2011 Audi Q7 front suspension fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreFront axle brake


Bleed valve	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Brake line	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreFront axle brake caliper


M16 × 1,5 screws	199.14 lbf⋅ft199.14 lbf⋅ft270 N⋅m
Use new screws.
M8 × 16 screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreFront axle brake disc


PR code 1LF	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
PR code 1LN	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
PR code 1LT	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
PR code 1LW	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


Wheel speed sensor	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreFront axle steering

expand_moreLower steering column joint


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace screws.
Second stage	90°90°90°


Pressure line at steering gear	23.6 lbf⋅ft23.6 lbf⋅ft32 N⋅m
Replace sealing rings.
Return line to steering gear	23.6 lbf⋅ft23.6 lbf⋅ft32 N⋅m
Replace sealing rings.
Steering column	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screws.

expand_moreSteering gear


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws and nuts.
Second stage	90°90°90°

expand_moreSteering wheel


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°


Track rod end on stub axle	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace nuts.
Track rod end on track rod	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Track rod on steering gear	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreFront axle suspension

expand_moreSuspension strut bearing pedestal


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


Shock-absorber piston rod	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace nuts.

expand_moreSuspension strut


At the bearing pedestal	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreAt the transverse control arm


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace nuts.
Second stage	90°90°90°

expand_moreWheel suspension

expand_moreFront axle drive shaft

expand_moreAudi diesel V6 3.0 L CJGC 201 HP at 3200 RPM, 450 N⋅m at 1350 RPM


Central nuts	368.78 lbf⋅ft368.78 lbf⋅ft500 N⋅m
Replace nuts.

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreM12


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreAudi diesel V6 3.0 L CJGD 241 HP at 3800 RPM, 550 N⋅m at 1750 RPM


Central nuts	368.78 lbf⋅ft368.78 lbf⋅ft500 N⋅m
Replace nuts.

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreM12


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreM12


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°


Front axle stabiliser mounting	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Stabiliser mounting at the stabiliser	81.13 lbf⋅ft81.13 lbf⋅ft110 N⋅m
Replace nuts.
Stabiliser mounting at suspension strut	81.13 lbf⋅ft81.13 lbf⋅ft110 N⋅m
Replace nuts.
Stabilizer mounting at the subframe	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreSupport joint at the stub axle

expand_moreOn stub axle


Bottom	77.44 lbf⋅ft77.44 lbf⋅ft105 N⋅m
Replace nuts.
Top	62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m
Replace nuts.

expand_moreUpper transverse control arm

expand_moreAt the bearing pedestal


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws and nuts.
Second stage	90°90°90°


On stub axle	62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m
Replace nuts.

expand_moreTrack control arm lower


At the subframe	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Replace nuts.
On stub axle	77.44 lbf⋅ft77.44 lbf⋅ft105 N⋅m
Replace nuts.

expand_moreWheel hub wheel bearing


Central nuts	368.78 lbf⋅ft368.78 lbf⋅ft500 N⋅m
Replace nuts.

expand_moreWheels and tires

expand_moreTire pressure sensors


Torx screws	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace the screw.
Union nuts	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m


Wheel attachment	118.01 lbf⋅ft118.01 lbf⋅ft160 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2011 Audi Q7 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Chassis and Body Fastener Tightening Specifications
Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi Q7 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2011 Audi Q7 you're not only saving money, but also also improving your technical skills and learning something new.

2011 Audi Q7 First generation facelift Front Suspension Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Audi Q7 First generation facelift model years

Suggest edit