbf⋅ft
Replace screws.
Second stage 90°
expand_more3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2007.11–2012.3)
First stage 22.13 lbf⋅ft
Alternately, first inside and then outside
Second stage 36.88 lbf⋅ft
Replace screws.
Third stage 90°
expand_more3.0 TDI quattro with diesel V6 3.0 L 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM engine (2011.11–2015.12)
First stage 22.13 lbf⋅ft
Replace screws.
expand_moreSecond stage
First step 36.88 lbf⋅ft
Second step 180°
expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3)
expand_moreScrews 1 – 16
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
Screws 17 – 31 16.96 lbf⋅ft
expand_moreAll other modifications
expand_moreScrews 1 – 11
First stage Screw in screw(s) by hand.
Replace screws.
expand_moreScrews 1 – 10
Second stage 47.94 lbf⋅ft
Third stage 90°
expand_moreScrew 11
Fourth stage 14.75 lbf⋅ft
Fifth stage 90°
expand_moreVibration damper
expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines
First stage 110.63 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CKVB engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreEngine control
Balance shaft timing chain guide rail 14.75 lbf⋅ft
Balance shaft timing chain tension rail 14.75 lbf⋅ft
expand_moreBottom part of the control unit housing
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM engine (2011.11–2015.12)
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
expand_more2.0 TFSI flexible fuel quattro with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2009.11–2015.12)
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreAll other modifications
First stage 5.9 lbf⋅ft
Use new screws and tighten them crosswise.
Second stage 45°
expand_moreCamshaft adjuster
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 158 HP at 4500 RPM, 250 N⋅m at 1500 RPM engine (2008.9–2012.3)
Bearing casing 6.64 lbf⋅ft
Cap 6.64 lbf⋅ft
expand_moreInlet camshaft
Central screws 25.81 lbf⋅ft
Left-hand thread
expand_moreOutlet camshaft
expand_moreCentral screws
First stage 5.9 lbf⋅ft
Use new screw.
Second stage 90°
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM engine (2011.11–2015.12)
expand_moreBearing casing
First stage 2.95 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreCap
First stage 2.95 lbf⋅ft
Second stage 45°
expand_moreInlet camshaft
Central screws 25.81 lbf⋅ft
Left-hand thread
expand_moreOutlet camshaft
Central screws 25.81 lbf⋅ft
Left-hand thread
expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3)
First stage 59 lbf⋅ft
Second stage 90°
expand_moreAll other modifications
Bearing casing 6.64 lbf⋅ft
Cap 6.64 lbf⋅ft
Central screws 25.81 lbf⋅ft
Left-hand thread
expand_moreCamshaft drive belt deflection pulley
expand_moreAll Audi diesel straight-4 2.0 L CAHA engines
expand_moreM10
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
M8 14.75 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
expand_moreM10
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
M8 14.75 lbf⋅ft
expand_moreAll other modifications
expand_moreM10
expand_moreScrews
First stage 36.88 lbf⋅ft
Use new screw.
Second stage 90°
M8 14.75 lbf⋅ft
Camshaft timing chain guide rail 14.75 lbf⋅ft
expand_moreCamshaft timing chain slip rail
1.8 TFSI quattro with gasoline straight-4 1.8 L 158 HP at 4500 RPM, 250 N⋅m at 1500 RPM engine (2008.9–2012.3) 14.75 lbf⋅ft
1.8 TFSI quattro with gasoline straight-4 1.8 L 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM engine (2011.11–2015.12) 14.75 lbf⋅ft
2.0 TFSI flexible fuel quattro with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2009.11–2015.12) 14.75 lbf⋅ft
2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12) 14.75 lbf⋅ft
2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12) 14.75 lbf⋅ft
2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12) 14.75 lbf⋅ft
expand_moreAll other modifications
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCamshaft timing chain tensioner
expand_more3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2007.11–2012.3)
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
expand_more3.0 TDI quattro with diesel V6 3.0 L 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM engine (2011.11–2015.12)
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 6.64 lbf⋅ft
expand_moreCamshaft timing chain tensioning rail
expand_more3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2007.11–2012.3)
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 14.75 lbf⋅ft
expand_moreCamshaft timing gear
expand_moreAll Audi diesel straight-4 2.0 L CAGA engines
Central screws 73.76 lbf⋅ft
expand_moreWheel
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CAHA engines
Central screws 73.76 lbf⋅ft
expand_moreWheel
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
Central screws 73.76 lbf⋅ft
Wheel 18.44 lbf⋅ft
All other modifications 16.96 lbf⋅ft
expand_moreControl drive chain tensioner
Audi gasoline V6 3.2 L CALA 261 HP 6.64 lbf⋅ft
All other modifications 8.85 lbf⋅ft
expand_moreControl drive sprocket wheel
expand_moreBearing pedestal
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreM10
First stage 22.13 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreM6
First stage 4.43 lbf⋅ft
Use new screw.
