in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
expand_moreBleed valve
Vehicles produces on Japan facility (TMC) 5.9 lbf⋅ft
Vehicles produces on France facility (TMMF) 12.54 lbf⋅ft
Brake hose 22.13 lbf⋅ft
Brake line 11.06 lbf⋅ft
expand_moreFront axle brake caliper
Vehicles produces on Japan facility (TMC) 25.08 lbf⋅ft
Vehicles produces on France facility (TMMF) 20.65 lbf⋅ft
Front axle brake caliper mounting support 78.92 lbf⋅ft
Front axle brake disc 3.69 lbf⋅ft
Wheel speed sensor 6.64 lbf⋅ft
expand_moreFront axle steering
Lower steering column joint 20.65 lbf⋅ft
Steering gear 70.81 lbf⋅ft
Track rod end on stub axle 36.14 lbf⋅ft
Replace nuts.
Track rod end on track rod 55.32 lbf⋅ft
expand_moreFront axle suspension
Shock-absorber piston rod 24.34 lbf⋅ft
Replace nuts.
expand_moreSuspension strut
On chassis 40.57 lbf⋅ft
Replace nuts.
On stub axle 120.96 lbf⋅ft
Replace screws and nuts.
expand_moreWheel suspension
expand_moreFront axle drive shaft
Central nuts 159.31 lbf⋅ft
Replace nuts.
Stabiliser mounting at the stabiliser 54.58 lbf⋅ft
Stabiliser mounting at suspension strut 54.58 lbf⋅ft
Stabilizer mounting at the subframe 34.67 lbf⋅ft
Support joint at the stub axle 72.28 lbf⋅ft
Replace locking pins.
expand_moreTransverse control arm
Front 101.05 lbf⋅ft
expand_moreRear
expand_moreVehicles produces on France facility (TMMF)
Figure 1. Wheel suspension, Transverse control arm, Rear, Vehicles produces on France facility (TMMF).
Figure 1. Wheel suspension, Transverse control arm, Rear, Vehicles produces on France facility (TMMF).
Screws with head marking „I“ 99.57 lbf⋅ft
See figure 1.
Figure 2. Wheel suspension, Transverse control arm, Rear, Vehicles produces on France facility (TMMF).
Figure 2. Wheel suspension, Transverse control arm, Rear, Vehicles produces on France facility (TMMF).
Screws with head marking „II“ 118.01 lbf⋅ft
See figure 2.
expand_moreVehicles produces on Japan facility (TMC)
Figure 3. Wheel suspension, Transverse control arm, Rear, Vehicles produces on Japan facility (TMC).
Figure 3. Wheel suspension, Transverse control arm, Rear, Vehicles produces on Japan facility (TMC).
Screws with head marking „I“ 99.57 lbf⋅ft
See figure 3.
Figure 4. Wheel suspension, Transverse control arm, Rear, Vehicles produces on Japan facility (TMC).
Figure 4. Wheel suspension, Transverse control arm, Rear, Vehicles produces on Japan facility (TMC).
Screws with head marking „II“ 118.01 lbf⋅ft
See figure 4.
expand_moreWheel hub wheel bearing
Central nuts 159.31 lbf⋅ft
Replace nuts.
expand_moreWheels and tires
Wheel attachment 75.97 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2009 Toyota Yaris user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Yaris service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2009 Toyota Yaris you're not only saving money, but also also improving your technical skills and learning something new.

Toyota Yaris Second generation facelift model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat