1997 Volkswagen Transporter Van T4 GP (T4 facelift) Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
PR code 1LA | 25.81 lbf⋅ft |
Screws must be replaced. | |
PR code 1LB | 18.44 lbf⋅ft |
Nuts | 51.63 lbf⋅ft |
Screws | 66.38 lbf⋅ft |
PR code 1LP | 25.81 lbf⋅ft |
Screws must be replaced. | |
PR code 1LU | 18.44 lbf⋅ft |
PR code 1LB | 261.83 lbf⋅ft |
Otherwise | 206.52 lbf⋅ft |
2.5 TDI Syncro with diesel straight-5 2.5 L 101 HP engine (1996.1–2003.4) | 3.69 lbf⋅ft |
Screws must be replaced. | |
2.5 TDI Syncro with diesel straight-5 2.5 L 101 HP engine (1996.1–2003.4) | 3.69 lbf⋅ft |
Screws must be replaced. | |
2.8 VR 6 with gasoline vr-6 2.8 L 138 HP engine (1995.11–2000.4) | 3.69 lbf⋅ft |
Screws must be replaced. | |
All other modifications | 7.38 lbf⋅ft |
Wheel speed sensor | 7.38 lbf⋅ft |
M8 | 24.34 lbf⋅ft |
Nuts must be replaced. | |
M10 | 44.25 lbf⋅ft |
Nuts must be replaced. |
Vehicles manufactured after 1996 | 47.94 lbf⋅ft |
Nuts must be replaced. |
Track rod end on track rod | 40.57 lbf⋅ft |
At the transverse control arm | 118.01 lbf⋅ft |
Screws and nuts must be replaced. |
At the gearbox | 59 lbf⋅ft |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Center | 22.13 lbf⋅ft |
Otherwise | 40.57 lbf⋅ft |
Stabiliser mounting at the stabiliser | 73.76 lbf⋅ft |
First stage | 40.57 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 40.57 lbf⋅ft |
Parts must be replaced. | |
Second stage | 90° |
M12 × 1,5 screws | 44.25 lbf⋅ft |
Screws and nuts must be replaced. | |
M14 | 73.76 lbf⋅ft |
Screws and nuts must be replaced. |
M12 × 1,5 screws | 44.25 lbf⋅ft |
Screws and nuts must be replaced. | |
M14 | 73.76 lbf⋅ft |
Screws and nuts must be replaced. |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Vehicles manufactured after 01.1996 | 125.39 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1997 Volkswagen Transporter Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Transporter Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 1997 Volkswagen Transporter Van you're not only saving money, but also also improving your technical skills and learning something new.
1997 Volkswagen Transporter Van generations
In 1997 Volkswagen offered 2 generations of the Transporter Van. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.