Second stage 60°
expand_moreAll other modifications
expand_moreOn bearing casing
expand_moreCentral screws
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreOn the engine block
expand_moreBearing casing
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
Central screws 33.19 lbf⋅ft
expand_moreControl drive timing chain slip rail
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
expand_moreRight
Bottom 8.85 lbf⋅ft
Use screw-locking compound.
expand_moreTop
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreRight
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreDrive chain balance shaft tensioner
expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3)
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 45°
All other modifications 62.69 lbf⋅ft
Injection pump drive belt tensioning roller 16.96 lbf⋅ft
expand_moreInlet camshaft wheel
First stage 59 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreIntermediate shaft chain sprocket
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM engine (2011.11–2015.12)
First stage 7.38 lbf⋅ft
Replace screw and intermediate wheel when loosening the screw.
Second stage for freedom from play
expand_moreThird stage
First step 18.44 lbf⋅ft
Second step 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12)
expand_moreBalance shaft module
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12)
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_more2.0 TFSI flexible fuel quattro with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2009.11–2015.12)
First stage 7.38 lbf⋅ft
Replace screw and intermediate wheel when loosening the screw.
Second stage for freedom from play
expand_moreThird stage
First step 18.44 lbf⋅ft
Second step 90°
expand_moreAll other modifications
First stage 7.38 lbf⋅ft
Replace the screws and sprocket wheel.
Second stage for freedom from play
expand_moreThird stage
First step 18.44 lbf⋅ft
Second step 90°
expand_moreOil pump drive chain tensioner
expand_more3.0 TDI quattro with diesel V6 3.0 L 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM engine (2011.11–2015.12)
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3)
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 45°
All other modifications 6.64 lbf⋅ft
expand_moreOutlet camshaft wheel
expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3)
First stage 59 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAll other modifications
expand_moreCentral screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreTension rail bearing screws
All Audi diesel V6 3.0 L CDUC engines 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CKVB engines 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CKVC engines 16.96 lbf⋅ft
All other modifications 8.85 lbf⋅ft
Use screw-locking compound.
expand_moreTiming case cover
expand_moreScrews 1 – 4
First stage 6.64 lbf⋅ft
expand_moreScrews 5 – 24
Second stage 2.21 lbf⋅ft
Replace screws.
Third stage 2.21 lbf⋅ft
Control tensioner
Fifth stage 90°
expand_moreScrews 5 – 10
Fourth stage 5.9 lbf⋅ft
expand_moreScrew 1
First stage 3.69 lbf⋅ft
Third stage 6.64 lbf⋅ft
expand_moreScrews 2 – 11
Second stage 6.64 lbf⋅ft
Tighten cross-wise.
expand_moreScrews 9 – 11
Fourth stage 14.75 lbf⋅ft
expand_moreScrew 4
Fifth stage 11.8 lbf⋅ft
expand_moreAll other modifications
M6 6.64 lbf⋅ft
M8 16.96 lbf⋅ft
expand_moreTiming case cover first cylinder row
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreTiming case cover second cylinder row
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
Toothed belt guard 7.38 lbf⋅ft
Toothed belt guard at the bottom 7.38 lbf⋅ft
Toothed belt guard center 7.38 lbf⋅ft
expand_moreToothed belt tensioning roller
expand_moreAll other modifications
First stage 14.75 lbf⋅ft
Replace nuts.
Second stage 45°
expand_moreTop part of control unit housing
expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3)
First stage 3.69 lbf⋅ft
Replace bolts.
Second stage 90°
All other modifications 6.64 lbf⋅ft
expand_moreEngine lubrication
expand_moreOil cooler
1.8 TFSI quattro with gasoline straight-4 1.8 L 158 HP at 4500 RPM, 250 N⋅m at 1500 RPM engine (2008.9–2012.3) 16.96 lbf⋅ft
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM engine (2011.11–2015.12)
First stage 5.9 lbf⋅ft
Second stage 45°
2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12) 18.44 lbf⋅ft
2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12) 18.44 lbf⋅ft
2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.1–2012.3) 18.44 lbf⋅ft
2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12) 5.16 lbf⋅ft
expand_more2.0 TFSI flexible fuel quattro with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2009.11–2015.12)
Heat-exchanger on oil filter housing 16.96 lbf⋅ft
expand_more2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12)
Heat-exchanger on oil filter housing 16.96 lbf⋅ft
All other modifications 6.64 lbf⋅ft
Oil drain plug 22.13 lbf⋅ft
Replace screws and sealing rings.
expand_moreOil filter housing
Oil filter cover 18.44 lbf⋅ft
expand_moreOn the engine block
First stage 11.06 lbf⋅ft
Tighten alternately starting from the top left
Second stage 90°
Use new screws.
