2011 Volkswagen Passat Variant Wagon B6 Rear Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Rear axle bleeder valve | 7.38 lbf⋅ft |
| Rear axle brake caliper | 25.81 lbf⋅ft |
| Screws must be replaced. | |
| First stage | 66.38 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 90° |
| Rear axle brake disc | 2.95 lbf⋅ft |
| First stage | 66.38 lbf⋅ft |
| Screws and nuts must be replaced. | |
| Second stage | 90° |
| First stage | 95.88 lbf⋅ft |
| Screws and nuts must be replaced. | |
| Second stage | 90° |
| First stage | 36.88 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 45° |
| On stub axle | 132.76 lbf⋅ft |
| Screws must be replaced. | |
| Rear axle shock absorber piston rod | 18.44 lbf⋅ft |
| Nuts must be replaced. | |
| First stage | 44.25 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 90° |
| First stage | 66.38 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 90° |
| M8 | 29.5 lbf⋅ft |
| Screws must be replaced. | |
| M10 | 51.63 lbf⋅ft |
| Screws must be replaced. | |
| First stage | 147.51 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 180° |
| First stage | 51.63 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 90° |
| First stage | 147.51 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 180° |
| First stage | 66.38 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 90° |
| First stage | 36.88 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 45° |
| First stage | 66.38 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 45° |
| First stage | 18.44 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 45° |
| Rear axle stabilizer support at the axle control arm | 33.19 lbf⋅ft |
| Nuts must be replaced. | |
| Rear axle stabilizer support at the stabilizer | 33.19 lbf⋅ft |
| Nuts must be replaced. | |
| Rear axle stabilizer support at the stub axle | 29.5 lbf⋅ft |
| Replace nut. | |
| At the axle support | 70.07 lbf⋅ft |
| Nuts must be replaced. | |
| First stage | 95.88 lbf⋅ft |
| Screws and nuts must be replaced. | |
| Second stage | 90° |
| At the axle support | 70.07 lbf⋅ft |
| Nuts must be replaced. | |
| First stage | 66.38 lbf⋅ft |
| Screws and nuts must be replaced. | |
| Second stage | 90° |
| First stage | 147.51 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 180° |
| First stage | 51.63 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 90° |
| First stage | 51.63 lbf⋅ft |
| Screws must be replaced. | |
| Second stage | 90° |
| Tire pressure sensors | 2.95 lbf⋅ft |
| Replace the screw. | |
| Wheel attachment | 88.51 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2011 Volkswagen Passat Variant Wagon user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Passat Variant Wagon service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2011 Volkswagen Passat Variant Wagon you're not only saving money, but also also improving your technical skills and learning something new.
2011 Volkswagen Passat Variant Wagon generations
In 2011 Volkswagen offered 4 generations of the Passat Variant Wagon. Rear suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.