2022 Volkswagen Tiguan First generation facelift Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
1.4 TSI 4motion with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2007.9–) | 14.75 lbf⋅ft |
1.4 TSI 4motion with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2007.9–) | 14.75 lbf⋅ft |
1.4 TSI 4motion with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2007.9–) | 14.75 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 121 HP at 5500 RPM, 200 N⋅m at 1500 RPM engine (2010.8–) | 14.75 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2008.5–) | 14.75 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2008.5–) | 14.75 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2008.5–) | 14.75 lbf⋅ft |
2.0 TSI 4motion with gasoline straight-4 2.0 L 177 HP at 4500 RPM, 280 N⋅m at 1700 RPM engine (2011.5–) | 18.44 lbf⋅ft |
All other modifications | 5.9–6.64 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1800 RPM engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TSI 4motion with gasoline straight-4 2.0 L 177 HP at 4500 RPM, 280 N⋅m at 1700 RPM engine (2011.5–) | 7.38 lbf⋅ft |
Top | 16.96 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Compressor belt | 16.96 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Second stage | 90° |
2.0 TDI 4motion with diesel straight-4 2.0 L 134 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2007.11–) | 33.19 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 134 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2007.11–) | 33.19 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2007.9–) | 33.19 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2007.9–) | 33.19 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP engine (2007.9–) | 33.19 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2007.9–) | 33.19 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2007.9–) | 33.19 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2008.3–) | 33.19 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2008.3–) | 33.19 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
1.4 TSI 4motion with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2007.9–) | 18.44 lbf⋅ft |
1.4 TSI 4motion with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2007.9–) | 18.44 lbf⋅ft |
1.4 TSI 4motion with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2007.9–) | 18.44 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 121 HP at 5500 RPM, 200 N⋅m at 1500 RPM engine (2010.8–) | 18.44 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2008.5–) | 18.44 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2008.5–) | 18.44 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2008.5–) | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Air-conditioning compressor pressure line | 16.23 lbf⋅ft |
Alternator | 16.96–18.44 lbf⋅ft |
With freewheel | 59 lbf⋅ft |
Without freewheel | 47.94 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 121 HP at 5500 RPM, 200 N⋅m at 1500 RPM engine (2010.8–) | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Vacuum pump | 7.38 lbf⋅ft |
Exhaust gas return cooler | 6.64 lbf⋅ft |
Exhaust gas return valve | 6.64 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CBAA engines | 14.75 lbf⋅ft |
Sealing rings must be replaced. |
Nuts | 17.7 lbf⋅ft |
Sealing rings must be replaced. | |
Screws | 6.64 lbf⋅ft |
Sealing rings must be replaced. |
All Volkswagen diesel straight-4 2.0 Liters CFFD engines | 6.64 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 6.64 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CBAB engines | 14.75 lbf⋅ft |
Sealing rings must be replaced. |
Nuts | 17.7 lbf⋅ft |
Sealing rings must be replaced. | |
Screws | 6.64 lbf⋅ft |
Sealing rings must be replaced. |
2.0 TDI 4motion with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2007.9–) | 16.23 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2007.9–) | 16.23 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 174 HP engine (2012.11–) | 16.23 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 109 HP at 2750 RPM, 280 N⋅m at 1750 RPM engine (2010.5–) | 16.23 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2008.3–) | 16.23 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2008.3–) | 16.23 lbf⋅ft |
First stage | 2.21 lbf⋅ft |
Second stage | 6.64 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZD engines | 13.28 lbf⋅ft |
All other modifications | 20.65 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 14.75 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
Bolts must be replaced. |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Central nuts | 70.07 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Central nuts | 70.07 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Central nuts | 70.07 lbf⋅ft |
Wheel | 14.75 lbf⋅ft |
Screws must be replaced. |
All Volkswagen diesel straight-4 2.0 Liters CBAA engines | 18.44 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFFA engines | 18.44 lbf⋅ft |
All other modifications | 20.65 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Nuts | 7.38 lbf⋅ft |
Screws | 3.69 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Nuts | 7.38 lbf⋅ft |
Screws | 3.69 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 174 HP engine (2012.11–) | 6.64 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 109 HP at 2750 RPM, 280 N⋅m at 1750 RPM engine (2010.5–) | 6.64 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2008.3–) | 7.38 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2008.3–) | 7.38 lbf⋅ft |
M6 × 25 screws | 7.38 lbf⋅ft |
M8 × 20 screws | 18.44 lbf⋅ft |
At the cylinder head | 18.44 lbf⋅ft |
Nuts must be replaced. |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZD engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFFD engines | 16.96 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 16.96 lbf⋅ft |
Turbocharger coolant feed line | 5.9 lbf⋅ft |
Sealing rings must be replaced. | |
Turbocharger coolant return line | 5.9 lbf⋅ft |
Sealing rings must be replaced. |
At the turbocharger | 22.13 lbf⋅ft |
Parts must be replaced. | |
On the engine block | 14.75 lbf⋅ft |
At the turbocharger | 5.9 lbf⋅ft |
On the engine block | 22.13 lbf⋅ft |
Bolts must be replaced. |
Support screws | 7.38 lbf⋅ft |
Union nuts | 16.23 lbf⋅ft |
Union nuts at turbocharger | 16.23 lbf⋅ft |
Banjo bolts on the engine block | 22.13 lbf⋅ft |
Sealing rings must be replaced. |
Support screws | 7.38 lbf⋅ft |
Union nuts | 16.23 lbf⋅ft |
At the turbocharger | 16.23 lbf⋅ft |
Banjo bolts on the engine block | 22.13 lbf⋅ft |
Sealing rings must be replaced. |
Support screws | 7.38 lbf⋅ft |
Union nuts | 16.23 lbf⋅ft |
Banjo bolts on the engine block | 22.13 lbf⋅ft |
Sealing rings must be replaced. | |
Union nuts | 16.23 lbf⋅ft |
Support screws | 7.38 lbf⋅ft |
Union nuts | 16.23 lbf⋅ft |
Banjo bolts on the engine block | 22.13 lbf⋅ft |
Sealing rings must be replaced. | |
Union nuts | 16.23 lbf⋅ft |
Support screws | 7.38 lbf⋅ft |
Union nuts | 16.23 lbf⋅ft |
Banjo bolts on the engine block | 22.13 lbf⋅ft |
Sealing rings must be replaced. | |
Union nuts | 16.23 lbf⋅ft |
At the turbocharger | 5.9 lbf⋅ft |
On the engine block | 22.13 lbf⋅ft |
Bolts must be replaced. |
All Volkswagen gasoline straight-4 1.4 Liters BWK engines | 22.13 lbf⋅ft |
Parts must be replaced. |
At the turbocharger | 22.13 lbf⋅ft |
Parts must be replaced. | |
On the engine block | 14.75 lbf⋅ft |
Parts must be replaced. |
At the turbocharger | 22.13 lbf⋅ft |
Parts must be replaced. | |
On the engine block | 14.75 lbf⋅ft |
Parts must be replaced. |
At the turbocharger | 11.06 lbf⋅ft |
Sealing rings must be replaced. | |
Support at turbocharger | 14.75 lbf⋅ft |
Banjo bolts on the engine block | 44.25 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 12.54 lbf⋅ft |
Use new seal and screws. | |
Support at turbocharger | 14.75 lbf⋅ft |
Banjo bolts on the engine block | 29.5 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 11.06 lbf⋅ft |
Sealing rings must be replaced. | |
Support at turbocharger | 14.75 lbf⋅ft |
Banjo bolts on the engine block | 44.25 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 12.54 lbf⋅ft |
Use new seal and screws. | |
Support at turbocharger | 14.75 lbf⋅ft |
Banjo bolts on the engine block | 29.5 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 12.54 lbf⋅ft |
Use new seal and screws. | |
Support at turbocharger | 14.75 lbf⋅ft |
Banjo bolts on the engine block | 29.5 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 11.06 lbf⋅ft |
Sealing rings must be replaced. | |
Support at turbocharger | 14.75 lbf⋅ft |
Banjo bolts on the engine block | 44.25 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 11.06 lbf⋅ft |
Sealing rings must be replaced. | |
Support at turbocharger | 14.75 lbf⋅ft |
Banjo bolts on the engine block | 44.25 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 12.54 lbf⋅ft |
Use new seal and screws. | |
Support at turbocharger | 14.75 lbf⋅ft |
Banjo bolts on the engine block | 29.5 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 12.54 lbf⋅ft |
Use new seal and screws. | |
Support at turbocharger | 14.75 lbf⋅ft |
Banjo bolts on the engine block | 29.5 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 11.06 lbf⋅ft |
Sealing rings must be replaced. | |
Support at turbocharger | 14.75 lbf⋅ft |
Banjo bolts on the engine block | 44.25 lbf⋅ft |
Use new seal and screws. |
All other modifications | 5.9 lbf⋅ft |
Sealing rings must be replaced. |
1.4 TSI 4motion with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2007.9–) | 5.9 lbf⋅ft |
1.4 TSI 4motion with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2007.9–) | 5.9 lbf⋅ft |
1.4 TSI 4motion with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2007.9–) | 5.9 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 121 HP at 5500 RPM, 200 N⋅m at 1500 RPM engine (2010.8–) | 6.64 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2008.5–) | 5.9 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2008.5–) | 5.9 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2008.5–) | 5.9 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 6.64 lbf⋅ft |
Tighten cross-wise. | |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 6.64 lbf⋅ft |
Tighten cross-wise. | |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 6.64 lbf⋅ft |
Tighten cross-wise. | |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1800 RPM engine (2007.9–) | 6.64 lbf⋅ft |
Tighten cross-wise. | |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP engine (2007.9–) | 6.64 lbf⋅ft |
Tighten cross-wise. | |
2.0 TSI 4motion with gasoline straight-4 2.0 L 177 HP at 4500 RPM, 280 N⋅m at 1700 RPM engine (2011.5–) | 6.64 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
Coolant pump pulley | 17.7 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 181 HP at 3500 RPM, 380 N⋅m at 1750 RPM engine (2015.5–) | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 14.75 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Bolts must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZD engines | 7.38 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFFD engines | 6.64 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 6.64 lbf⋅ft |
First stage | Tighten bolt(s) until hand-tight. |
See figure 1. | |
Second stage | 7.38 lbf⋅ft |
First stage | Tighten bolt(s) until hand-tight. |
See figure 1. | |
Second stage | 7.38 lbf⋅ft |
First stage | Tighten by hand |
Tighten in steps from inside to outside. See figure 2. | |
Second stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Third stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Tighten gradually and alternately from inside to outside. |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Bolts must be replaced. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 4. | |
Second stage | 90° |
Third stage | 90° |
First step | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second step | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 5. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Fifth stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 6. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Tighten gradually cross-wise |
First stage | 14.75 lbf⋅ft |
Bolts must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. Left-hand thread. | |
Second stage | 90° |
On the engine block | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZD engines | 6.64 lbf⋅ft |
Bolts must be replaced. |
First stage | 9.59 lbf⋅ft |
Bolts must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Bolts must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Bolts must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Bolts must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Bolts must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 2.0 Liters CAWA engines | 8.11 lbf⋅ft |
Tighten screws crosswise. | |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 3.69 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZC engines | 8.11 lbf⋅ft |
Tighten screws crosswise. | |
All Volkswagen gasoline straight-4 2.0 Liters CCZD engines | 6.64 lbf⋅ft |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 110.63 lbf⋅ft |
Bolts must be replaced. | |
Second stage | 180° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 132.76 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Third stage | 45° |
First stage | 110.63 lbf⋅ft |
Screws and seals must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws and seals must be replaced. | |
Second stage | 90° |
First stage | 88.51 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Engine block closure screws | 22.13 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Bolts must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Bolts must be replaced. | |
Second stage | 90° |
2.0 TDI 4motion with diesel straight-4 2.0 L 181 HP at 3500 RPM, 380 N⋅m at 1750 RPM engine (2015.5–) | Component must not be knocked down. |
First stage | 4.43 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. |
M7 | 9.59 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | Tighten by hand |
Bolts must be replaced. See figure 7. | |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 14.75 lbf⋅ft |
Fifth stage | 90° |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Use new seal and screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Balance shaft timing chain guide rail | 14.75 lbf⋅ft |
Balance shaft timing chain tension rail | 14.75 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 45° |
First stage | 2.95 lbf⋅ft |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 45° |
Bearing pedestal at the cylinder head | 6.64 lbf⋅ft |
Camshaft adjuster valve | 6.64 lbf⋅ft |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Bearing casing | 6.64 lbf⋅ft |
Cap | 6.64 lbf⋅ft |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
Top | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Bottom | 14.75 lbf⋅ft |
Camshaft timing chain slip rail | 14.75 lbf⋅ft |
Camshaft timing chain tensioner | 6.64 lbf⋅ft |
Camshaft timing chain tensioning rail | 14.75 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
Central camshaft screws | 73.76 lbf⋅ft |
Screws must be replaced. | |
Otherwise | 6.64 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
Chain tensioner | 6.64 lbf⋅ft |
2.0 TSI 4motion with gasoline straight-4 2.0 L 177 HP at 4500 RPM, 280 N⋅m at 1700 RPM engine (2011.5–) | 14.75 lbf⋅ft |
Control drive chain tensioner | 6.64 lbf⋅ft |
Control drive chain tensioning rail | 14.75 lbf⋅ft |
Control drive timing chain slip rail | 14.75 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 121 HP at 5500 RPM, 200 N⋅m at 1500 RPM engine (2010.8–) | 7.38 lbf⋅ft |
Drive chain balance shaft tensioner | 62.69 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZD engines | 25.81 lbf⋅ft |
Left-hand thread |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. Left-hand thread. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Replace screw and intermediate wheel when loosening the screw. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
The screws and sprocket wheel must be replaced. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
The screws and sprocket wheel must be replaced. | |
Second stage | Turn sprocket wheel for freedom from play |
First step | 22.13 lbf⋅ft |
Second step | 90° |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 6.64 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 6.64 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 6.64 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1800 RPM engine (2007.9–) | 6.64 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP engine (2007.9–) | 6.64 lbf⋅ft |
2.0 TSI 4motion with gasoline straight-4 2.0 L 177 HP at 4500 RPM, 280 N⋅m at 1700 RPM engine (2011.5–) | 6.64 lbf⋅ft |
2.0 TSI 4motion with gasoline straight-4 2.0 L 208 HP at 5300 RPM, 280 N⋅m at 1700 RPM engine (2011.5–) | 6.64 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Tension rail bearing screws | 14.75 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
Toothed belt guard | 6.64–7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Nuts must be replaced. | |
Second stage | 45° |
Top part of control unit housing | 6.64 lbf⋅ft |
Tighten cross-wise. |
1.4 TSI with gasoline straight-4 1.4 L 121 HP at 5500 RPM, 200 N⋅m at 1500 RPM engine (2010.8–) | 5.9 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 174 HP engine (2012.11–) | 8.11 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 181 HP at 3500 RPM, 380 N⋅m at 1750 RPM engine (2015.5–) | Component must not be knocked down. |
2.0 TDI with diesel straight-4 2.0 L 109 HP at 2750 RPM, 280 N⋅m at 1750 RPM engine (2010.5–) | 8.11 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 11.06 lbf⋅ft |
2.0 TSI 4motion with gasoline straight-4 2.0 L 177 HP at 4500 RPM, 280 N⋅m at 1700 RPM engine (2011.5–) | 11.06 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Oil drain plug | 22.13 lbf⋅ft |
Sealing rings must be replaced. |
All Volkswagen gasoline straight-4 2.0 Liters CAWA engines | 16.23 lbf⋅ft |
Slightly oil sealing lips. | |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZC engines | 16.23 lbf⋅ft |
Slightly oil sealing lips. | |
All Volkswagen gasoline straight-4 2.0 Liters CCZD engines | 14.75 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
Replace the O ring. | |
Oil filter drain plug | 3.69 lbf⋅ft |
Replace the O ring. |
All other modifications | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Tighten screws crosswise. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Tighten screws crosswise. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Tighten alternately starting from the top left | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Oil pressure sensor | 14.75 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Second stage | 90° |
First stage | 8.85 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
All other modifications | 6.64–7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
At the gearbox | 33.19 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
At the gearbox | 33.19 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
First stage | 3.69 lbf⋅ft |
Second stage | 29.5 lbf⋅ft |
At the gearbox | |
Third stage | 9.59 lbf⋅ft |
Tighten screws crosswise. |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
Tighten the screws crosswise. |
Camshaft sensor | 7.38 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUWA engines | 6.64 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1800 RPM engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP engine (2007.9–) | 7.38 lbf⋅ft |
2.0 TSI 4motion with gasoline straight-4 2.0 L 177 HP at 4500 RPM, 280 N⋅m at 1700 RPM engine (2011.5–) | 7.38 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CBAA engines | 33.19 lbf⋅ft |
Use hot screw paste |
On exhaust manifold | 33.19 lbf⋅ft |
Use hot screw paste | |
On particle filter | 44.25 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFFD engines | 44.25 lbf⋅ft |
Use hot screw paste | |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 44.25 lbf⋅ft |
Use hot screw paste | |
All Volkswagen diesel straight-4 2.0 Liters CUWA engines | 33.19 lbf⋅ft |
Use hot screw paste | |
All Volkswagen diesel straight-4 2.0 Liters CBAB engines | 33.19 lbf⋅ft |
Use hot screw paste |
On exhaust manifold | 33.19 lbf⋅ft |
Use hot screw paste | |
On particle filter | 44.25 lbf⋅ft |
With combustion chamber pressure sensor | 8.85 lbf⋅ft |
Without combustion chamber pressure sensor | 12.54 lbf⋅ft |
All other modifications | 13.28 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 40.57 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 40.57 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 40.57 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1800 RPM engine (2007.9–) | 40.57 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP engine (2007.9–) | 40.57 lbf⋅ft |
2.0 TSI 4motion with gasoline straight-4 2.0 L 177 HP at 4500 RPM, 280 N⋅m at 1700 RPM engine (2011.5–) | 40.57 lbf⋅ft |
Use hot screw paste | |
All other modifications | 36.88 lbf⋅ft |
Use hot screw paste |
NOx sensor | 38.35 lbf⋅ft |
Use hot screw paste |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 73.76 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2007.9–) | 5.16 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2007.9–) | 5.16 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 138 HP engine (2007.9–) | 5.16 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2008.3–) | 5.16 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 138 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2008.3–) | 5.16 lbf⋅ft |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 29.5 lbf⋅ft |
Nuts must be replaced. | |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 168 HP at 4300 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 29.5 lbf⋅ft |
Nuts must be replaced. | |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1700 RPM engine (2007.9–) | 29.5 lbf⋅ft |
Nuts must be replaced. | |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1800 RPM engine (2007.9–) | 29.5 lbf⋅ft |
Nuts must be replaced. | |
2.0 TFSI 4motion with gasoline straight-4 2.0 L 197 HP engine (2007.9–) | 29.5 lbf⋅ft |
Nuts must be replaced. | |
All other modifications | 16.96 lbf⋅ft |
Nuts must be replaced. |
Catalytic converter bracket | 18.44 lbf⋅ft |
Clamps | 5.16 lbf⋅ft |
Parts must be replaced. | |
Retaining clamp | 18.44 lbf⋅ft |
Differential pressure sensor lines | 33.19 lbf⋅ft |
Use hot screw paste |
All Volkswagen diesel straight-4 2.0 Liters CBAA engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CBAB engines | 14.75 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2007.9–) | 14.75 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2007.9–) | 14.75 lbf⋅ft |
First stage | 8.11 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. | |
Second stage | 16.23 lbf⋅ft |
Third stage | 16.23 lbf⋅ft |
Control tensioner |
All Volkswagen diesel straight-4 2.0 Liters CBAB engines | 14.75 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace the nuts and use fitting paste | |
Second stage | 8.85 lbf⋅ft |
Tighten cross-wise. | |
Third stage | 11.8 lbf⋅ft |
Fourth stage | 18.44 lbf⋅ft |
Bottom | 22.13 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Nuts must be replaced. See figure 14. | |
Second stage | 8.85 lbf⋅ft |
Third stage | 11.8 lbf⋅ft |
Fourth stage | 18.44 lbf⋅ft |
Bottom | 22.13 lbf⋅ft |
Nuts must be replaced. |
All other modifications | 18.44 lbf⋅ft |
Tighten new nuts evenly in several steps. |
All Volkswagen gasoline straight-4 1.4 Liters CAXA engines | 7.38 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CBAA engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFFA engines | 17.7 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZD engines | 7.38 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFFD engines | 11.06 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 11.06 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CUWA engines | 11.06 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CBAB engines | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFFB engines | 17.7 lbf⋅ft |
Exhaust pipe | 18.44 lbf⋅ft |
Seals and nuts must be replaced. |
2.0 TDI 4motion with diesel straight-4 2.0 L 148 HP at 3500 RPM, 340 N⋅m at 1750 RPM engine (2015.5–) | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Exhaust pipe rear | 18.44 lbf⋅ft |
Particle filter bracket | 18.44 lbf⋅ft |
Particulate filter heat protection plate | 7.38 lbf⋅ft |
Fuel filter bracket | 7.38 lbf⋅ft |
Fuel filter cover | 3.69 lbf⋅ft |
Otherwise | 7.38 lbf⋅ft |
Fuel pump | 81.13 lbf⋅ft |
Spark plugs | 18.44 lbf⋅ft |
1.4 TSI 4motion with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2007.9–) | 55.32 lbf⋅ft |
1.4 TSI 4motion with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2007.9–) | 55.32 lbf⋅ft |
1.4 TSI 4motion with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2007.9–) | 55.32 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 121 HP at 5500 RPM, 200 N⋅m at 1500 RPM engine (2010.8–) | 55.32 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2008.5–) | 55.32 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2008.5–) | 55.32 lbf⋅ft |
1.4 TSI with gasoline straight-4 1.4 L 148 HP at 5800 RPM, 240 N⋅m at 1750 RPM engine (2008.5–) | 55.32 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 134 HP at 4000 RPM, 320 N⋅m at 1750 RPM engine (2007.11–) | 55.32 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 148 HP at 3500 RPM, 340 N⋅m at 1750 RPM engine (2015.5–) | 59 lbf⋅ft |
2.0 TDI 4motion with diesel straight-4 2.0 L 174 HP engine (2012.11–) | 55.32 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 109 HP at 2750 RPM, 280 N⋅m at 1750 RPM engine (2010.5–) | 55.32 lbf⋅ft |
2.0 TSI 4motion with gasoline straight-4 2.0 L 177 HP at 4500 RPM, 280 N⋅m at 1700 RPM engine (2011.5–) | 55.32 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 59 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2022 Volkswagen Tiguan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Tiguan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2022 Volkswagen Tiguan you're not only saving money, but also also improving your technical skills and learning something new.