Oil filter cover 18.44 lbf⋅ft
Oil filter cover 18.44 lbf⋅ft
expand_moreOn the engine block
First stage 11.06 lbf⋅ft
Tighten alternately starting from the top left
Second stage 90°
Oil filter cover 18.44 lbf⋅ft
expand_moreOn the engine block
First stage 10.33 lbf⋅ft
Use new screws and tighten them crosswise.
Second stage 90°
Oil filter cover 25.81 lbf⋅ft
Oil filter cover 25.81 lbf⋅ft
On the engine block 6.64 lbf⋅ft
Oil filter cover 18.44 lbf⋅ft
On the engine block 9.59 lbf⋅ft
expand_moreOil pump
First stage 5.9 lbf⋅ft
Use new screws
Second stage 90°
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 14.75 lbf⋅ft
expand_moreOil pump chain wheel
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 45°
First stage 22.13 lbf⋅ft
Use new screw.
Second stage 90°
All other modifications 44.25 lbf⋅ft
expand_moreOil sump
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM engine (2011.11–2015.12)
expand_moreCJEB engine top part of the oil sump (screws 1 – 14)
First stage 5.9 lbf⋅ft
Replace screws.
expand_moreCJEB engine top part of the oil sump (screws 1 – 2)
Second stage 180°
expand_moreCJEB engine top part of the oil sump (screws 3 – 9)
Third stage 45°
expand_moreCJEB engine top part of the oil sump (screws 10)
Fourth stage 180°
expand_moreCJEB engine top part of the oil sump (screws 11 – 14)
Fifth stage 90°
expand_morePlastic oil sump
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreSheet-steel sump
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12)
expand_moreAt the gearbox
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
M10 29.5 lbf⋅ft
M7 11.06 lbf⋅ft
Gradually tighten screws crosswise.
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.1–2012.3)
expand_moreAt the gearbox
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
On the engine block 11.06 lbf⋅ft
Tighten cross-wise.
expand_more3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2007.11–2012.3)
expand_moreAt the gearbox
expand_moreOil sump top part
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Tighten the new screws evenly in several steps.
Second stage 90°
Cap 25.81 lbf⋅ft
expand_moreOn the engine block
Oil sump top part 11.06 lbf⋅ft
expand_more3.0 TDI quattro with diesel V6 3.0 L 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM engine (2011.11–2015.12)
expand_moreOil sump lower part
First stage 2.21 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOil sump top part
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
Locking screws 18.44 lbf⋅ft
TDC marking.
expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3)
expand_moreOil sump lower part
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOil sump top part
First stage 3.69 lbf⋅ft
Tighten cross-wise.
Second stage 11.8 lbf⋅ft
expand_moreAll other modifications
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreOil sump top part
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreEngine management
Camshaft sensor 7.38 lbf⋅ft
expand_moreCrankshaft sensor
Audi gasoline straight-4 1.8 L CJEB 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM 7.38 lbf⋅ft
Audi diesel straight-4 2.0 L CAHA 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM 3.32 lbf⋅ft
Audi diesel straight-4 2.0 L CGLC 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM 3.32 lbf⋅ft
All other modifications 6.64 lbf⋅ft
expand_moreExhaust gas temperature sensor
expand_moreGlow plugs
All other modifications 12.54 lbf⋅ft
expand_moreKnock sensor
All other modifications 14.75 lbf⋅ft
Lambda sensor 40.57 lbf⋅ft
expand_moreEngine mounting
Engine bracket 29.5 lbf⋅ft
expand_moreEngine mounting
At the subframe 40.57 lbf⋅ft
expand_moreOn engine bracket
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreSubframe
expand_moreOn chassis
First stage 84.82 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreSubframe diagonal strut
expand_moreM12 × 42 screws
First stage 66.38 lbf⋅ft
Use new screws.
Second stage 135°
expand_moreM12 × 50 screws
First stage 66.38 lbf⋅ft
Use new screws.
Second stage 90°
expand_moreTorque arm
expand_moreAll other modifications
expand_moreOn chassis
Cross support 29.5 lbf⋅ft
On the engine block 18.44 lbf⋅ft
expand_moreExhaust system
expand_moreCatalytic converter
2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12) 16.96 lbf⋅ft
Replace the nuts and use fitting paste
2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12) 16.96 lbf⋅ft
Replace the nuts and use fitting paste
3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3) 16.96 lbf⋅ft
Replace nut.
All other modifications 29.5 lbf⋅ft
Replace nuts. Use hot screw paste.
Catalytic converter bracket 16.96 lbf⋅ft
expand_moreDiesel particulate filter
All other modifications 16.96 lbf⋅ft
Replace nuts. Use hot screw paste.
expand_moreExhaust manifold
expand_more1.8 TFSI quattro with gasoline straight-4 1.8 L 158 HP at 4500 RPM, 250 N⋅m at 1500 RPM engine (2008.9–2012.3)
expand_moreNuts
Bottom 22.13 lbf⋅ft
Replace nuts.
expand_moreTop nuts
First stage 3.69 lbf⋅ft
Replace nuts.
Second stage 8.85 lbf⋅ft
Tighten cross-wise.
Third stage 11.8 lbf⋅ft
Fourth stage 18.44 lbf⋅ft
2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12) 18.44 lbf⋅ft
Replace the nuts and use fitting paste
2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12) 18.44 lbf⋅ft
Replace the nuts and use fitting paste
2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.1–2012.3) 18.44 lbf⋅ft
Replace the nuts and use fitting paste
2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12) 18.44 lbf⋅ft
Replace nuts. Use hot screw paste.
expand_more2.0 TFSI flexible fuel quattro with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2009.11–2015.12)
expand_moreNuts
Bottom 22.13 lbf⋅ft
Replace nuts.
expand_moreTop nuts
First stage 3.69 lbf⋅ft
Replace nuts.
Second stage 8.85 lbf⋅ft
Tighten cross-wise.
Third stage 11.8 lbf⋅ft
Fourth stage 18.44 lbf⋅ft
expand_more2.0 TFSI quattro with gasoline straight-4 2.0 L 208 HP at 4300 RPM, 350 N⋅m at 1500 RPM engine (2008.6–2015.12)
expand_moreNuts
Bottom 22.13 lbf⋅ft
Replace nuts.
expand_moreTop nuts
First stage 3.69 lbf⋅ft
Replace nuts.
Second stage 8.85 lbf⋅ft
Tighten cross-wise.
Third stage 11.8 lbf⋅ft
Fourth stage 18.44 lbf⋅ft
expand_more3.0 TDI quattro with diesel V6 3.0 L 241 HP at 4000 RPM, 500 N⋅m at 1400 RPM engine (2011.11–2015.12)
At the cylinder head 18.44 lbf⋅ft
Replace nuts. Use hot screw paste.
expand_moreAt the turbocharger
First stage 22.13 lbf⋅ft
Replace screws. Use hot screw paste.
Second stage 90°
expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3)
First stage 11.06 lbf⋅ft
Replace nuts.
Second stage 18.44 lbf⋅ft
All other modifications 18.44 lbf⋅ft
Replace nuts. Use hot screw paste.
expand_moreExhaust manifold heat shields
Exhaust pipe 18.44 lbf⋅ft
Replace nuts.
Exhaust pipe bracket 16.96 lbf⋅ft
Exhaust pipe rear 18.44 lbf⋅ft
expand_moreFuel supply
expand_moreFuel lines
expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3)
High-pressure side 18.44 lbf⋅ft
expand_moreIgnition system
Spark plugs 22.13 lbf⋅ft
expand_moreStart system
expand_moreStarter
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 141 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2008.11–2015.12)
M10 47.94 lbf⋅ft
expand_moreM12
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.1–2012.3)
M10 47.94 lbf⋅ft
expand_moreM12
First stage 22.13 lbf⋅ft
Second stage 90°
expand_more2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2011.11–2015.12)
M10 47.94 lbf⋅ft
expand_moreM12
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_more3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2007.11–2012.3)
M10 47.94 lbf⋅ft
expand_moreM12
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_more3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2007.11–2012.3)
M10 47.94 lbf⋅ft
All other modifications 47.94 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2011 Audi A4 Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A4 Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2011 Audi A4 Quattro you're not only saving money, but also also improving your technical skills and learning something new.

2011 Audi A4 Quattro generations

In 2011 Audi offered 2 generations of the A4 Quattro. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Audi A4 Quattro B8 model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat