2011 Volkswagen Beetle A5 Convertible First generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
All Volkswagen gasoline straight-4 1.4 Liters CAVD engines | 14.75 lbf⋅ft |
First stage | 2.21 lbf⋅ft |
Second stage | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CNWA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTKA engines | 14.75 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Without air-conditioning system | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 18.44 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 25.81 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 25.81 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | Tighten by hand |
Second stage | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 25.81 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCTA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZA engines | 7.38 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | Screw in new screw(s) hand-tight. |
Replace screws. | |
Second stage | Screw in screw(s) until the stop. |
Third stage | 90° detach. |
Fourth stage | 22.13 lbf⋅ft |
Fifth stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CAVD engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CNWA engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTKA engines | 16.96 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Use new screw(s). Tighten in order from top to bottom. | |
Second stage | 90° |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 18.44 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 18.44 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
With freewheel | 47.94 lbf⋅ft |
Without freewheel | 59 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Use new screw(s). Tighten in order from top to bottom. | |
Second stage | 90° |
All other modifications | 18.44 lbf⋅ft |
Tensioning device for air-conditioning compressor auxiliary drive belt | 25.81 lbf⋅ft |
CBFA engine | 6.64 lbf⋅ft |
CCTA engine | 6.64 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
All other modifications | 7.38 lbf⋅ft |
Clamps | 5.16 lbf⋅ft |
First stage | Screw in screw manually up to stop. |
Second stage | 14.75 lbf⋅ft |
Exhaust gas return valve | 6.64 lbf⋅ft |
Exhaust recirculation pipe | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 2.58 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 2.58 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 2.58 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAVD engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CNWA engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTKA engines | 13.28 lbf⋅ft |
All other modifications | 20.65 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Use new screws and snug them down crosswise. |
Central nuts | 70.07 lbf⋅ft |
Wheel | 14.75 lbf⋅ft |
Replace screws. |
Injection hoses | 20.65 lbf⋅ft |
Nuts | 7.38 lbf⋅ft |
Screws | 3.69 lbf⋅ft |
First stage | 6.64 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Pressure tube connection | 22.13 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Charge air compressor | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. |
All other modifications | 22.13 lbf⋅ft |
Turbocharger coolant feed line | 6.64 lbf⋅ft |
Turbocharger coolant return line | 6.64 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
At the turbocharger | 10.33 lbf⋅ft |
On the engine block | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAVD engines | 5.9 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CNWA engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTKA engines | 5.9 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Gradually tighten screws crosswise. |
Coolant pump pulley | 17.7 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Tighten crosswise from the outside to the inside. |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 12.54 lbf⋅ft |
Use new screw. (left-hand thread) | |
All Volkswagen gasoline straight-4 2.0 Liters CCTA engines | 12.54 lbf⋅ft |
Use new screw. (left-hand thread) | |
All Volkswagen gasoline straight-4 2.0 Liters CCZA engines | 12.54 lbf⋅ft |
Use new screw. (left-hand thread) |
First stage | 7.38 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
All other modifications | 3.69 lbf⋅ft |
Radiator mounting | 7.38 lbf⋅ft |
First stage | Tighten by hand |
Tighten screws evenly. See figure 1. | |
Second stage | 7.38 lbf⋅ft |
First stage | Tighten bolt(s) until hand-tight. |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
Tighten gradually and alternately from inside to outside. | |
Third stage | 90° |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 5.9 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
Cap | 7.38 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 2. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 5.9 lbf⋅ft |
Replace screws. | |
Fifth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 4. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 7.38 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 5. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 5. | |
Second stage | 90° |
Third stage | 90° |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 5.39 in |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 6.61 in |
All other modifications | 4.02 in |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 6.64 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 7.38 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 7.38 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 7.38 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Crankcase ventilation | 6.64 lbf⋅ft |
First stage | 110.63 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
First stage | 88.51 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 110.63 lbf⋅ft |
Replace screws and oil sealing rings. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
use only property class 10.9 |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Engine block closure screws | 22.13 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Screw in screw(s) by hand. |
Tighten new screws in inside-to-outside order. | |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 14.75 lbf⋅ft |
Replace screws. | |
Fifth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | Component must not be knocked down. |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Balance shaft timing chain guide rail | 14.75 lbf⋅ft |
Balance shaft timing chain tension rail | 14.75 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. See figure 6. | |
Second stage | 45° |
First stage | Tighten by hand |
Second stage | 7.38 lbf⋅ft |
Third stage | 18.44 lbf⋅ft |
First stage | Tighten by hand |
Replace screws. See figure 7. | |
Second stage | 3.69 lbf⋅ft |
