in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
Bleed valve 7.38 lbf⋅ft
Brake hose 25.81 lbf⋅ft
Brake line 10.33 lbf⋅ft
Brake wear sensor 5.9 lbf⋅ft
Front axle brake caliper 22.13 lbf⋅ft
Front axle brake caliper mounting support 147.51 lbf⋅ft
Clean the thread.
expand_moreFront axle brake disc
All Volkswagen diesel straight-4 1.6 Liters CAYC engines 5.9 lbf⋅ft
All other modifications 2.95 lbf⋅ft
Wheel speed sensor 5.9 lbf⋅ft
expand_moreFront axle steering
Lower steering column joint 22.13 lbf⋅ft
Use new screw.
Steering column 14.75 lbf⋅ft
Use new screws.
expand_moreSteering gear
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
Steering gear heat protection plate 4.43 lbf⋅ft
expand_moreSteering wheel
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreTrack rod end on stub axle
First stage 14.75 lbf⋅ft
Replace nuts.
Second stage 90°
Track rod end on track rod 51.63 lbf⋅ft
Track rod on steering gear 73.76 lbf⋅ft
expand_moreFront axle suspension
Shock-absorber piston rod 44.25 lbf⋅ft
Replace nuts.
expand_moreSuspension strut
expand_moreOn chassis
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOn stub axle
First stage 51.63 lbf⋅ft
Replace nuts.
Second stage 90°
expand_moreWheel suspension
expand_moreFront axle drive shaft
expand_moreAt the gearbox
M10 51.63 lbf⋅ft
Tighten the new screws evenly in several steps.
M8 29.5 lbf⋅ft
Tighten the new screws evenly in several steps.
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Replace screws.
Second stage 180°
Stabiliser mounting at the stabiliser 47.94 lbf⋅ft
Stabiliser mounting at suspension strut 47.94 lbf⋅ft
Replace nuts.
expand_moreStabilizer mounting at the subframe
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
Support joint at the stub axle 44.25 lbf⋅ft
Replace nuts.
Support joint at the transverse control arm 73.76 lbf⋅ft
Replace nuts.
expand_moreTransverse control arm
First stage 51.63 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreWheel hub wheel bearing
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreWheel bearing unit
First stage 51.63 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreWheels and tires
Wheel attachment 103.26 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 Volkswagen Beetle A5 Convertible user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Beetle A5 Convertible service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2016 Volkswagen Beetle A5 Convertible you're not only saving money, but also also improving your technical skills and learning something new.

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat