2013 Volkswagen Passat Variant Wagon B7 Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Lower section of intake manifold | 5.9 lbf⋅ft |
Upper section of intake manifold | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 6.64 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 14.75 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 29.5 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 29.5 lbf⋅ft |
All Volkswagen gasoline/natural gas straight-4 1.4 Liters CDGA engines | 29.5 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 36.88 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 7.38 lbf⋅ft |
Top | 16.96 lbf⋅ft |
Compressor belt | 16.96 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 22.13 lbf⋅ft |
Second stage | 90° |
Compressor belt screws | 16.96 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Compressor belt screws | 16.96 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | Screw in new screw(s) hand-tight. |
Screws must be replaced. | |
Second stage | Screw in screw(s) until the stop. |
Third stage | 90° detach. |
Fourth stage | 22.13 lbf⋅ft |
Fifth stage | 90° |
First stage | Screw in screw(s) until the stop. |
Screws must be replaced. | |
Second stage | 90° detach. |
First step | 22.13 lbf⋅ft |
Second step | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline/natural gas straight-4 1.4 Liters CDGA engines | 16.96 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline/natural gas straight-4 1.4 Liters CDGA engines | 18.44 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Air-conditioning compressor pressure line | 16.23 lbf⋅ft |
1.6 TDI with diesel straight-4 1.6 L 103 HP at 4400 RPM, 250 N⋅m at 1500 RPM engine (2010.8–2014.12) | 14.75 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 174 HP engine (2012.12–2014.12) | 14.75 lbf⋅ft |
3.6 FSI 4motion with gasoline vr-6 3.6 L 295 HP at 6600 RPM, 350 N⋅m at 2400 RPM engine (2011.1–2014.12) | 14.75 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 5.9 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
All other modifications | 7.38 lbf⋅ft |
Clamps | 3.69 lbf⋅ft |
Nuts | 17.7 lbf⋅ft |
Sealing rings must be replaced. | |
Screws | 6.64 lbf⋅ft |
Sealing rings must be replaced. |
First stage | 22.13 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 14.75 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 20.65 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 20.65 lbf⋅ft |
All other modifications | 13.28 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 7.38 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
Screws must be replaced. |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
Screws must be replaced. |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
All other modifications | 14.75 lbf⋅ft |
Central nuts | 70.07 lbf⋅ft |
Wheel | 14.75 lbf⋅ft |
Screws must be replaced. |
Injection hoses | 20.65 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Pressure tube connection | 29.5 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
Screws must be replaced. |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
On high-pressure pump | 29.5 lbf⋅ft |
1.4 TSI MultiFuel with flexfuel straight-4 1.4 L 158 HP at 5800 RPM, 240 N⋅m at 2000 RPM engine (2010.11–2014.12) | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Lower nuts | 22.13 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. | |
Upper nuts | 18.44 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. |
Lower nuts | 22.13 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. | |
Upper nuts | 18.44 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 18.44 lbf⋅ft |
Tighten new nuts evenly in several steps. | |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 18.44 lbf⋅ft |
Tighten new nuts evenly in several steps. |
At the turbocharger | 14.75 lbf⋅ft |
On the engine block | 29.5 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 16.23 lbf⋅ft |
On the engine block | 22.13 lbf⋅ft |
Sealing rings must be replaced. |
At the turbocharger | 12.54 lbf⋅ft |
Use new seal and screws. |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 6.64 lbf⋅ft |
Tighten cross-wise. | |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 6.64 lbf⋅ft |
All Volkswagen gasoline/natural gas straight-4 1.4 Liters CDGA engines | 5.9 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 5.9 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 14.75 lbf⋅ft |
All other modifications | 17.7 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. Left-hand thread. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Second stage | 45° |
First stage | Tighten by hand |
See figure 1. | |
Second stage | 7.38 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
First stage | 11.06 lbf⋅ft |
Screws must be replaced. See figure 2. | |
Second stage | 22.13 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 25.81 lbf⋅ft |
Screws must be replaced. See figure 3. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 4. | |
Second stage | 90° |
Third stage | 90° |
First step | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second step | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 4. | |
Second stage | 90° |
Third stage | 90° |
First step | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second step | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 5. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 5. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 5. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
Valve cover locking screws | 3.69 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. Left-hand thread. | |
Second stage | 90° |
Bearing casing | 6.64 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws and seals must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 88.51 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Engine block closure screws | 22.13 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | Screw in screw(s) by hand. |
Tighten new screws in inside-to-outside order. |
First step | 47.94 lbf⋅ft |
M10 | |
Second step | 90° |
M10 |
First step | 14.75 lbf⋅ft |
M8 | |
Second step | 90° |
M8 |
First stage | Screw in screw(s) by hand. |
Tighten new screws in inside-to-outside order. |
First step | 47.94 lbf⋅ft |
M10 | |
Second step | 90° |
M10 |
First step | 14.75 lbf⋅ft |
M8 | |
Second step | 90° |
M8 |
First stage | 4.43 lbf⋅ft |
Screws must be replaced. See figure 6. | |
Second stage | 9.59 lbf⋅ft |
M7 |
M8 | 14.75 lbf⋅ft |
Other screws | 90° |
First stage | 4.43 lbf⋅ft |
Screws must be replaced. See figure 7. | |
Second stage | 9.59 lbf⋅ft |
M7 |
M8 | 14.75 lbf⋅ft |
Other screws | 90° |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 4.43 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. |
M7 | 9.59 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 110.63 lbf⋅ft |
Use new seal and screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Balance shaft timing chain guide rail | 14.75 lbf⋅ft |
Balance shaft timing chain tension rail | 14.75 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | 2.95 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. Tighten new screws crosswise. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Bearing pedestal at the cylinder head | 6.64 lbf⋅ft |
Camshaft adjuster valve | 6.64 lbf⋅ft |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
M6 | 6.64 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
Bearing pedestal | 6.64 lbf⋅ft |
Camshaft adjuster valve | 6.64 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. Left-hand thread. | |
Second stage | 90° |
Top | 11.06 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Bottom | 14.75 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Camshaft timing chain guide rail | 14.75 lbf⋅ft |
M8 | 7.38 lbf⋅ft |
M10 | 16.96 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 36.88 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 7.38 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Central screws | 73.76 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
Chain tensioner | 6.64 lbf⋅ft |
3.6 FSI 4motion with gasoline vr-6 3.6 L 295 HP at 6600 RPM, 350 N⋅m at 2400 RPM engine (2011.1–2014.12) | 5.9 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Second stage | 90° |
3.6 FSI 4motion with gasoline vr-6 3.6 L 295 HP at 6600 RPM, 350 N⋅m at 2400 RPM engine (2011.1–2014.12) | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 62.69 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 47.94 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 62.69 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 25.81 lbf⋅ft |
Left-hand thread | |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 25.81 lbf⋅ft |
Left-hand thread |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. Left-hand thread. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screw and intermediate wheel when loosening the screw. | |
Second stage | for freedom from play |
First step | 22.13 lbf⋅ft |
Second step | 90° |
First stage | 7.38 lbf⋅ft |
The screws and sprocket wheel must be replaced. | |
Second stage | for freedom from play |
First step | 22.13 lbf⋅ft |
Second step | 90° |
First stage | 7.38 lbf⋅ft |
Replace screw and intermediate wheel when loosening the screw. | |
Second stage | for freedom from play |
First step | 22.13 lbf⋅ft |
Second step | 90° |
First stage | 66.38 lbf⋅ft |
The screws and sprocket wheel must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 11.06 lbf⋅ft |
All Volkswagen gasoline/natural gas straight-4 1.4 Liters CDGA engines | 11.06 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline/natural gas straight-4 1.4 Liters CDGA engines | 14.75 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 14.75 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
Toothed belt guard | 6.64–7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 5.9 lbf⋅ft |
Gradually tighten screws crosswise. | |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 6.64 lbf⋅ft |
See figure 10. | |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 6.64 lbf⋅ft |
Tighten cross-wise. See figure 10. | |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 6.64 lbf⋅ft |
See figure 10. |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 11.06 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 5.9 lbf⋅ft |
All other modifications | 8.11 lbf⋅ft |
Oil drain plug | 22.13 lbf⋅ft |
Screws must be replaced. |
Oil filter cover | 18.44 lbf⋅ft |
Oil filter drain plug | 7.38 lbf⋅ft |
On the engine block | 16.96 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Screws must be replaced. Tighten new screws crosswise. | |
Second stage | 90° |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 5.9 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 11.8 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 10.33 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 11.06 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 11.06 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
At the gearbox | 33.19 lbf⋅ft |
On the engine block | 9.59 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 9.59 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 9.59 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
Camshaft sensor | 7.38 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 7.38 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
On exhaust manifold | 33.19 lbf⋅ft |
Use hot screw paste | |
On particle filter | 44.25 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 44.25 lbf⋅ft |
Glow plugs | 13.28 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 40.57 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 40.57 lbf⋅ft |
All other modifications | 36.88 lbf⋅ft |
Use hot screw paste |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
M8 | 18.44 lbf⋅ft |
Nuts must be replaced. | |
M10 | 29.5 lbf⋅ft |
Nuts must be replaced. |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 29.5 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. | |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 29.5 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. | |
All other modifications | 16.96 lbf⋅ft |
Nuts must be replaced. |
All Volkswagen diesel straight-4 2.0 Liters CFFB engines | 5.16 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 5.16 lbf⋅ft |
Lower nuts | 22.13 lbf⋅ft |
Nuts must be replaced. | |
Upper nuts | 18.44 lbf⋅ft |
Tighten new nuts evenly in several steps. |
All other modifications | 18.44 lbf⋅ft |
Nuts must be replaced. |
Exhaust manifold heat shields | 17.7 lbf⋅ft |
Exhaust pipe | 18.44 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Screws must be replaced. |
Particle filter bracket | 18.44 lbf⋅ft |
High-pressure side | 20.65 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | 66.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Natural gas tank tightening strap | 14.75 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 22.13 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 55.32 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Volkswagen Passat Variant Wagon user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Diesel Exhaust Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Passat Variant Wagon service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Volkswagen Passat Variant Wagon you're not only saving money, but also also improving your technical skills and learning something new.
Volkswagen Passat Variant Wagon B7 model years
logo_volkswagen 2010logo_volkswagen 2011logo_volkswagen 2012-
logo_volkswagen 2013 logo_volkswagen 2014