Third stage | 30° |
First stage | 5.9 lbf⋅ft |
See figure 8. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
See figure 9. | |
Second stage | 45° |
Third stage | 45° |
Screws 1 and 4 |
M8 | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Camshaft timing chain slip rail | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 44.25 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Camshaft timing chain tensioning rail | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Central screws | 73.76 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 7.38 lbf⋅ft |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Control drive chain tensioning rail | 14.75 lbf⋅ft |
Control drive timing chain slip rail | 14.75 lbf⋅ft |
All other modifications | 47.94 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Use new screw. (left-hand thread) | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screw and intermediate wheel when loosening the screw. | |
Second stage | for freedom from play |
Third stage | 22.13 lbf⋅ft |
Fourth stage | 90° |
Oil pump drive chain tensioner | 6.64 lbf⋅ft |
Replace screws. |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
M10 | 36.88 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
Toothed belt guard | 7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
Top part of control unit housing | 6.64 lbf⋅ft |
Tighten screws crosswise. |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 8.11 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCTA engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZA engines | 11.06 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
Oil drain plug | 22.13 lbf⋅ft |
Use new screw. |
All other modifications | 14.75 lbf⋅ft |
Slightly oil sealing lips. |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 18.44 lbf⋅ft |
Oil pressure sensor | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 11.8 lbf⋅ft |
M6 screws | 6.64 lbf⋅ft |
M8 screws | 14.75 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
First stage | 11.06 lbf⋅ft |
Replace screws. See figure 10. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. See figure 11. | |
Second stage | 45° |
First stage | 11.06 lbf⋅ft |
Replace screws. See figure 12. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. See figure 13. | |
Second stage | 45° |
First stage | 11.06 lbf⋅ft |
Replace screws. See figure 14. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. See figure 15. | |
Second stage | 45° |
Oil sump lower part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. | |
Oil sump top part | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 9.59 lbf⋅ft |
Tighten the new screws evenly in several steps. |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 9.59 lbf⋅ft |
First stage | Tighten by hand |
Second stage | 33.19 lbf⋅ft |
Camshaft sensor | 6.64 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCTA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZA engines | 6.64 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
Downstream of catalytic converter | 44.25 lbf⋅ft |
Use hot screw paste | |
Upstream of catalytic converter | 33.19 lbf⋅ft |
Use hot screw paste |
With pressure sensor | 8.85 lbf⋅ft |
Without pressure sensor | 12.54 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCTA engines | 16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZA engines | 16.23 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAVD engines | 36.88 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 36.88 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CJAA engines | 38.35 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CNWA engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTKA engines | 36.88 lbf⋅ft |
All other modifications | 40.57 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 51.63 lbf⋅ft |
Use new screws. | |
Second stage | 180° |
First stage | 66.38 lbf⋅ft |
Use new screws. | |
Second stage | 45° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Property class 10.9 |
All Volkswagen gasoline straight-4 2.0 Liters CBFA engines | 29.5 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Volkswagen gasoline straight-4 2.0 Liters CCTA engines | 29.5 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Volkswagen gasoline straight-4 2.0 Liters CCZA engines | 29.5 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All other modifications | 16.96 lbf⋅ft |
Replace nuts. Use hot screw paste. |
Catalytic converter bracket | 16.23 lbf⋅ft |
Clamps | 5.16 lbf⋅ft |
Use new parts. | |
Retaining clamp | 18.44 lbf⋅ft |
Differential pressure sensor lines | 25.81 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAVD engines | 8.85 lbf⋅ft |
Replace the nuts and tighten alternately | |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 17.7 lbf⋅ft |
Replace nuts. |
First stage | 3.69 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
Second stage | 8.85 lbf⋅ft |
Third stage | 11.8 lbf⋅ft |
Fourth stage | 18.44 lbf⋅ft |
Lower nuts | 22.13 lbf⋅ft |
Replace nuts. Use hot screw paste. |
All Volkswagen gasoline straight-5 2.5 Liters CBTA engines | 16.96 lbf⋅ft |
Replace nuts. | |
All Volkswagen gasoline straight-5 2.5 Liters CBUA engines | 16.96 lbf⋅ft |
Replace nuts. |
First stage | 13.28 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
Second stage | 8.85 lbf⋅ft |
Tighten crosswise from inside to outside. | |
Third stage | 8.85 lbf⋅ft |
All Volkswagen gasoline straight-5 2.5 Liters CCCA engines | 16.96 lbf⋅ft |
Replace nuts. | |
All Volkswagen diesel straight-4 2.0 Liters CJAA engines | 16.96 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Volkswagen gasoline straight-4 1.4 Liters CNWA engines | 8.85 lbf⋅ft |
Replace the nuts and tighten alternately | |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 8.85 lbf⋅ft |
Replace the nuts and tighten alternately | |
All Volkswagen gasoline straight-4 1.4 Liters CTKA engines | 8.85 lbf⋅ft |
Replace the nuts and tighten alternately |
All other modifications | 11.06 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
All Volkswagen diesel straight-4 1.6 Liters CAYC engines | 7.38 lbf⋅ft |
All other modifications | 2.21 lbf⋅ft |
Fuel filter cover | 3.69 lbf⋅ft |
Preliminary feed pump | 81.13 lbf⋅ft |
Replace sealing rings. |
All other modifications | 18.44 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 55.32 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2011 Volkswagen Beetle A5 Convertible user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Beetle A5 Convertible service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2011 Volkswagen Beetle A5 Convertible you're not only saving money, but also also improving your technical skills and learning something new.