2016 Volkswagen Beetle A5 Convertible First generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
All Volkswagen gasoline straight-4 1.4 Liters CAVD engines | 14.75 lbf⋅ft |
First stage | 2.21 lbf⋅ft |
Second stage | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CNWA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTKA engines | 14.75 lbf⋅ft |
First stage | Screw in manually up to stop. |
Tighten in steps from inside to outside. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | Screw in new screw(s) manually as far as it goes. |
Tighten crosswise from inside to outside. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
All other modifications | 6.64 lbf⋅ft |
First stage | Screw in screw manually up to stop. |
Second stage | 14.75 lbf⋅ft |
First stage | screw in manually up to stop |
Second stage | 14.75 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Without air-conditioning system | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 18.44 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 25.81 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 25.81 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | Tighten by hand |
Second stage | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 25.81 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCTA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZA engines | 7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
First stage | 22.13 lbf⋅ft |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 16.96 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | Screw in new screw(s) hand-tight. |
Replace screws. | |
Second stage | Screw in screw(s) until the stop. |
Third stage | 90° detach. |
Fourth stage | 22.13 lbf⋅ft |
Fifth stage | 90° |
First stage | Screw in screw(s) until the stop. |
Replace screws. | |
Second stage | 90° detach. |
Third stage | 22.13 lbf⋅ft |
Fourth stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CAVD engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CNWA engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTKA engines | 16.96 lbf⋅ft |
First stage | Screw in screw manually up to stop. |
See figure 1. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
Screws 4 and 5 | |
Fourth stage | 45° |
Screws 1, 2, 3, and 6 |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Steel screws | 18.44 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Use new screw(s). Tighten in order from top to bottom. | |
Second stage | 90° |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Use new screw(s). Tighten in order from top to bottom. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPKA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPRA engines | 14.75 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 18.44 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFFB engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CJAA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPKA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPLA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPPA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPRA engines | 18.44 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUUA engines | 14.75 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
With freewheel | 47.94 lbf⋅ft |
Without freewheel | 59 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Use new screw(s). Tighten in order from top to bottom. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Use new screw(s). Tighten in order from top to bottom. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Screw in screw manually up to stop. |
See figure 1. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
Screws 4 and 5 | |
Fourth stage | 45° |
Screws 1, 2, 3, and 6 |
All other modifications | 18.44 lbf⋅ft |
Tensioning device for air-conditioning compressor auxiliary drive belt | 25.81 lbf⋅ft |
CBFA engine | 6.64 lbf⋅ft |
CCTA engine | 6.64 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Second stage | 180° |
All other modifications | 7.38 lbf⋅ft |
Clamps | 5.16 lbf⋅ft |
First stage | Screw in screw manually up to stop. |
Second stage | 14.75 lbf⋅ft |
Exhaust gas return valve | 6.64 lbf⋅ft |
Exhaust recirculation pipe | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 2.58 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 2.58 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 2.58 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPKA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPLA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPPA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPRA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 6.64 lbf⋅ft |
Tighten in several steps. | |
All other modifications | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAVD engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CNWA engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTKA engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 18.44 lbf⋅ft |
All other modifications | 20.65 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Short screws | |
Third stage | 180° |
Long screws |
First stage | Screw in screw(s) by hand. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
Screw connections need to be loosened or tightened in steps of 90°. | |
Third stage | 90° |
All other modifications | 14.75 lbf⋅ft |
Use new screws and snug them down crosswise. |
Central nuts | 70.07 lbf⋅ft |
Wheel | 14.75 lbf⋅ft |
Replace screws. |
Injection hoses | 20.65 lbf⋅ft |
Nuts | 7.38 lbf⋅ft |
Screws | 3.69 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 270° |
First stage | 6.64 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Pressure tube connection | 22.13 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPKA engines | 4.06 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPLA engines | 5.16 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPPA engines | 5.16 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPRA engines | 4.06 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUUA engines | 5.9 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUUB engines | 5.9 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CVCA engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 5.9 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters DELA engines | 5.9 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Charge air compressor | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 8.11 lbf⋅ft |
Replace the nuts and tighten alternately | |
Second stage | 16.23 lbf⋅ft |
Third stage | 16.23 lbf⋅ft |
Control tensioner |
First stage | 8.11 lbf⋅ft |
Tighten the nuts gradually and alternately. | |
Second stage | 16.23 lbf⋅ft |
Third stage | 16.23 lbf⋅ft |
Control tensioner |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. |
First stage | Screw in new screw(s) manually as far as it goes. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
At turbocharger | |
Third stage | 29.5 lbf⋅ft |
On the engine block. Tighten cross-wise. |
First stage | Screw in new screw(s) manually as far as it goes. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
At turbocharger | |
Third stage | 29.5 lbf⋅ft |
On the engine block. Tighten cross-wise. |
All other modifications | 22.13 lbf⋅ft |
Turbocharger coolant feed line | 6.64 lbf⋅ft |
Turbocharger coolant return line | 6.64 lbf⋅ft |
At the turbocharger | 16.23 lbf⋅ft |
On the engine block | 22.13 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 16.23 lbf⋅ft |
On the engine block | 22.13 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
At the turbocharger | 6.64 lbf⋅ft |
On the engine block | 18.44 lbf⋅ft |
On the engine block | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 6.64 lbf⋅ft |
At the turbocharger | 10.33 lbf⋅ft |
On the engine block | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAVD engines | 5.9 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 7.38 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFFB engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CNWA engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTKA engines | 5.9 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
First stage | Screw in screw(s) by hand. |
Screws 1 - 5 | |
Second stage | 7.38 lbf⋅ft |
Screws 1 - 5 | |
Third stage | 360° detach |
Screws 1 - 5 | |
Fourth stage | Pretension coolant pump with 30 Nm using a torque wrench and keep up pretension. |
Fifth stage | 7.38 lbf⋅ft |
Screws 1, 2, and 5. The tightening sequence is: 2 - 1 - 5. | |
Sixth stage | 8.85 lbf⋅ft |
Screws 1 – 5. The tightening sequence is: 3 - 4 - 5 - 1 - 2. |
Coolant pump | 5.16 lbf⋅ft |
Note correct order of tensioning. See figure 2. |
All other modifications | 6.64 lbf⋅ft |
Gradually tighten screws crosswise. |
Coolant pump pulley | 17.7 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUUA engines | 14.75 lbf⋅ft |
Replace sealing rings. | |
All Volkswagen diesel straight-4 2.0 Liters CUUB engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CVCA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 5.16 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters DELA engines | 14.75 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Tighten crosswise from the outside to the inside. |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 12.54 lbf⋅ft |
Use new screw. (left-hand thread) | |
All Volkswagen gasoline straight-4 2.0 Liters CCTA engines | 12.54 lbf⋅ft |
Use new screw. (left-hand thread) | |
All Volkswagen gasoline straight-4 2.0 Liters CCZA engines | 12.54 lbf⋅ft |
Use new screw. (left-hand thread) |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
All Volkswagen diesel straight-4 2.0 Liters CUUA engines | 5.9 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
Radiator mounting | 7.38 lbf⋅ft |
First stage | Tighten by hand |
Tighten screws evenly. See figure 3. | |
Second stage | 7.38 lbf⋅ft |
First stage | Tighten bolt(s) until hand-tight. |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
Tighten gradually and alternately from inside to outside. | |
Third stage | 90° |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 5.9 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
All Volkswagen diesel straight-4 2.0 Liters CFFB engines | 7.38 lbf⋅ft |
Tighten screws evenly. See figure 3. | |
All Volkswagen diesel straight-4 2.0 Liters CJAA engines | 7.38 lbf⋅ft |
Tighten screws evenly. See figure 3. | |
All Volkswagen diesel straight-4 2.0 Liters CUUA engines | 7.38 lbf⋅ft |
Tighten screws evenly. See figure 3. |
First stage | 7.38 lbf⋅ft |
Replace screws. See figure 4. | |
Second stage | 180° |
Cap | 7.38 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 5. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 6. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 5.9 lbf⋅ft |
Replace screws. | |
Fifth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 7. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 7.38 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 8. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 8. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 9. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 2.95 lbf⋅ft |
Fifth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 9. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 2.95 lbf⋅ft |
Replace screws. | |
Fifth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 9. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 2.95 lbf⋅ft |
Fifth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 10. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 10. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 10. | |
Second stage | 90° |
Third stage | 90° |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 5.39 in |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 6.61 in |
All Volkswagen diesel straight-4 2.0 Liters CFFB engines | 5.39 in |
All Volkswagen diesel straight-4 2.0 Liters CJAA engines | 5.39 in |
All Volkswagen gasoline straight-4 2.0 Liters CPLA engines | 4.53 in |
All Volkswagen gasoline straight-4 2.0 Liters CPPA engines | 4.53 in |
All other modifications | 4.02 in |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 6.64 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 7.38 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 7.38 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 7.38 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
All Volkswagen diesel straight-4 2.0 Liters CFFB engines | 6.64 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
All Volkswagen diesel straight-4 2.0 Liters CJAA engines | 6.64 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
First stage | Tighten by hand |
See figure 11. | |
Second stage | 5.9 lbf⋅ft |
First stage | Tighten by hand |
See figure 11. | |
Second stage | 5.9 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUUA engines | 6.64 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Crankcase ventilation | 6.64 lbf⋅ft |
First stage | 110.63 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
First stage | 88.51 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 88.51 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 132.76 lbf⋅ft |
Use new screw. | |
Second stage | 135° |
First stage | 132.76 lbf⋅ft |
Replace screws. | |
Second stage | 135° |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 110.63 lbf⋅ft |
Replace screws and oil sealing rings. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
use only property class 10.9 |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Engine block closure screws | 22.13 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Screw in screw(s) by hand. |
Tighten new screws in inside-to-outside order. | |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 14.75 lbf⋅ft |
Replace screws. | |
Fifth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | Component must not be knocked down. |
Variant 1 | 4.43 lbf⋅ft |
Screws 1 - 8. Use new screw(s). See figure 12. | |
Variant 2 | 4.43 lbf⋅ft |
Screws 1 - 6. Use new screw(s). |
Second stage | 9.59 lbf⋅ft |
M7 screws | |
Third stage | 14.75 lbf⋅ft |
M8 screws | |
Fourth stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace screws. | |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 14.75 lbf⋅ft |
Fifth stage | 90° |
First stage | Tighten by hand |
Tighten new screws in inside-to-outside order. | |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 14.75 lbf⋅ft |
Fifth stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace screws. | |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 14.75 lbf⋅ft |
Fifth stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | Component must not be knocked down. |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Balance shaft timing chain guide rail | 14.75 lbf⋅ft |
Balance shaft timing chain tension rail | 14.75 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. See figure 13. | |
Second stage | 45° |
First stage | Tighten by hand |
Second stage | 7.38 lbf⋅ft |
Third stage | 18.44 lbf⋅ft |
First stage | Tighten by hand |
Replace screws. See figure 14. | |
Second stage | 3.69 lbf⋅ft |
Third stage | 30° |
First stage | 5.9 lbf⋅ft |
Gradually tighten screws crosswise. | |
Second stage | 45° |
All Volkswagen diesel straight-4 2.0 Liters CUUB engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CVCA engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters DELA engines | 14.75 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Camshaft timing chain slip rail | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 44.25 lbf⋅ft |
First stage | 2.95 lbf⋅ft |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Camshaft timing chain tensioning rail | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
All Volkswagen diesel straight-4 2.0 Liters CUUB engines | 73.76 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CVCA engines | 73.76 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters DELA engines | 73.76 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 7.38 lbf⋅ft |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Control drive chain tensioning rail | 14.75 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 18.44 lbf⋅ft |
Third stage | 90° |
Control drive timing chain slip rail | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 3.69 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPLA engines | 62.69 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPPA engines | 62.69 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 62.69 lbf⋅ft |
All other modifications | 47.94 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 135° |
Cap | 14.75 lbf⋅ft |
Replace sealing rings. |
First stage | 29.5 lbf⋅ft |
Use new screw. (left-hand thread) | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screw and intermediate wheel when loosening the screw. | |
Second stage | for freedom from play |
Third stage | 22.13 lbf⋅ft |
Fourth stage | 90° |
Oil pump drive chain tensioner | 6.64 lbf⋅ft |
Replace screws. |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
M10 | 36.88 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
Toothed belt guard | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
Top part of control unit housing | 6.64 lbf⋅ft |
Tighten screws crosswise. |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 8.11 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCTA engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZA engines | 11.06 lbf⋅ft |
CFFB engine | 8.11 lbf⋅ft |
CJAA engine | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Second stage | 45° |
All Volkswagen diesel straight-4 2.0 Liters CUUA engines | 8.11 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUUB engines | Component must not be knocked down. |
All Volkswagen diesel straight-4 2.0 Liters CVCA engines | Component must not be knocked down. |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Volkswagen diesel straight-4 2.0 Liters DELA engines | Component must not be knocked down. |
All other modifications | 5.9 lbf⋅ft |
Oil drain plug | 22.13 lbf⋅ft |
Use new screw. |
All Volkswagen gasoline straight-4 1.8 Liters CPKA engines | 18.44 lbf⋅ft |
Replace the O ring. | |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 18.44 lbf⋅ft |
Slightly oil sealing lips. |
Oil filter cover | 18.44 lbf⋅ft |
Replace the O ring. | |
Oil filter drain plug | 3.69 lbf⋅ft |
Replace the O ring. |
Oil filter cover | 18.44 lbf⋅ft |
Slightly oil sealing lips. | |
Oil filter drain plug | 3.69 lbf⋅ft |
Replace the O ring. |
All other modifications | 14.75 lbf⋅ft |
Slightly oil sealing lips. |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
First stage | Tighten by hand |
Tighten screws crosswise. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Tighten screws crosswise. | |
Second stage | 90° |
First stage | 11.06 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
Oil pressure sensor | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 11.8 lbf⋅ft |
M6 screws | 6.64 lbf⋅ft |
M8 screws | 14.75 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Volkswagen diesel straight-4 2.0 Liters CFFB engines | 6.64 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CJAA engines | 11.06 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Second stage | 90° |
All Volkswagen diesel straight-4 2.0 Liters CUUA engines | 11.8 lbf⋅ft |
First stage | 8.85 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 7.38 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
Oil sump lower part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. | |
Oil sump top part | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 9.59 lbf⋅ft |
Tighten the new screws evenly in several steps. |
At the gearbox | 29.5 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 11.06 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use sealant. | |
Second stage | 29.5 lbf⋅ft |
At the gearbox | |
Third stage | 9.59 lbf⋅ft |
Tighten the screws crosswise. |
Second stage | Screw in screw(s) by hand. |
Fifth stage | 29.5 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Replace screws. See figure 26. | |
Third stage | 5.9 lbf⋅ft |
Fourth stage | 90° |
First stage | Screw in screw(s) by hand. |
Note correct order of tensioning. See figure 27. | |
Second stage | 8.85 lbf⋅ft |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 9.59 lbf⋅ft |
First stage | Tighten by hand |
Second stage | 33.19 lbf⋅ft |
Camshaft sensor | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPKA engines | 2.77 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPRA engines | 2.77 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 1.84 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUUB engines | 6.64 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CVCA engines | 6.64 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters DELA engines | 6.64 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCTA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPKA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPLA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPPA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPRA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 6.64 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
Downstream of catalytic converter | 44.25 lbf⋅ft |
Use hot screw paste | |
Upstream of catalytic converter | 33.19 lbf⋅ft |
Use hot screw paste |
With pressure sensor | 8.85 lbf⋅ft |
Without pressure sensor | 12.54 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCTA engines | 16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZA engines | 16.23 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAVD engines | 36.88 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 36.88 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFFB engines | 36.88 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CJAA engines | 38.35 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CNWA engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTKA engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 33.19 lbf⋅ft |
Use hot screw paste | |
All Volkswagen diesel straight-4 2.0 Liters CUUA engines | 36.88 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUUB engines | 38.35 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CVCA engines | 38.35 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters DELA engines | 38.35 lbf⋅ft |
