For 2006 X3 First generation BMW recommends to use: Texaco ETL 7045E automatic transmission fluids and genuine OEM automatic transmission fluids with following part numbers: 83 22 0 397 114, and 83 22 0 142 516. To select the right automatic transmission fluid see the table below.

How much automatic transmission fluid you need to put into 2006 X3 depends on conditions listed below.

in your garage to make future searches easy.

Condition Volume
expand_more2.5 i with gasoline straight-6 2.5 L 189 HP engine (2004.1–2006.8)
Amount to change 4.23 US qt.
Automatic transmission fluid: Texaco ETL 7045E
New filling 8.88 US qt.
Automatic transmission fluid: Texaco ETL 7045E
expand_more2.5 si with gasoline straight-6 2.5 L 215 HP engine (2006.9–2008.8)
GA6L45R gearbox 10.04 US qt.
Part number: 83 22 0 397 114
expand_more3.0 d with diesel straight-6 3.0 L 215 HP engine (2004.1–2008.8)
GA6HP26Z gearbox 10.04 US qt.
Part number: 83 22 0 142 516
expand_more3.0 i xDrive with gasoline straight-6 3.0 L 228 HP engine (2004.1–2006.8)
GA5R390R gearbox 9.51 US qt.
Part number: 83 22 0 142 516
expand_more3.0 sd with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2006.9–2008.8)
GA6HP26Z gearbox 10.04 US qt.
Part number: 83 22 0 142 516
expand_moreAll other modifications
expand_moreGA6HP19Z gearbox
New filling 10.04 US qt.
Part number: 83 22 0 142 516

Without special equipment it is possible to replace only ATF in the AT pan because of the way automatic transmission in 2006 BMW X3 has been designed. It will take about 3090 minutes depends on your skill level and might save you up to $200 depends on the region you live in.

With a spanner or a retched with the right size head unscrew the refill plug and the drain plug. After that drain old AT fluid. If you want to replace the filter you need to remove the ATF pan, replace the filter and then install the ATF pan back with a new gasket. Screw back the drain plug with a new gasket and refill the transmission with new ATF.

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2006 BMW X3 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW X3 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2006 BMW X3 you're not only saving money, but also also improving your technical skills and learning something new.

2006 BMW X3 generations

In 2006 BMW offered 2 generations of the X3. Automatic transmission fluid capacity may vary in different generations. Be sure that you are looking at the rigt modification.

BMW X3 First generation model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat