2006 BMW X3 First generation Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Code range 11 mm | 8.85–11.8 lbf⋅ft |
Code range 7 mm | 2.58–3.69 lbf⋅ft |
Code range 9 mm | 5.16–8.11 lbf⋅ft |
At the brake caliper | 14.01 lbf⋅ft |
Brake line | 10.33 lbf⋅ft |
Front axle brake caliper | 22.13 lbf⋅ft |
Clean the components and do not grease. | |
Front axle brake caliper mounting support | 81.13 lbf⋅ft |
Replace screws. | |
Front axle brake disc | 11.8 lbf⋅ft |
Replace screws. | |
Wheel speed sensor | 5.9 lbf⋅ft |
Lower steering column joint | 20.65 lbf⋅ft |
Replace screws. | |
Steering gear | 73.76 lbf⋅ft |
Use new screws and nuts. | |
Track rod end on stub axle | 59 lbf⋅ft |
Replace nuts. | |
Track rod end on track rod | 37.62 lbf⋅ft |
Track rod on steering gear | 81.13 lbf⋅ft |
Suspension strut bearing pedestal | 25.08 lbf⋅ft |
Replace nuts. | |
Shock-absorber piston rod | 47.2 lbf⋅ft |
Replace nuts. |
On chassis | 25.08 lbf⋅ft |
Replace nuts. | |
On stub axle | 73.76 lbf⋅ft |
Use new screws and nuts. |
Central nuts | 309.78 lbf⋅ft |
Replace nuts. |
Stabiliser mounting at the stabiliser | 47.94 lbf⋅ft |
Stabiliser mounting at suspension strut | 47.94 lbf⋅ft |
Stabilizer mounting at the subframe | 41.3 lbf⋅ft |
Support joint at the stub axle | 44.25 lbf⋅ft |
Replace screws. | |
Support joint at the transverse control arm | 59 lbf⋅ft |
Replace nuts. |
First stage | 121.7 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 75–105° |
Wheel attachment | 95.88–110.63 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2006 BMW X3 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW X3 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2006 BMW X3 you're not only saving money, but also also improving your technical skills and learning something new.
2006 BMW X3 generations
In 2006 BMW offered 2 generations of the X3. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.