All other modifications | 40.57 lbf⋅ft |
First stage | 5.16 lbf⋅ft |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 90° |
First stage | 5.16 lbf⋅ft |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 51.63 lbf⋅ft |
Use new screws. | |
Second stage | 180° |
First stage | 66.38 lbf⋅ft |
Use new screws. | |
Second stage | 45° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Property class 10.9 |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 29.5 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Volkswagen gasoline straight-4 2.0 Liters CCTA engines | 29.5 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Volkswagen gasoline straight-4 2.0 Liters CCZA engines | 29.5 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Volkswagen gasoline straight-4 1.8 Liters CPKA engines | 11.06 lbf⋅ft |
Use new parts. | |
All Volkswagen gasoline straight-4 2.0 Liters CPLA engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPPA engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 11.06 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
Replace nuts. Use hot screw paste. |
Catalytic converter bracket | 16.23 lbf⋅ft |
Clamps | 5.16 lbf⋅ft |
Use new parts. | |
Retaining clamp | 18.44 lbf⋅ft |
Clamps | 5.16 lbf⋅ft |
Use new parts. | |
Retaining clamp | 18.44 lbf⋅ft |
First stage | Screw in screw manually up to stop. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
Differential pressure sensor lines | 25.81 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAVD engines | 8.85 lbf⋅ft |
Replace the nuts and tighten alternately | |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 17.7 lbf⋅ft |
Replace nuts. |
First stage | 3.69 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
Second stage | 8.85 lbf⋅ft |
Third stage | 11.8 lbf⋅ft |
Fourth stage | 18.44 lbf⋅ft |
Lower nuts | 22.13 lbf⋅ft |
Replace nuts. Use hot screw paste. |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 16.96 lbf⋅ft |
Replace nuts. | |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 16.96 lbf⋅ft |
Replace nuts. |
First stage | 13.28 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
Second stage | 8.85 lbf⋅ft |
Tighten crosswise from inside to outside. | |
Third stage | 8.85 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 16.96 lbf⋅ft |
Replace nuts. | |
All Volkswagen diesel straight-4 2.0 Liters CFFB engines | 17.7 lbf⋅ft |
Replace nuts. | |
All Volkswagen diesel straight-4 2.0 Liters CJAA engines | 16.96 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Volkswagen gasoline straight-4 1.4 Liters CNWA engines | 8.85 lbf⋅ft |
Replace the nuts and tighten alternately | |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 8.85 lbf⋅ft |
Replace the nuts and tighten alternately | |
All Volkswagen gasoline straight-4 1.4 Liters CTKA engines | 8.85 lbf⋅ft |
Replace the nuts and tighten alternately |
First stage | 8.11 lbf⋅ft |
Replace the nuts and tighten alternately | |
Second stage | 16.23 lbf⋅ft |
Third stage | 16.23 lbf⋅ft |
Control tensioner |
All Volkswagen gasoline straight-4 1.8 Liters CPKA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPRA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 14.75 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPKA engines | 25.81 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 25.81 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUUA engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUUB engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CVCA engines | 14.75 lbf⋅ft |
At the subframe | 14.75 lbf⋅ft |
On chassis | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters DELA engines | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 25.81 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 22.13 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
First stage | Screw in manually up to stop. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
Clamps | 5.16 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 7.38 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFFB engines | 7.38 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CJAA engines | 7.38 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUUA engines | 5.9 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUUB engines | 5.9 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CVCA engines | 5.9 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters DELA engines | 5.9 lbf⋅ft |
All other modifications | 2.21 lbf⋅ft |
Fuel filter cover | 3.69 lbf⋅ft |
Preliminary feed pump | 81.13 lbf⋅ft |
Replace sealing rings. |
All Volkswagen gasoline straight-4 1.8 Liters CPKA engines | 22.13 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPLA engines | 22.13 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CPPA engines | 22.13 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CPRA engines | 22.13 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 22.13 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CZDA engines | 22.13 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CULC engines | 59 lbf⋅ft |
M12 | 55.32 lbf⋅ft |
M12 | 59 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 55.32 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 Volkswagen Beetle A5 Convertible user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Beetle A5 Convertible service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2016 Volkswagen Beetle A5 Convertible you're not only saving money, but also also improving your technical skills and learning something new.