2015 Audi A4 B8 facelift Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
First stage | Screw in new screw(s) hand-tight. |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | 2.21 lbf⋅ft |
Second stage | 7.38 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Nuts | 7.38 lbf⋅ft |
Screws | 14.75 lbf⋅ft |
First stage | screw in manually up to stop |
Second stage | 14.75 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 118 HP at 3650 RPM, 230 N⋅m at 1500 RPM engine (2008.1–2015.12) | 14.75 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 118 HP at 3650 RPM, 230 N⋅m at 1500 RPM engine (2008.1–2015.12) | 14.75 lbf⋅ft |
2.0 TFSI flexible fuel with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2009.11–2015.12) | 14.75 lbf⋅ft |
2.0 TFSI with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2008.6–2015.12) | 14.75 lbf⋅ft |
2.0 TFSI with gasoline straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2008.6–2015.12) | 14.75 lbf⋅ft |
2.0 TFSI with gasoline straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2008.6–2015.12) | 14.75 lbf⋅ft |
3.0 TDI with diesel V6 3.0 L 201 HP at 3750 RPM, 400 N⋅m at 1250 RPM engine (2011.11–2015.12) | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Second stage | 180° |
All Audi diesel straight-4 2.0 L CAGC engines | 16.96 lbf⋅ft |
All Audi diesel straight-4 2.0 L CAHB engines | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
All Audi diesel straight-4 2.0 L CGLD engines | 16.96 lbf⋅ft |
All Audi diesel straight-4 2.0 L CJCC engines | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel straight-4 2.0 L CNHC engines | 16.96 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Steel screws | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 180° |
Steel screws | 18.44 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | Tighten bolt(s) until hand-tight. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 60° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 60° |
All Audi diesel V6 3.0 L CLAB engines | 29.5 lbf⋅ft |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M6 | 6.64 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Use new screws. | |
Second stage | 180° |
Steel screws | 16.96 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
First stage | Tighten bolt(s) until hand-tight. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 60° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 60° |
All Audi diesel V6 3.0 L CLAB engines | 29.5 lbf⋅ft |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
With active steering | 28.03 lbf⋅ft |
Without active steering | 6.64 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
Union nuts | 28.03 lbf⋅ft |
With active steering | 18.44 lbf⋅ft |
Without active steering | 16.23 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
With active steering | 18.44 lbf⋅ft |
Without active steering | 18.44 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Vacuum pump | 7.38 lbf⋅ft |
Injection pump drive wheel | 55.32 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CAED engines | 3.69 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJEB engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CNCD engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 14.75 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CAED engines | 19.91 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJEB engines | 19.91 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CNCD engines | 14.75 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 20.65 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Check compressed air line. |
All Audi gasoline straight-4 2.0 L CAED engines | 14.75 lbf⋅ft |
Tighten bolts uniformly in several passes. |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel V6 3.0 L CLAB engines | 16.23 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CNCD engines | 14.75 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Central nuts | 51.63 lbf⋅ft |
Central nuts | 70.07 lbf⋅ft |
Central nuts | 70.07 lbf⋅ft |
Wheel | 14.75 lbf⋅ft |
Replace screws. |
Injection hoses | 18.44 lbf⋅ft |
Check compressed air line. |
Nuts | 7.38 lbf⋅ft |
Screws | 3.69 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Nuts | 7.38 lbf⋅ft |
Screws | 3.69 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Retaining clamp | 10.33 lbf⋅ft |
First stage | 1.48 lbf⋅ft |
Replace screws. | |
Second stage | 6.64 lbf⋅ft |
Third stage | 180° |
Nuts | 7.38 lbf⋅ft |
Screws | 3.69 lbf⋅ft |
High-pressure pump | 7.38 lbf⋅ft |
Replace screws. |
High-pressure pump | 14.75 lbf⋅ft |
Pressure tube connection | 29.5 lbf⋅ft |
Replace components. |
All Audi diesel straight-4 2.0 L CNHA engines | 5.9 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. |
All Audi gasoline straight-4 2.0 L CAED engines | 22.13 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CNCD engines | 22.13 lbf⋅ft |
At the turbocharger | 14.75 lbf⋅ft |
On the engine block | 29.5 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
Banjo screws | 25.81 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 2.0 L CNCD engines | 6.64 lbf⋅ft |
Banjo screws | 25.81 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 2.0 L CNCD engines | 6.64 lbf⋅ft |
Banjo screws | 22.13 lbf⋅ft |
Replace sealing rings. | |
Screws | 6.64 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 2.0 L CNCD engines | 6.64 lbf⋅ft |
Banjo screws | 22.13 lbf⋅ft |
Replace sealing rings. | |
Union nuts | 16.23 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
At the turbocharger | 10.33 lbf⋅ft |
On engine sump | 7.38 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Replace sealing rings. |
1.8 TFSI with gasoline straight-4 1.8 L 118 HP at 3650 RPM, 230 N⋅m at 1500 RPM engine (2008.1–2015.12) | 6.64 lbf⋅ft |
Tighten cross-wise. | |
1.8 TFSI with gasoline straight-4 1.8 L 118 HP at 3650 RPM, 230 N⋅m at 1500 RPM engine (2008.1–2015.12) | 6.64 lbf⋅ft |
Tighten cross-wise. |
On the engine block | 6.64 lbf⋅ft |
Tighten cross-wise. | |
Otherwise | 6.64 lbf⋅ft |
Tighten cross-wise. |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
2.0 TFSI flexible fuel with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2009.11–2015.12) | 6.64 lbf⋅ft |
Tighten cross-wise. | |
2.0 TFSI with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2008.6–2015.12) | 6.64 lbf⋅ft |
Tighten cross-wise. | |
2.0 TFSI with gasoline straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2008.6–2015.12) | 6.64 lbf⋅ft |
Tighten cross-wise. | |
2.0 TFSI with gasoline straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2008.6–2015.12) | 6.64 lbf⋅ft |
Tighten cross-wise. | |
2.0 TFSI with gasoline straight-4 2.0 L 217 HP engine (2013.5–2015.12) | 6.64 lbf⋅ft |
2.0 TFSI with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–2015.12) | 6.64 lbf⋅ft |
3.0 TDI with diesel V6 3.0 L 201 HP at 3750 RPM, 400 N⋅m at 1250 RPM engine (2011.11–2015.12) | 6.64 lbf⋅ft |
Gradually tighten screws crosswise. | |
All other modifications | 11.06 lbf⋅ft |
Coolant pump pulley | 16.96 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Use new screw. (left-hand thread) | |
Second stage | 90° |
First stage | Tighten bolt(s) until hand-tight. |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | Tighten bolt(s) until hand-tight. |
Note correct order of tensioning. | |
Second stage | 7.38 lbf⋅ft |
First stage | Tighten bolt(s) until hand-tight. |
Note correct order of tensioning. | |
Second stage | 7.38 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | Screw in screw(s) by hand. |
Note correct order of tensioning. | |
Second stage | 6.64 lbf⋅ft |
First stage | Tighten bolt(s) until hand-tight. |
Note correct order of tensioning. | |
Second stage | 5.9 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Tighten the screws evenly from inside to outside in several steps. |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
First step | 5.9 lbf⋅ft |
Replace screws. | |
Second step | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
First step | 5.9 lbf⋅ft |
Replace screws. | |
Second step | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
First step | 5.9 lbf⋅ft |
Replace screws. | |
Second step | 90° |
Fourth stage | 29.5 lbf⋅ft |
Replace screws. | |
Fifth stage | 90° |
Sixth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
Fifth stage | 29.5 lbf⋅ft |
Replace screws. | |
Sixth stage | 90° |
Seventh stage | 90° |
First step | 5.9 lbf⋅ft |
Replace screws. | |
Second step | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 5.9 lbf⋅ft |
Replace screws. | |
Fifth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 2.95 lbf⋅ft |
Replace screws. | |
Fifth stage | 90° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 25.81 lbf⋅ft |
Third stage | 51.63 lbf⋅ft |
Fourth stage | 90° |
Fifth stage | 90° |
First stage | 29.5 lbf⋅ft |
Use new screws. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | Tighten by hand |
Gradually tighten screws crosswise. | |
Second stage | 7.38 lbf⋅ft |
CJCA engine | 6.64 lbf⋅ft |
Tighten gradually and alternately from inside to outside. |
First stage | Tighten by hand |
Gradually tighten screws crosswise. | |
Second stage | 7.38 lbf⋅ft |
First stage | Tighten by hand |
Gradually tighten screws crosswise. | |
Second stage | 7.38 lbf⋅ft |
All Audi diesel straight-4 2.0 L CGLC engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CJCD engines | 6.64 lbf⋅ft |
Tighten the screws crosswise. |
First stage | Screw in screw(s) by hand. |
Replace screws. |
First step | 5.9 lbf⋅ft |
Second step | 90° |
All Audi diesel straight-4 2.0 L CMFB engines | 6.64 lbf⋅ft |
Tighten the screws crosswise. | |
All Audi diesel straight-4 2.0 L CMGB engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 6.64 lbf⋅ft |
Tighten gradually and alternately from inside to outside. | |
All Audi diesel straight-4 2.0 L CSUA engines | 6.64 lbf⋅ft |
Tighten the screws crosswise. |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
Valve cover locking screws | 3.69 lbf⋅ft |
Bearing casing | 6.64 lbf⋅ft |
Replace screws. |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 7.38 lbf⋅ft |
Use new screw. (left-hand thread) | |
Second stage | 90° |
Central screws | 44.25 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Shaft must be replaced when the screw connection has been loosened. | |
Second stage | 90° |
Wheel | 16.96 lbf⋅ft |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 7.38 lbf⋅ft |
Use new screw. (left-hand thread) | |
Second stage | 90° |
On the engine block | 6.64 lbf⋅ft |
First stage | Screw in screw(s) finger tight. |
Replace screws. | |
Second stage | 4.43 lbf⋅ft |
Fifth stage | 90° |
Third stage | 14.75 lbf⋅ft |
Fourth stage | 9.59 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Oil screw head support and thread. |
First stage | 33.19 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 25.81 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 132.76 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Third stage | 45° |
First stage | 132.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Oil screw head support and thread. | |
Third stage | 45° |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 132.76 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Third stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
3.0 TDI with diesel V6 3.0 L 201 HP at 3750 RPM, 400 N⋅m at 1250 RPM engine (2011.11–2015.12) | 18.44 lbf⋅ft |
Flywheel | 44.25 lbf⋅ft |
Replace screws. |
First stage | 4.43 lbf⋅ft |
Replace screws. |
First step | 9.59 lbf⋅ft |
Second step | 90° |
First step | 14.75 lbf⋅ft |
Second step | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace screws. | |
Second stage | 4.43 lbf⋅ft |
Fifth stage | 90° |
Third stage | 9.59 lbf⋅ft |
Fourth stage | 14.75 lbf⋅ft |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. |
First step | 36.88 lbf⋅ft |
Second step | 180° |
All Audi diesel straight-4 2.0 L CNHA engines | Component must not be knocked down. |
First stage | Screw in screw(s) by hand. |
Replace screws. |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 14.75 lbf⋅ft |
Fifth stage | 90° |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Balance shaft timing chain guide rail | 14.75 lbf⋅ft |
Balance shaft timing chain tension rail | 14.75 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 45° |
Bearing casing | 6.64 lbf⋅ft |
Camshaft adjuster valve | 6.64 lbf⋅ft |
Central screws | 25.81 lbf⋅ft |
Use new screw. (left-hand thread) |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 2.95 lbf⋅ft |
Second stage | 45° |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
Camshaft adjuster valve | 5.9 lbf⋅ft |
Cap | 5.9 lbf⋅ft |
Central screws | 36.88 lbf⋅ft |
Bearing casing | 6.64 lbf⋅ft |
Cap | 6.64 lbf⋅ft |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
Camshaft timing chain guide rail | 14.75 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 14.75 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Wheel | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Wheel | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Replace screws. Use screw-locking compound. |
All Audi diesel V6 3.0 L CLAB engines | 16.96 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Clamping screws | 6.64 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
All other modifications | 8.85 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Central screws | 33.19 lbf⋅ft |
Bottom | 8.85 lbf⋅ft |
Use screw-locking compound. |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 62.69 lbf⋅ft |
Injection pump drive belt tensioning roller | 16.96 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace screw and intermediate wheel when loosening the screw. | |
Second stage | for freedom from play |
Third stage | 18.44 lbf⋅ft |
Fourth stage | 90° |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Replace the screws and sprocket wheel. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screw and intermediate wheel when loosening the screw. | |
Second stage | for freedom from play |
First step | 18.44 lbf⋅ft |
Second step | 90° |
First stage | 7.38 lbf⋅ft |
Replace the screws and sprocket wheel. | |
Second stage | for freedom from play |
First step | 18.44 lbf⋅ft |
Second step | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel V6 3.0 L CLAB engines | 16.96 lbf⋅ft |
All other modifications | 8.85 lbf⋅ft |
Use screw-locking compound. |
First stage | 6.64 lbf⋅ft |
Second stage | 2.21 lbf⋅ft |
Replace screws. | |
Third stage | 2.21 lbf⋅ft |
Control tensioner | |
Fifth stage | 90° |
Fourth stage | 5.9 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace bolts and tighten crosswise. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace bolts and tighten crosswise. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Toothed belt guard | 7.38 lbf⋅ft |
Toothed belt guard at the bottom | 7.38 lbf⋅ft |
Toothed belt guard center | 7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace nuts. | |
Second stage | 45° |
All other modifications | 6.64 lbf⋅ft |
Tighten cross-wise. |
All Audi gasoline straight-4 1.8 L CABA engines | 16.96 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CAED engines | 16.96 lbf⋅ft |
CAGA engine | 18.44 lbf⋅ft |
CJCA engine | 8.11 lbf⋅ft |
Locking screws | 18.44 lbf⋅ft |
Screws | 8.11 lbf⋅ft |
All Audi diesel straight-4 2.0 L CAGC engines | 18.44 lbf⋅ft |
All Audi diesel straight-4 2.0 L CAHB engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CDHA engines | 16.96 lbf⋅ft |
All Audi diesel straight-4 2.0 L CGLC engines | 5.16 lbf⋅ft |
All Audi diesel straight-4 2.0 L CGLD engines | 18.44 lbf⋅ft |
All Audi diesel straight-4 2.0 L CJCC engines | 18.44 lbf⋅ft |
All Audi diesel straight-4 2.0 L CJCD engines | 8.11 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 45° |
All Audi diesel V6 3.0 L CLAB engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CMFB engines | 8.11 lbf⋅ft |
All Audi diesel straight-4 2.0 L CMGB engines | 5.16 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
All Audi diesel straight-4 2.0 L CNHC engines | 18.44 lbf⋅ft |
All Audi diesel straight-4 2.0 L CSUA engines | 8.11 lbf⋅ft |
Heat-exchanger on oil filter housing | 16.96 lbf⋅ft |
Oil drain plug | 22.13 lbf⋅ft |
Replace screws and sealing rings. |
First stage | 11.06 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
First stage | 10.33 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
First stage | 10.33 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
Replace sealing rings. |
First stage | 10.33 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
Oil filter cover | 25.81 lbf⋅ft |
On the engine block | 6.64 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
Replace sealing rings. |
Oil filter cover | 18.44 lbf⋅ft |
Replace sealing rings. |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Tighten alternately starting from the top left | |
Second stage | 90° |
Use new screws. |
First stage | 5.9 lbf⋅ft |
Use new screws | |
Second stage | 90° |
CAGB engine | 6.64 lbf⋅ft |
CJCB engine | 7.38 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 148 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2013.5–2015.12) | 6.64 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 148 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2013.5–2015.12) | 6.64 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 148 HP at 4200 RPM, 320 N⋅m at 1750 RPM engine (2013.5–2015.12) | 6.64 lbf⋅ft |
First stage | 8.85 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 14.75 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
All other modifications | 44.25 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. |
Second stage | 180° |
Third stage | 45° |
Fourth stage | 180° |
Fifth stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
tighten gradually cross-wise |
Second stage | 11.06 lbf⋅ft |
Third stage | 90° |
Fourth stage | 9.59 lbf⋅ft |
tighten gradually cross-wise |
Fifth stage | 16.96 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Second stage | 11.06 lbf⋅ft |
Third stage | 90° |
Fourth stage | 9.59 lbf⋅ft |
Fifth stage | 29.5 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. |
Second stage | 180° |
Third stage | 45° |
Fourth stage | 180° |
Fifth stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 2.21 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Locking screws | 18.44 lbf⋅ft |
TDC marking. |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M10 | 29.5 lbf⋅ft |
M7 | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
Camshaft sensor | 7.38 lbf⋅ft |
Use new screw. | |
Charge air pressure sensor | 3.69 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJEB engines | 7.38 lbf⋅ft |
All Audi diesel V6 3.0 L CLAB engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CNCD engines | 6.64 lbf⋅ft |
All other modifications | 3.32 lbf⋅ft |
At the turbocharger | 33.19 lbf⋅ft |
On particle filter | 44.25 lbf⋅ft |
On exhaust manifold | 33.19 lbf⋅ft |
On particle filter | 44.25 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
With combustion chamber pressure sensor | 8.85 lbf⋅ft |
Without combustion chamber pressure sensor | 12.54 lbf⋅ft |
All other modifications | 12.54 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJEB engines | 14.75 lbf⋅ft |
Replace screws. |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 14.75 lbf⋅ft |
Lambda sensor | 40.57 lbf⋅ft |
Engine bracket | 29.5 lbf⋅ft |
At the subframe | 40.57 lbf⋅ft |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 84.82 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Use new screws. | |
Second stage | 135° |
First stage | 66.38 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
On chassis | 18.44 lbf⋅ft |
On engine | 29.5 lbf⋅ft |
Cross support | 29.5 lbf⋅ft |
On the engine block | 18.44 lbf⋅ft |
All Audi diesel straight-4 2.0 L CAGA engines | 16.96 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CAGB engines | 16.96 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CJCA engines | 16.96 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CJCB engines | 16.96 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CMEA engines | 16.96 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CMFA engines | 16.96 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CSUB engines | 16.96 lbf⋅ft |
Replace the nuts and use fitting paste | |
All other modifications | 29.5 lbf⋅ft |
Replace nuts. Use hot screw paste. |
Catalytic converter bracket | 16.96 lbf⋅ft |
Clamps | 5.16 lbf⋅ft |
Use new parts. |
All other modifications | 16.96 lbf⋅ft |
Replace nuts. Use hot screw paste. |
Bottom | 22.13 lbf⋅ft |
Replace nuts. Use hot screw paste. |
First stage | 3.69 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
Second stage | 8.85 lbf⋅ft |
Third stage | 11.8 lbf⋅ft |
Fourth stage | 18.44 lbf⋅ft |
All Audi diesel straight-4 2.0 L CAGA engines | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Audi diesel straight-4 2.0 L CAGB engines | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CAGC engines | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CAHB engines | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CGLC engines | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Audi diesel straight-4 2.0 L CGLD engines | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CJCA engines | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Audi diesel straight-4 2.0 L CJCB engines | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CJCC engines | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CJCD engines | 18.44 lbf⋅ft |
Replace nuts. |
At the cylinder head | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. |
First stage | 22.13 lbf⋅ft |
Replace screws. Use hot screw paste. | |
Second stage | 90° |
All Audi diesel straight-4 2.0 L CMEA engines | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Audi diesel straight-4 2.0 L CMFA engines | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Audi diesel straight-4 2.0 L CMFB engines | 18.44 lbf⋅ft |
Replace nuts. | |
All Audi diesel straight-4 2.0 L CMGB engines | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. |
First stage | 8.11 lbf⋅ft |
Tighten crosswise from inside to outside. | |
Second stage | 16.23 lbf⋅ft |
Third stage | 16.23 lbf⋅ft |
Control tensioner |
All Audi diesel straight-4 2.0 L CNHC engines | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel straight-4 2.0 L CSUA engines | 18.44 lbf⋅ft |
Replace nuts. | |
All Audi diesel straight-4 2.0 L CSUB engines | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste |
Bottom | 22.13 lbf⋅ft |
Replace nuts. |
First stage | 3.69 lbf⋅ft |
Replace nuts. | |
Second stage | 8.85 lbf⋅ft |
Tighten cross-wise. | |
Third stage | 11.8 lbf⋅ft |
Fourth stage | 18.44 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CNCD engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 11.06 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Exhaust pipe | 16.96 lbf⋅ft |
Replace the nuts and use fitting paste | |
Exhaust pipe bracket | 16.96 lbf⋅ft |
Exhaust pipe rear | 18.44 lbf⋅ft |
Union nuts | 19.91 lbf⋅ft |
Spark plugs | 22.13 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 118 HP at 3650 RPM, 230 N⋅m at 1500 RPM engine (2008.1–2015.12) | 47.94 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 118 HP at 3650 RPM, 230 N⋅m at 1500 RPM engine (2008.1–2015.12) | 47.94 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 168 HP at 3800 RPM, 320 N⋅m at 1400 RPM engine (2011.11–2015.12) | 47.94 lbf⋅ft |
2.0 TFSI flexible fuel with flexfuel straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2009.11–2015.12) | 47.94 lbf⋅ft |
M10 × 50 screws | 47.94 lbf⋅ft |
M10 | 47.94 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2015 Audi A4 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A4 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2015 Audi A4 you're not only saving money, but also also improving your technical skills and learning something new.
2015 Audi A4 generations
In 2015 Audi offered 2 generations of the A4. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.