in your garage to make future searches easy.

Condition Value
expand_moreAir intake system
expand_moreInduction-pipe flap control unit
All Audi diesel V6 3.0 L BUG engines 6.64 lbf⋅ft
All Audi diesel V6 3.0 L BUN engines 6.64 lbf⋅ft
All Audi diesel V6 3.0 L CASB engines 6.64 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 6.64 lbf⋅ft
All other modifications 1.84 lbf⋅ft
expand_moreIntake manifold
First stage 22.13 lbf⋅ft
from inside to outside
Second stage 90°
Use new screws
First stage Tighten by hand
Tighten the screws cross-wise from inside to outside.
Second stage 7.38 lbf⋅ft
Tighten the screws in steps.
All other modifications 6.64 lbf⋅ft
Tighten new screws crosswise in inside-to-outside order.
expand_moreAuxiliary assemblies
expand_moreAuxiliary drive belt deflection pulley
All Audi diesel V8 4.1 L BTR engines 18.44 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 16.23 lbf⋅ft
All other modifications 16.96 lbf⋅ft
expand_moreAuxiliary drive belt tensioner
expand_moreM10
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreM11
First stage 44.25 lbf⋅ft
Replace screws.
Second stage 90°
M8 16.96 lbf⋅ft
expand_moreM10
Tensioning lever 29.5 lbf⋅ft
M8 18.44 lbf⋅ft
expand_moreM10
Tensioning lever 29.5 lbf⋅ft
M8 18.44 lbf⋅ft
Audi gasoline V6 3.6 L BHK 276 HP at 6200 RPM, 360 N⋅m at 2500 RPM 18.44 lbf⋅ft
Audi diesel V8 4.1 L BTR 322 HP at 3750 RPM, 650 N⋅m at 1600 RPM 36.88 lbf⋅ft
Audi gasoline V8 4.2 L BAR 345 HP 16.23 lbf⋅ft
M10 40.57 lbf⋅ft
M8 22.13 lbf⋅ft
All other modifications 29.5 lbf⋅ft
Air-conditioning compressor 18.44 lbf⋅ft
expand_moreAir-conditioning compressor bracket
expand_moreAll Audi gasoline V6 3.6 L BHK engines
First stage Tighten bolt(s) until hand-tight.
Second stage 18.44 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 16.23 lbf⋅ft
All other modifications 29.5 lbf⋅ft
Air-conditioning compressor pressure line 14.7518.44 lbf⋅ft
Alternator 16.96 lbf⋅ft
expand_moreGenerator bracket
expand_moreAll Audi gasoline V6 3.6 L BHK engines
First stage Tighten bolt(s) until hand-tight.
Second stage 18.44 lbf⋅ft
All other modifications 29.5 lbf⋅ft
expand_moreHydraulic lines at the servo-steering pump
expand_moreAll Audi diesel V8 4.1 L BTR engines
High-pressure side 25.81 lbf⋅ft
Replace sealing rings
Low-pressure side 6.64 lbf⋅ft
All other modifications 25.81 lbf⋅ft
expand_moreServo pump pulley
All Audi diesel V6 3.0 L BUG engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CASA engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CCMA engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CJGA engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CNRB engines 16.23 lbf⋅ft
All other modifications 18.44 lbf⋅ft
expand_moreServo steering pump
expand_moreAll Audi diesel V8 4.1 L BTR engines
M10 62.69 lbf⋅ft
M8 16.23 lbf⋅ft
All Audi diesel V6 3.0 L BUG engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CASA engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CCMA engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CJGA engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CNRB engines 16.23 lbf⋅ft
All other modifications 18.44 lbf⋅ft
Vacuum pump 6.64 lbf⋅ft
expand_moreCarburetion
expand_moreExhaust gas return cooler
expand_moreAll Audi diesel V12 5.9 L CCGA engines
First stage Screw in screw manually up to stop.
Second stage 3.69 lbf⋅ft
Third stage 90°
All other modifications 6.64 lbf⋅ft
Exhaust gas return valve 6.64 lbf⋅ft
expand_moreExhaust recirculation pipe
expand_moreAll Audi diesel V8 4.1 L BTR engines
First stage 5.9 lbf⋅ft
Second stage 90°
All other modifications 6.64 lbf⋅ft
expand_moreFuel-distributing pipe
expand_moreAll Audi gasoline V6 3.6 L BHK engines
First stage 22.13 lbf⋅ft
Tighten new screws in inside-to-outside order.
Second stage 90°
All Audi diesel V8 4.1 L BTR engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L BUG engines 16.96 lbf⋅ft
All Audi diesel V6 3.0 L BUN engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CASA engines 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CASB engines 16.23 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CCMA engines 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CJGA engines 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CNRB engines 16.96 lbf⋅ft
All other modifications 1.84 lbf⋅ft
Replace screws.
expand_moreHigh-pressure line
expand_moreAll Audi gasoline V6 3.6 L BHK engines
First stage Tighten by hand
Second stage 16.23 lbf⋅ft
All other modifications 18.44 lbf⋅ft
Oil thread.
expand_moreHigh-pressure pump
All Audi gasoline V6 3.6 L BHK engines 7.38 lbf⋅ft
Replace screws.
expand_moreAll Audi diesel V6 3.0 L BUG engines
M6 6.64 lbf⋅ft
M8 16.96 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L BUN engines
M6 6.64 lbf⋅ft
M8 16.96 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CASA engines
M6 6.64 lbf⋅ft
M8 16.96 lbf⋅ft
All other modifications 16.23 lbf⋅ft
expand_moreHigh-pressure pump drive wheel
All Audi diesel V8 4.1 L BTR engines 51.63 lbf⋅ft
Replace nuts.
expand_moreAll Audi diesel V6 3.0 L BUN engines
BUN engine 55.32 lbf⋅ft
CASB engine 55.32 lbf⋅ft
expand_moreAll other modifications
expand_moreCASA engine
CCMA engine 55.32 lbf⋅ft
expand_moreHigh-pressure pump pulley
expand_moreAll Audi diesel V12 5.9 L CCGA engines
Centering screws 17.7 lbf⋅ft
Central nuts 44.25 lbf⋅ft
Replace nuts.
All other modifications 51.63 lbf⋅ft
Injection hoses 18.44 lbf⋅ft
expand_moreInjection nozzle (injector)
expand_moreAll Audi diesel V6 3.0 L BUG engines
Nuts 6.64 lbf⋅ft
Screws 3.69 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L BUN engines
Nuts 7.38 lbf⋅ft
Screws 3.69 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 6.64 lbf⋅ft
Replace nuts.
All other modifications 7.38 lbf⋅ft
expand_morePressure tube connection
3.6 FSI with gasoline V6 3.6 L 276 HP at 6200 RPM, 360 N⋅m at 2500 RPM engine (2006.8–2010.5) 29.5 lbf⋅ft
expand_moreCharging
expand_moreCharge air pipes
All Audi diesel V6 3.0 L BUG engines 4.06 lbf⋅ft
All Audi diesel V6 3.0 L CASA engines 4.06 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 6.64 lbf⋅ft
All Audi diesel V6 3.0 L CCMA engines 4.06 lbf⋅ft
All Audi diesel V6 3.0 L CJGA engines 4.06 lbf⋅ft
All Audi diesel V6 3.0 L CNRB engines 4.06 lbf⋅ft
expand_moreAll other modifications
First stage Screw in manually up to stop.
Second stage 7.38 lbf⋅ft
Charge air compressor 14.75 lbf⋅ft
Replace nuts.
Pulley for charge-air compressor 19.91 lbf⋅ft
expand_moreTurbo charger
expand_moreAll Audi diesel V8 4.1 L BTR engines
First stage 14.75 lbf⋅ft
Replace nuts. Use hot screw paste.
Second stage 90°
expand_moreAll Audi diesel V12 5.9 L CCGA engines
First stage Screw in manually up to stop.
Replace screws.
Second stage 14.75 lbf⋅ft
expand_moreAll other modifications
First stage 22.13 lbf⋅ft
Replace screws. Use hot screw paste.
Second stage 90°
expand_moreTurbocharger bracket
expand_moreAll Audi diesel V12 5.9 L CCGA engines
First stage Screw in new screw(s) manually as
far as it goes.
Replace screws.
Second stage 7.38 lbf⋅ft
Third stage 16.23 lbf⋅ft
All other modifications 18.44 lbf⋅ft
expand_moreTurbocharger coolant feed line
All Audi diesel V8 4.1 L BTR engines 22.13 lbf⋅ft
Replace sealing rings.
expand_moreAll Audi diesel V12 5.9 L CCGA engines
Union nuts 22.13 lbf⋅ft
expand_moreTurbocharger coolant return line
All Audi diesel V8 4.1 L BTR engines 18.44 lbf⋅ft
expand_moreAll Audi diesel V12 5.9 L CCGA engines
Banjo screws 22.13 lbf⋅ft
expand_moreTurbocharger oil feed line
All Audi diesel V8 4.1 L BTR engines 11.06 lbf⋅ft
Replace sealing rings.
expand_moreAll Audi diesel V6 3.0 L BUG engines
At the turbocharger 11.06 lbf⋅ft
Replace sealing rings.
On the engine block 6.64 lbf⋅ft
Replace sealing rings.
expand_moreAll Audi diesel V6 3.0 L BUN engines
At the turbocharger 11.06 lbf⋅ft
Replace sealing rings.
On the engine block 6.64 lbf⋅ft
Replace sealing rings.
expand_moreAll Audi diesel V12 5.9 L CCGA engines
At the turbocharger 11.06 lbf⋅ft
Replace sealing rings.
expand_moreAll other modifications
At the turbocharger 11.06 lbf⋅ft
Otherwise 6.64 lbf⋅ft
expand_moreTurbocharger oil return line
At the turbocharger 6.64 lbf⋅ft
Use hot screw paste
expand_moreCooling system
expand_moreCoolant pump
All Audi diesel V12 5.9 L CCGA engines 16.23 lbf⋅ft
Gradually tighten screws crosswise.
All other modifications 6.64 lbf⋅ft
Gradually tighten screws crosswise.
expand_moreCoolant pump pulley
All Audi diesel V6 3.0 L BUG engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L BUN engines 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CASA engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CASB engines 16.96 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CCMA engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CJGA engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CNRB engines 16.23 lbf⋅ft
All other modifications 14.75 lbf⋅ft
expand_moreCoolant thermostat housing
All Audi gasoline V6 3.6 L BHK engines 3.69 lbf⋅ft
All other modifications 6.64 lbf⋅ft
Replace sealing rings.
expand_moreFan wheel
All Audi gasoline V6 3.6 L BHK engines 7.38 lbf⋅ft
All Audi diesel V8 4.1 L BTR engines 7.38 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 7.38 lbf⋅ft
All other modifications 2.95 lbf⋅ft
expand_moreRadiator mounting
All Audi gasoline V6 3.6 L BHK engines 5.9 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 4.43 lbf⋅ft
All other modifications 3.69 lbf⋅ft
expand_moreCylinder head
expand_moreCamshaft bearing
expand_moreAll Audi gasoline V6 3.6 L BHK engines
First stage 3.69 lbf⋅ft
Tighten gradually and alternately from inside to outside.
Second stage 45°
expand_moreAll Audi diesel V8 4.1 L BTR engines
Figure 1. Cylinder head, Camshaft bearing, Audi diesel V8 4.1 L BTR.
Figure 1. Cylinder head, Camshaft bearing, Audi diesel V8 4.1 L BTR.
First stage Screw in screw manually up to stop.
See figure 1.
Second stage 7.38 lbf⋅ft
All Audi diesel V6 3.0 L BUG engines 6.64 lbf⋅ft
Tighten the screws evenly from inside to outside in several steps.
expand_moreAll Audi diesel V6 3.0 L BUN engines
Figure 2. Cylinder head, Camshaft bearing, Audi diesel V6 3.0 L BUN.
Figure 2. Cylinder head, Camshaft bearing, Audi diesel V6 3.0 L BUN.
First stage Screw in screw(s) by hand.
Note correct order of tensioning. See figure 2.
Second stage 6.64 lbf⋅ft
All Audi diesel V6 3.0 L CASA engines 6.64 lbf⋅ft
Tighten the screws evenly from inside to outside in several steps.
expand_moreAll Audi diesel V12 5.9 L CCGA engines
expand_moreScrews 1 – 14
Figure 3. Cylinder head, Camshaft bearing, Audi diesel V12 5.9 L CCGA, Screws 1 – 14.
Figure 3. Cylinder head, Camshaft bearing, Audi diesel V12 5.9 L CCGA, Screws 1 – 14.
First stage Screw in screw manually up to stop.
Use new screws. See figure 3.
Second stage 5.9 lbf⋅ft
Third stage 16.23 lbf⋅ft
expand_moreScrews 15 – 26
Fourth stage 7.38 lbf⋅ft
All Audi diesel V6 3.0 L CCMA engines 6.64 lbf⋅ft
Tighten the screws evenly from inside to outside in several steps.
All Audi diesel V6 3.0 L CJGA engines 6.64 lbf⋅ft
Tighten the screws evenly from inside to outside in several steps.
All Audi diesel V6 3.0 L CNRB engines 6.64 lbf⋅ft
Tighten the screws evenly from inside to outside in several steps.
expand_moreAll other modifications
Figure 4. Cylinder head, Camshaft bearing, All other modifications.
Figure 4. Cylinder head, Camshaft bearing, All other modifications.
First stage Screw in screw manually up to stop.
See figure 4.
Second stage 5.9 lbf⋅ft
Third stage 90°
expand_moreCylinder head screws
Figure 5. Cylinder head, Cylinder head screws, Audi diesel V6 3.0 L BUN 208 HP.
Figure 5. Cylinder head, Cylinder head screws, Audi diesel V6 3.0 L BUN 208 HP.
First stage 25.81 lbf⋅ft
Use new screws. See figure 5.
Second stage 44.25 lbf⋅ft
Third stage 90°
Fourth stage 90°
First stage 25.81 lbf⋅ft
Use new screws. See figure 5.
Second stage 44.25 lbf⋅ft
Third stage 90°
Fourth stage 90°
Figure 6. Cylinder head, Cylinder head screws, Audi gasoline V6 3.6 L BHK 276 HP at 6200 RPM, 360 N⋅m at 2500 RPM.
Figure 6. Cylinder head, Cylinder head screws, Audi gasoline V6 3.6 L BHK 276 HP at 6200 RPM, 360 N⋅m at 2500 RPM.
First stage 22.13 lbf⋅ft
Use new screws. See figure 6.
Second stage 36.88 lbf⋅ft
Third stage 90°
Fourth stage 90°
First stage 22.13 lbf⋅ft
Use new screws. See figure 6.
Second stage 44.25 lbf⋅ft
Third stage 90°
Fourth stage 90°
Figure 7. Cylinder head, Cylinder head screws, Audi diesel V12 5.9 L CCGA 493 HP at 3750 RPM, 1000 N⋅m at 1750 RPM.
Figure 7. Cylinder head, Cylinder head screws, Audi diesel V12 5.9 L CCGA 493 HP at 3750 RPM, 1000 N⋅m at 1750 RPM.
First stage Screw in screw(s) by hand.
Replace screws. See figure 7.
Second stage 25.81 lbf⋅ft
Third stage 44.25 lbf⋅ft
Fourth stage 90°
Fifth stage 90°
expand_moreScrew 15
Sixth stage 16.23 lbf⋅ft
expand_moreAll other modifications
Figure 8. Cylinder head, Cylinder head screws, All other modifications.
Figure 8. Cylinder head, Cylinder head screws, All other modifications.
First stage 25.81 lbf⋅ft
Replace screws. See figure 8.
Second stage 44.25 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_moreValve cover
Audi gasoline V6 3.6 L BHK 276 HP at 6200 RPM, 360 N⋅m at 2500 RPM 7.38 lbf⋅ft
from inside to outside
First stage 5.9 lbf⋅ft
Tighten screws crosswise.
Second stage 90°
First stage 5.9 lbf⋅ft
Tighten the screws cross-wise from inside to outside.
Second stage 90°
All other modifications 6.64 lbf⋅ft
Tighten the screws cross-wise from inside to outside.
expand_moreEngine block
expand_moreBalance shaft gear wheel
All Audi diesel V6 3.0 L BUG engines 16.96 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L BUN engines
Central screws 44.25 lbf⋅ft
Wheel 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CASA engines 16.96 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 44.25 lbf⋅ft
All Audi diesel V6 3.0 L CCMA engines 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CJGA engines 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CNRB engines 16.96 lbf⋅ft
expand_moreAll other modifications
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
Central screws 44.25 lbf⋅ft
expand_moreConnecting rod bearing
First stage 22.13 lbf⋅ft
Replace and lightly oil the screws.
Second stage 90°
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
First stage 25.81 lbf⋅ft
Replace screws.
Second stage 90°
First stage 44.25 lbf⋅ft
Use new screws.
Second stage 90°
First stage 25.81 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCrankcase ventilation
All Audi diesel V8 4.1 L BTR engines 4.43 lbf⋅ft
All other modifications 6.64 lbf⋅ft
expand_moreCrankshaft central screws
expand_moreAll Audi gasoline V6 3.6 L BHK engines
First stage 73.76 lbf⋅ft
Use new screw.
Second stage 180°
All Audi diesel V12 5.9 L CCGA engines 199.14 lbf⋅ft
Use screw-locking compound.
expand_moreCrankshaft pulley
expand_more4.2 FSI with gasoline V8 4.2 L 345 HP engine (2006.3–2010.5)
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 16.23 lbf⋅ft
Third stage 90°
expand_moreDrive plate
expand_moreAll Audi diesel V8 4.1 L BTR engines
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L BUN engines
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CASA engines
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 44.25 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreEngine block closure screws
All Audi diesel V8 4.1 L BTR engines 25.81 lbf⋅ft
TDC marking.
All Audi diesel V12 5.9 L CCGA engines 25.81 lbf⋅ft
All other modifications 10.33 lbf⋅ft
Replace sealing rings.
expand_moreFlywheel
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
First stage 22.13 lbf⋅ft
Use new screws.
Second stage 90°
First stage 44.25 lbf⋅ft
Use new screws.
Second stage 90°
expand_moreAll other modifications
First stage 44.25 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreMain bearing
expand_moreAll Audi gasoline V6 3.6 L BHK engines
First stage 22.13 lbf⋅ft
Use new screws.
Second stage 180°
expand_moreAll Audi diesel V8 4.1 L BTR engines
Figure 9. Engine block, Main bearing, Audi diesel V8 4.1 L BTR.
Figure 9. Engine block, Main bearing, Audi diesel V8 4.1 L BTR.
First stage 22.13 lbf⋅ft
See figure 9.
Second stage 36.88 lbf⋅ft
Third stage 90°
expand_moreAll Audi diesel V6 3.0 L BUG engines
Figure 10. Engine block, Main bearing, Audi diesel V6 3.0 L BUG.
Figure 10. Engine block, Main bearing, Audi diesel V6 3.0 L BUG.
First stage 22.13 lbf⋅ft
first tighten crosswise inside, then outside See figure 10.
Second stage 36.88 lbf⋅ft
Replace screws.
Third stage 90°
expand_moreAll Audi diesel V6 3.0 L CASA engines
First stage 22.13 lbf⋅ft
first tighten crosswise inside, then outside See figure 10.
Second stage 36.88 lbf⋅ft
Replace screws.
Third stage 90°
expand_moreAll Audi diesel V12 5.9 L CCGA engines
Figure 11. Engine block, Main bearing, Audi diesel V12 5.9 L CCGA.
Figure 11. Engine block, Main bearing, Audi diesel V12 5.9 L CCGA.
First stage 22.13 lbf⋅ft
Replace screws. See figure 11.
Second stage 36.88 lbf⋅ft
Third stage 90°
expand_moreAll other modifications
expand_moreScrews 1 – 16
Figure 12. Engine block, Main bearing, All other modifications, Screws 1 – 16.
Figure 12. Engine block, Main bearing, All other modifications, Screws 1 – 16.
First stage 36.88 lbf⋅ft
Replace screws. See figure 12.
Second stage 90°
expand_moreScrews 17 – 31
Third stage 14.75 lbf⋅ft
Use new screws. See figure 12.
Fourth stage 90°
expand_moreVibration damper
First stage 14.75 lbf⋅ft
use only property class 10.9
Second stage 90°
Replace screws.
First stage 22.13 lbf⋅ft
Tighten the screws crosswise.
Second stage 45°
First stage 16.23 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreAll other modifications
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreEngine control
expand_moreBalance shaft timing chain tension rail
expand_more6.0 TDI with diesel V12 5.9 L 493 HP at 3750 RPM, 1000 N⋅m at 1750 RPM engine (2008.9–2014.5)
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreBottom part of the control unit housing
M6 6.64 lbf⋅ft
M8 16.96 lbf⋅ft
M6 6.64 lbf⋅ft
M8 16.23 lbf⋅ft
expand_moreM6
First stage 3.69 lbf⋅ft
Second stage 6.64 lbf⋅ft
M8 16.96 lbf⋅ft
M6 6.64 lbf⋅ft
M8 16.23 lbf⋅ft
expand_moreM6
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
M8 16.23 lbf⋅ft
expand_moreAll other modifications
expand_moreScrew 11
Figure 13. Engine control, Bottom part of the control unit housing, All other modifications, Screw 11.
Figure 13. Engine control, Bottom part of the control unit housing, All other modifications, Screw 11.
First stage 2.21 lbf⋅ft
See figure 13.
Fourth stage 6.64 lbf⋅ft
expand_moreScrews 1 – 10
Second stage 2.21 lbf⋅ft
expand_moreScrews 1, 2, 4, 5, and 7
Third stage 90°
expand_moreScrews 7, 8, 9, and 10
Fifth stage 90°
expand_moreScrew 3
Sixth stage 11.8 lbf⋅ft
expand_moreScrew 6
Seventh stage 14.75 lbf⋅ft
Eighth stage 180°
expand_moreCamshaft adjuster
First stage 59 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCamshaft drive belt deflection pulley
High pressure pump belt 16.96 lbf⋅ft
expand_moreCamshaft timing chain slip rail
expand_moreAll Audi gasoline V6 3.6 L BHK engines
Screws 16.96 lbf⋅ft
Threaded screws 7.38 lbf⋅ft
expand_moreAll Audi diesel V12 5.9 L CCGA engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
Bearing bush 18.44 lbf⋅ft
expand_moreAll other modifications
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCamshaft timing chain tensioner
Audi gasoline V6 3.6 L BHK 276 HP at 6200 RPM, 360 N⋅m at 2500 RPM 29.5 lbf⋅ft
expand_moreAll other modifications
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreCamshaft timing chain tensioning rail
expand_moreAll Audi diesel V6 3.0 L BUN engines
expand_moreCASB engine
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCamshaft timing gear
Sprocket wheel 16.96 lbf⋅ft
High pressure pump belt 55.32 lbf⋅ft
expand_moreCentral screws
Auxiliary drive belt side 55.32 lbf⋅ft
Sprocket wheel 16.96 lbf⋅ft
First stage 44.25 lbf⋅ft
Replace screws.
Second stage 90°
Audi diesel V8 4.1 L BTR 322 HP at 3750 RPM, 650 N⋅m at 1600 RPM 17.7 lbf⋅ft
First stage 44.25 lbf⋅ft
Replace screws.
Second stage 59 lbf⋅ft
Third stage 90°
Audi diesel V12 5.9 L CCGA 493 HP at 3750 RPM, 1000 N⋅m at 1750 RPM 17.7 lbf⋅ft
All other modifications 16.96 lbf⋅ft
expand_moreChain tensioner
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
Audi gasoline V6 3.6 L BHK 276 HP at 6200 RPM, 360 N⋅m at 2500 RPM 29.5 lbf⋅ft
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreControl drive chain tensioner
Audi gasoline V6 3.6 L BHK 276 HP at 6200 RPM, 360 N⋅m at 2500 RPM 5.9 lbf⋅ft
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
All other modifications 8.85 lbf⋅ft
expand_moreControl drive chain tensioning rail
expand_moreAll Audi diesel V8 4.1 L BTR engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
All Audi diesel V6 3.0 L BUN engines 8.85 lbf⋅ft
All Audi diesel V6 3.0 L CASB engines 8.85 lbf⋅ft
expand_moreAll Audi diesel V12 5.9 L CCGA engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreControl drive sprocket wheel
expand_moreBUN engine
Bearing pedestal 6.64 lbf⋅ft
expand_moreCASB engine
expand_moreBearing pedestal
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreM10
Central screws 33.19 lbf⋅ft
expand_moreM6
expand_moreCentral screws
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
Left 33.19 lbf⋅ft
expand_moreRight
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
Left 33.19 lbf⋅ft
expand_moreRight
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
First stage 44.25 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreLeft
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreRight
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 45°
Left 30.98 lbf⋅ft
Right 16.23 lbf⋅ft
expand_moreAll other modifications
expand_moreAt the bearing pedestal
expand_moreScrews
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 60°
expand_moreBearing pedestal
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreCentral screws
First stage 22.13 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreControl drive timing chain slip rail
expand_moreRight
Bottom 6.64 lbf⋅ft
expand_moreTop
Right 8.85 lbf⋅ft
Otherwise 8.85 lbf⋅ft
expand_moreRight
Bottom 6.64 lbf⋅ft
expand_moreTop
Right 8.85 lbf⋅ft
Otherwise 8.85 lbf⋅ft
expand_moreRight
Bottom 8.85 lbf⋅ft
expand_moreTop
First stage 3.69 lbf⋅ft
Second stage 90°
expand_moreTop on the right side
First stage 3.69 lbf⋅ft
Second stage 90°
Audi gasoline V6 3.6 L BHK 276 HP at 6200 RPM, 360 N⋅m at 2500 RPM 7.38 lbf⋅ft
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreDrive chain balance shaft tensioner
expand_moreAll Audi diesel V12 5.9 L CCGA engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 6.64 lbf⋅ft
Inlet camshaft wheel 16.96 lbf⋅ft
expand_moreOil pump drive chain tensioner
Audi diesel V6 3.0 L CASB 208 HP 6.64 lbf⋅ft
Audi diesel V6 3.0 L BUN 208 HP 6.64 lbf⋅ft
Audi diesel V6 3.0 L BUG 229 HP at 4000 RPM, 500 N⋅m at 1750 RPM 6.64 lbf⋅ft
Audi diesel V6 3.0 L CCMA 236 HP at 4000 RPM, 550 N⋅m at 2000 RPM 6.64 lbf⋅ft
Audi diesel V6 3.0 L CJGA 236 HP at 4000 RPM, 550 N⋅m at 2000 RPM 6.64 lbf⋅ft
Audi diesel V6 3.0 L CNRB 236 HP at 4000 RPM, 550 N⋅m at 2000 RPM 6.64 lbf⋅ft
Audi diesel V6 3.0 L CASA 236 HP at 4000 RPM, 550 N⋅m at 2000 RPM 6.64 lbf⋅ft
Audi gasoline V8 4.2 L BAR 345 HP 6.64 lbf⋅ft
expand_moreAll other modifications
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOutlet camshaft wheel
First stage 59 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreTension rail bearing screws
All Audi gasoline V6 3.6 L BHK engines 13.28 lbf⋅ft
expand_moreAll Audi diesel V8 4.1 L BTR engines
First stage 3.69 lbf⋅ft
Replace bolts.
Second stage 90°
expand_moreAll Audi diesel V12 5.9 L CCGA engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 8.85 lbf⋅ft
expand_moreTiming case cover
M6 6.64 lbf⋅ft
M8 16.96 lbf⋅ft
expand_moreTiming case cover first cylinder row
All Audi diesel V6 3.0 L BUN engines 6.64 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CASA engines
Cap 6.64 lbf⋅ft
Otherwise 6.64 lbf⋅ft
All Audi diesel V6 3.0 L CASB engines 6.64 lbf⋅ft
expand_moreAll other modifications
First stage 3.69 lbf⋅ft
Replace bolts and tighten crosswise.
Second stage 90°
expand_moreTiming case cover second cylinder row
All Audi diesel V6 3.0 L BUN engines 6.64 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CASA engines
Cap 6.64 lbf⋅ft
Otherwise 6.64 lbf⋅ft
All Audi diesel V6 3.0 L CASB engines 6.64 lbf⋅ft
expand_moreAll other modifications
First stage 3.69 lbf⋅ft
Replace bolts and tighten crosswise.
Second stage 90°
Toothed belt guard 6.64 lbf⋅ft
expand_moreToothed belt guard at the top
4.2 TDI with diesel V8 4.1 L 322 HP at 3750 RPM, 650 N⋅m at 1600 RPM engine (2007.3–2009.6) 6.64 lbf⋅ft
expand_moreToothed belt tensioning roller
All Audi diesel V8 4.1 L BTR engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L BUG engines 16.96 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L BUN engines
BUN engine 16.96 lbf⋅ft
CASB engine 16.96 lbf⋅ft
expand_moreAll other modifications
High-pressure pump 16.96 lbf⋅ft
Use new parts.
Toothed belt tightener 16.96 lbf⋅ft
expand_moreTop part of control unit housing
M6 6.64 lbf⋅ft
Audi gasoline V8 4.2 L BAR 345 HP 6.64 lbf⋅ft
expand_moreEngine lubrication
expand_moreOil cooler
All Audi gasoline V6 3.6 L BHK engines 18.44 lbf⋅ft
Replace sealing rings.
expand_moreAll Audi diesel V8 4.1 L BTR engines
First stage 5.9 lbf⋅ft
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L BUG engines
Heat-exchanger on oil filter housing 6.64 lbf⋅ft
All Audi diesel V6 3.0 L BUN engines 6.64 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CASA engines
Heat-exchanger on oil filter housing 6.64 lbf⋅ft
All Audi diesel V6 3.0 L CASB engines 6.64 lbf⋅ft
expand_moreAll Audi diesel V12 5.9 L CCGA engines
Nuts 4.43 lbf⋅ft
On the engine block 6.64 lbf⋅ft
expand_moreAll other modifications
First stage 2.21 lbf⋅ft
Second stage 90°
expand_moreOil cooler lines
6.0 TDI with diesel V12 5.9 L 493 HP at 3750 RPM, 1000 N⋅m at 1750 RPM engine (2008.9–2014.5) 5.9 lbf⋅ft
expand_moreOil drain plug
M14 22.13 lbf⋅ft
M24 36.88 lbf⋅ft
M14 22.13 lbf⋅ft
M24 36.88 lbf⋅ft
M14 22.13 lbf⋅ft
M24 36.88 lbf⋅ft
Audi gasoline V8 4.2 L BAR 345 HP 18.44 lbf⋅ft
All other modifications 22.13 lbf⋅ft
Replace sealing rings.
expand_moreOil filter
expand_moreAll Audi gasoline V6 3.6 L BHK engines
Cap 7.38 lbf⋅ft
Replace the O ring.
Oil filter cover 18.44 lbf⋅ft
Replace the O ring.
expand_moreAll Audi diesel V8 4.1 L BTR engines
Oil filter cover 25.81 lbf⋅ft
Replace the O ring.
expand_moreAll Audi diesel V6 3.0 L BUG engines
Oil filter cover 25.81 lbf⋅ft
Slightly oil sealing lips.
expand_moreAll Audi diesel V6 3.0 L CASA engines
Oil filter cover 25.81 lbf⋅ft
Slightly oil sealing lips.
expand_moreAll Audi diesel V12 5.9 L CCGA engines
Oil filter cover 25.81 lbf⋅ft
Replace the O ring.
expand_moreAll other modifications
Oil filter cover 18.44 lbf⋅ft
Slightly oil sealing lips.
expand_moreOil filter housing
Oil filter cover 25.81 lbf⋅ft
On the engine block 6.64 lbf⋅ft
On the engine block 6.64 lbf⋅ft
Audi gasoline V6 3.6 L BHK 276 HP at 6200 RPM, 360 N⋅m at 2500 RPM 16.96 lbf⋅ft
Audi diesel V8 4.1 L BTR 322 HP at 3750 RPM, 650 N⋅m at 1600 RPM 6.64 lbf⋅ft
Replace sealing rings.
Audi gasoline V8 4.2 L BAR 345 HP 18.44 lbf⋅ft
Oil filter housing cap
On the engine block 6.64 lbf⋅ft
All other modifications 9.59 lbf⋅ft
Oil pressure sensor 14.75 lbf⋅ft
Replace sealing rings.
expand_moreOil pump
All Audi gasoline V6 3.6 L BHK engines 5.9 lbf⋅ft
Use screw-locking compound.
All Audi diesel V8 4.1 L BTR engines 6.64 lbf⋅ft
Replace screws.
All Audi diesel V6 3.0 L BUN engines 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CASA engines 17.7 lbf⋅ft
All Audi diesel V6 3.0 L CASB engines 16.96 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 6.64 lbf⋅ft
Replace screws.
All Audi diesel V6 3.0 L CCMA engines 17.7 lbf⋅ft
All Audi diesel V6 3.0 L CJGA engines 17.7 lbf⋅ft
All Audi diesel V6 3.0 L CNRB engines 17.7 lbf⋅ft
All other modifications 14.75 lbf⋅ft
Replace screws.
expand_moreOil pump chain wheel
expand_moreAll Audi gasoline V6 3.6 L BHK engines
First stage 44.25 lbf⋅ft
Replace screws.
Second stage 90°
All Audi diesel V6 3.0 L BUG engines 47.2 lbf⋅ft
All Audi diesel V6 3.0 L BUN engines 47.2 lbf⋅ft
All Audi diesel V6 3.0 L CASA engines 47.2 lbf⋅ft
All Audi diesel V6 3.0 L CASB engines 47.2 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 44.25 lbf⋅ft
All Audi diesel V6 3.0 L CCMA engines 47.2 lbf⋅ft
All Audi diesel V6 3.0 L CJGA engines 47.2 lbf⋅ft
All Audi diesel V6 3.0 L CNRB engines 47.2 lbf⋅ft
expand_moreAll other modifications
First stage 22.13 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreOil sump
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Tighten the new screws evenly in several steps.
Second stage 90°
Oil sump top part 11.06 lbf⋅ft
Gradually tighten screws crosswise.
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
Gradually tighten screws crosswise.
Oil sump top part 11.06 lbf⋅ft
Gradually tighten screws crosswise.
expand_moreAt the gearbox
Oil sump top part 33.19 lbf⋅ft
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOil sump top part
Cap 25.81 lbf⋅ft
expand_moreOn the engine block
Oil sump top part 10.33 lbf⋅ft
Gradually tighten screws crosswise.
At the gearbox 33.19 lbf⋅ft
expand_moreOn the engine block
First stage 3.69 lbf⋅ft
Tighten the screws crosswise.
Second stage 8.85 lbf⋅ft
expand_moreOil sump lower part
First stage 3.69 lbf⋅ft
Second stage 5.9 lbf⋅ft
Third stage 90°
expand_moreOil sump top part
Figure 14. Engine lubrication, Oil sump, Audi diesel V8 4.1 L BTR 322 HP at 3750 RPM, 650 N⋅m at 1600 RPM, Oil sump top part.
Figure 14. Engine lubrication, Oil sump, Audi diesel V8 4.1 L BTR 322 HP at 3750 RPM, 650 N⋅m at 1600 RPM, Oil sump top part.
First stage 3.69 lbf⋅ft
See figure 14.
Second stage 11.06 lbf⋅ft
Oil sump lower part 6.64 lbf⋅ft
Oil sump top part 10.33 lbf⋅ft
First stage Tighten by hand
Replace screws.
Second stage 6.64 lbf⋅ft
expand_moreAll other modifications
expand_moreAluminium screws (oil sump top part)
First stage Screw in screw(s) by hand.
Replace screws.
Second stage 5.9 lbf⋅ft
Third stage 90°
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOil sump top part (steel screws)
First stage Screw in screw(s) by hand.
Replace screws.
Second stage 14.75 lbf⋅ft
expand_moreEngine management
expand_moreCamshaft sensor
All Audi gasoline V6 3.6 L BHK engines 7.38 lbf⋅ft
All other modifications 6.64 lbf⋅ft
expand_moreCharge air pressure sensor
All Audi diesel V8 4.1 L BTR engines 6.64 lbf⋅ft
All Audi diesel V6 3.0 L BUG engines 3.69 lbf⋅ft
All Audi diesel V6 3.0 L CASA engines 3.69 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 2.95 lbf⋅ft
All Audi diesel V6 3.0 L CCMA engines 3.69 lbf⋅ft
All Audi diesel V6 3.0 L CJGA engines 3.69 lbf⋅ft
All Audi diesel V6 3.0 L CNRB engines 3.69 lbf⋅ft
All other modifications 7.38 lbf⋅ft
Crankshaft sensor 6.64 lbf⋅ft
Replace screws.
Exhaust gas temperature sensor 33.19 lbf⋅ft
Use hot screw paste
expand_moreGlow plugs
All Audi diesel V6 3.0 L BUN engines 8.85 lbf⋅ft
All Audi diesel V6 3.0 L CASB engines 8.85 lbf⋅ft
All Audi diesel V12 5.9 L CCGA engines 8.85 lbf⋅ft
All other modifications 12.54 lbf⋅ft
Knock sensor 14.75 lbf⋅ft
expand_moreLambda sensor
Audi diesel V6 3.0 L BUN 208 HP 36.88 lbf⋅ft
Audi diesel V6 3.0 L CASB 208 HP 36.88 lbf⋅ft
Audi diesel V6 3.0 L CJGA 236 HP at 4000 RPM, 550 N⋅m at 2000 RPM 36.88 lbf⋅ft
Audi diesel V6 3.0 L CNRB 236 HP at 4000 RPM, 550 N⋅m at 2000 RPM 36.88 lbf⋅ft
Audi diesel V6 3.0 L CCMA 236 HP at 4000 RPM, 550 N⋅m at 2000 RPM 36.88 lbf⋅ft
Audi diesel V6 3.0 L CASA 236 HP at 4000 RPM, 550 N⋅m at 2000 RPM 36.88 lbf⋅ft
All other modifications 40.57 lbf⋅ft
Use hot screw paste
expand_moreEngine mounting
expand_moreEngine bracket
expand_moreAll Audi diesel V6 3.0 L BUN engines
First stage 36.88 lbf⋅ft
Second stage 90°
expand_moreAll Audi diesel V12 5.9 L CCGA engines
On engine mounting 55.32 lbf⋅ft
expand_moreOn the engine block
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
On engine mounting 55.32 lbf⋅ft
Replace nuts.
expand_moreOn the engine block
First stage 36.88 lbf⋅ft
Second stage 90°
expand_moreEngine mounting
expand_moreAll Audi diesel V6 3.0 L BUG engines
At the subframe 44.25 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CASA engines
At the subframe 44.25 lbf⋅ft
expand_moreAll Audi diesel V12 5.9 L CCGA engines
At the subframe 44.25 lbf⋅ft
expand_moreAll other modifications
At the subframe 44.25 lbf⋅ft
On engine bracket 55.32 lbf⋅ft
expand_moreSubframe
expand_moreOn chassis
expand_moreM14 × 1,5 screws
First stage 88.51 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreAll other modifications
First stage 88.51 lbf⋅ft
Second stage 180°
expand_moreExhaust system
expand_moreCatalytic converter
expand_moreAll Audi diesel V6 3.0 L BUG engines
At the turbocharger 16.96 lbf⋅ft
Replace the nuts and use fitting paste
expand_moreAll Audi diesel V6 3.0 L BUN engines
At the turbocharger 16.96 lbf⋅ft
Use hot screw paste
expand_moreAll Audi diesel V6 3.0 L CASA engines
At the turbocharger 16.96 lbf⋅ft
Use hot screw paste
All other modifications 16.96 lbf⋅ft
Replace the nuts and use fitting paste
Catalytic converter bracket 16.96 lbf⋅ft
Replace nuts.
expand_moreDiesel particulate filter
expand_moreAll Audi diesel V6 3.0 L BUG engines
On catalytic converter 16.96 lbf⋅ft
Replace seals and nuts.
expand_moreAll Audi diesel V6 3.0 L BUN engines
On catalytic converter 16.96 lbf⋅ft
Replace seals and nuts.
All other modifications 16.96 lbf⋅ft
Replace nuts. Use hot screw paste.
expand_moreExhaust manifold
At the cylinder head 18.44 lbf⋅ft
Replace nuts. Use hot screw paste.
Audi gasoline V6 3.6 L BHK 276 HP at 6200 RPM, 360 N⋅m at 2500 RPM 16.96 lbf⋅ft
Replace nuts.
First stage Tighten by hand
Tighten from inside to outside.
Second stage 18.44 lbf⋅ft
Replace nuts.
Third stage 18.44 lbf⋅ft
Fourth stage 18.44 lbf⋅ft
Fifth stage 90°
All other modifications 18.44 lbf⋅ft
Replace nuts. Use hot screw paste.
expand_moreExhaust manifold heat shields
All Audi gasoline V6 3.6 L BHK engines 14.75 lbf⋅ft
All Audi diesel V8 4.1 L BTR engines 7.38 lbf⋅ft
All other modifications 6.64 lbf⋅ft
expand_moreExhaust pipe
expand_moreAll Audi gasoline V6 3.6 L BHK engines
Clamps 16.96 lbf⋅ft
expand_moreAll Audi diesel V8 4.1 L BTR engines
Clamps 16.96 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L BUG engines
expand_moreOn exhaust manifold
First stage 7.38 lbf⋅ft
Replace nuts.
Second stage 22.13 lbf⋅ft
Third stage 90°
expand_moreAll Audi diesel V6 3.0 L CASA engines
expand_moreOn exhaust manifold
First stage 7.38 lbf⋅ft
Replace nuts.
Second stage 22.13 lbf⋅ft
Third stage 90°
expand_moreAll Audi diesel V12 5.9 L CCGA engines
Clamps 16.96 lbf⋅ft
expand_moreAll other modifications
Clamps 22.13 lbf⋅ft
expand_moreExhaust pipe bracket
expand_moreAll Audi diesel V8 4.1 L BTR engines
Clamps 16.96 lbf⋅ft
All other modifications 16.96 lbf⋅ft
expand_moreExhaust pipe rear
expand_moreAll Audi gasoline V6 3.6 L BHK engines
expand_moreClamps
With tail pipe 44.25 lbf⋅ft
Otherwise 16.96 lbf⋅ft
All Audi diesel V8 4.1 L BTR engines 16.96 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L BUG engines
Clamps 16.96 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CASA engines
Clamps 16.96 lbf⋅ft
expand_moreAll Audi diesel V12 5.9 L CCGA engines
expand_moreClamps
With tail pipe 44.25 lbf⋅ft
Otherwise 16.96 lbf⋅ft
expand_moreAll other modifications
Clamps 22.13 lbf⋅ft
Particle filter bracket 16.96 lbf⋅ft
Replace screws.
expand_morePrimary catalytic converter
All other modifications 16.96 lbf⋅ft
Replace nuts.
expand_moreFuel supply
Fuel filter bracket 5.9 lbf⋅ft
expand_moreFuel filter housing
expand_moreAll Audi diesel V12 5.9 L CCGA engines
Cap 5.9 lbf⋅ft
expand_moreAll other modifications
Fuel filter cover 5.9 lbf⋅ft
Replace sealing rings.
expand_moreFuel pump
expand_moreAll Audi diesel V12 5.9 L CCGA engines
Preliminary feed pump 81.13 lbf⋅ft
expand_moreAll other modifications
Preliminary feed pump 81.13 lbf⋅ft
Replace sealing rings.
expand_moreIgnition system
Spark plugs 22.13 lbf⋅ft
expand_moreStart system
expand_moreStarter
All Audi diesel V8 4.1 L BTR engines 33.19 lbf⋅ft
All other modifications 47.94 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2008 Audi Q7 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi Q7 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2008 Audi Q7 you're not only saving money, but also also improving your technical skills and learning something new.

Audi Q7 First generation model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat