in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
expand_moreBleed valve
Code range 7 mm 3.69 lbf⋅ft
Code range 9 mm 4.43 lbf⋅ft
expand_moreBrake hose
M10 14.01 lbf⋅ft
M12 12.54 lbf⋅ft
expand_moreFront axle brake caliper
Hexagon head screws 25.81 lbf⋅ft
Use new screws.
Hexagon head screws 22.13 lbf⋅ft
Clean the components and do not grease.
expand_moreFront axle brake caliper mounting support
With aluminium brake caliper 90.72 lbf⋅ft
Otherwise 81.13 lbf⋅ft
Front axle brake disc 11.8 lbf⋅ft
Wheel speed sensor 5.9 lbf⋅ft
expand_moreFront axle steering
expand_moreTrack rod end on stub axle
325 i X with gasoline straight-6 2.5 L 168 HP engine (1986.12–1991.8) 36.88 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 168 HP engine (1986.12–1991.8) 36.88 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 168 HP engine (1986.12–1991.8) 36.88 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 168 HP engine (1986.12–1991.8) 36.88 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 169 HP engine (1986.3–1987.12) 36.88 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 169 HP engine (1986.3–1987.12) 36.88 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 169 HP engine (1986.3–1987.12) 36.88 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 169 HP engine (1986.3–1987.12) 36.88 lbf⋅ft
All other modifications 27.29 lbf⋅ft
expand_moreTrack rod end on track rod
325 i X with gasoline straight-6 2.5 L 168 HP engine (1986.12–1991.8) 33.19 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 168 HP engine (1986.12–1991.8) 33.19 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 168 HP engine (1986.12–1991.8) 33.19 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 168 HP engine (1986.12–1991.8) 33.19 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 169 HP engine (1986.3–1987.12) 33.19 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 169 HP engine (1986.3–1987.12) 33.19 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 169 HP engine (1986.3–1987.12) 33.19 lbf⋅ft
325 i X with gasoline straight-6 2.5 L 169 HP engine (1986.3–1987.12) 33.19 lbf⋅ft
All other modifications 10.33 lbf⋅ft
expand_moreWheel suspension
expand_moreFront axle drive shaft
expand_more325 i X with gasoline straight-6 2.5 L 169 HP engine (1986.3–1987.12)
Central nuts 184.39 lbf⋅ft
expand_moreAll other modifications
Central nuts 184.39 lbf⋅ft
Replace nuts.
expand_moreWheel hub wheel bearing
Central nuts 213.89 lbf⋅ft
expand_moreWheels and tires
Wheel attachment 81.1395.88 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1987 BMW 3 Series Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW 3 Series Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 1987 BMW 3 Series Sedan you're not only saving money, but also also improving your technical skills and learning something new.

1987 BMW 3 Series Sedan generations

In 1987 BMW offered 2 generations of the 3 Series Sedan. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

BMW 3 Series Sedan Second generation LCI model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat