2007 Audi TT engine fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAir intake system

expand_moreIntake manifold

expand_moreAll other modifications


Engine with belt control	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Engine with chain drive	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAuxiliary assemblies

expand_moreAuxiliary drive belt tensioner

expand_moreAll other modifications


Engine with belt control	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Engine with chain drive	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


Air-conditioning compressor	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAir-conditioning compressor bracket

expand_moreAll other modifications


Engine with belt control	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreEngine with chain drive


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	90°90°90°


Air-conditioning compressor pressure line	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Alternator	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreGenerator bracket

expand_moreAll other modifications


Engine with belt control	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreEngine with chain drive


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	90°90°90°

expand_moreVacuum pump

expand_moreAll other modifications


Engine with chain drive	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCarburetion

expand_moreHigh-pressure pump

expand_moreAll other modifications

expand_moreHigh-pressure pump


Engine with belt control	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreHigh-pressure pump (M6)


Engine with chain drive	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.

expand_moreHigh-pressure pump (M8)


Engine with chain drive	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_moreCharging


Charge air pipes	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCooling system

expand_moreCoolant pump

expand_moreAll other modifications


Engine with belt control	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Engine with chain drive	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


Radiator mounting	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreCylinder head

expand_moreCamshaft bearing

expand_moreAll Audi gasoline straight-4 2.0 L BWA engines

expand_moreBearing casing

expand_moreEngine with belt control


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreCylinder head screws

expand_moreAll other modifications

expand_moreEngine with belt control

Figure 1. Cylinder head, Cylinder head screws, All other modifications, Engine with belt control.


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 1.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreEngine with chain drive screws 1 – 10

Figure 2. Cylinder head, Cylinder head screws, All other modifications, Engine with chain drive screws 1 – 10.


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 2.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreEngine with chain drive screws 11 – 14

expand_moreFourth stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreVariable valve control for engine with chain drive (screws 1 – 10)

Figure 3. Cylinder head, Cylinder head screws, All other modifications, Variable valve control for engine with chain drive (screws 1 – 10).


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 3.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreVariable valve control for engine with chain drive (screw 11)

expand_moreFourth stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreValve cover

expand_moreAll other modifications

expand_moreBearing cap at the cylinder head

expand_moreEngine with chain drive


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°


Engine with belt control	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreEngine block

expand_moreBalance shaft gear wheel

expand_moreAll other modifications

expand_moreCoolant pump

expand_moreEngine with chain drive


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°

expand_moreOn the engine block


Engine with chain drive	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreConnecting rod bearing

expand_moreAll other modifications

expand_moreEngine with belt control


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine with chain drive (M8)

expand_moreScrews


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine with chain drive (M9)

expand_moreScrews


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreCrankshaft central screws

expand_moreAll Audi gasoline straight-4 2.0 L BWA engines

expand_moreEngine with belt control


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine with chain drive


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreFlywheel


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.
Second stage	90°90°90°


Flywheel cover	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreMain bearing

expand_moreAll other modifications

expand_moreEngine with chain drive, center

expand_moreScrews


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine with belt control


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine with chain drive

expand_moreLateral-fitting screw


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreVibration damper

expand_moreAll Audi gasoline straight-4 2.0 L BWA engines

expand_moreBWA engine (class 10.9)


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine control


Balance shaft timing chain tension rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreBottom part of the control unit housing

expand_moreAll other modifications

expand_moreEngine with chain drive


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreCamshaft adjuster

expand_moreAll other modifications

expand_moreBearing casing


Engine with chain drive	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreEngine with belt control


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreEngine with chain drive


Cap	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreCamshaft drive belt deflection pulley

expand_moreEngine with belt control


Bottom	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Top	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


Camshaft timing chain slip rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing chain tensioner

expand_moreAll other modifications


Engine with belt control	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Engine with chain drive	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


Camshaft timing chain tensioning rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing gear

expand_moreEngine with belt control


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreDrive chain balance shaft tensioner

expand_moreAll other modifications


Engine with chain drive	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreIntermediate shaft chain sprocket

expand_moreAll other modifications

expand_moreEngine with chain drive


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace the screws and sprocket wheel.
Second stage	for freedom from play

expand_moreThird stage


First step	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second step	90°90°90°

expand_moreOil pump drive chain tensioner

expand_moreAll other modifications


Engine with belt control	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Engine with chain drive	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreOutlet camshaft wheel

expand_moreAll Audi gasoline straight-4 2.0 L BWA engines

expand_moreEngine with chain drive (M6)

expand_moreScrews


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine with chain drive (M8)

expand_moreScrews


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreToothed belt guard

expand_moreAll other modifications

expand_moreCoolant pump


Engine with chain drive	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


Engine with belt control	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreToothed belt tensioning roller


Engine with belt control	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreTop part of control unit housing

expand_moreAll other modifications


Engine with belt control	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Engine with chain drive	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreEngine lubrication

expand_moreOil cooler


All other modifications	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m


Oil drain plug	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.

expand_moreOil filter housing


Cap	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Locking screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Otherwise	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreOil pump chain wheel


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil sump

expand_moreAll other modifications

expand_moreAt the gearbox


Engine with belt control	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreEngine with chain drive

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreOil sump top part


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOn the engine block


Engine with belt control	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreEngine management

expand_moreCamshaft sensor


All other modifications	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


Charge air pressure sensor	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Knock sensor	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Lambda sensor	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Use hot screw paste

expand_moreEngine mounting

expand_moreEngine bracket

expand_moreAll other modifications


On the engine block	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreEngine mounting

expand_moreAll other modifications

expand_moreOn chassis


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOn engine bracket


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSubframe

expand_moreOn chassis


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreTorque arm

expand_moreAll other modifications

expand_moreAt the subframe


First stage	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAt the gearbox


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreExhaust system

expand_moreExhaust manifold

expand_moreAll other modifications

expand_moreNuts


Bottom	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace nuts.
Top	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace nuts.


Exhaust pipe	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace nuts.
Exhaust pipe bracket	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreFuel supply


Fuel filter bracket	1.11 lbf⋅ft1.11 lbf⋅ft1.5 N⋅m

expand_moreIgnition system


Spark plugs	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreStart system

expand_moreStarter

expand_moreAll Audi gasoline straight-4 2.0 L BWA engines


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M12	59 lbf⋅ft59 lbf⋅ft80 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2007 Audi TT user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi TT service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2007 Audi TT you're not only saving money, but also also improving your technical skills and learning something new.

2007 Audi TT Second generation Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Audi TT Second generation model years

Suggest edit