in your garage to make future searches easy.

Condition Value
expand_moreAir intake system
expand_moreIntake manifold
At the cylinder head 5.9 lbf⋅ft
Upper section of intake manifold 7.38 lbf⋅ft
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 14.75 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 14.75 lbf⋅ft
All other modifications 5.9 lbf⋅ft
expand_moreAuxiliary assemblies
expand_moreAuxiliary drive belt deflection pulley
3.6 FSI 4motion with gasoline vr-6 3.6 L 295 HP at 6600 RPM, 350 N⋅m at 2400 RPM engine (2011.11–) 29.5 lbf⋅ft
expand_moreAuxiliary drive belt tensioner
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 36.88 lbf⋅ft
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines 7.38 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines 7.38 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines 7.38 lbf⋅ft
expand_moreM10
First stage 29.5 lbf⋅ft
Screws must be replaced.
Second stage 90°
M8 16.96 lbf⋅ft
expand_moreAll other modifications
expand_moreWith automatic tensioner
First stage 14.75 lbf⋅ft
Screws must be replaced.
Second stage 180°
expand_moreWith mechanical tensioning device
First stage 22.13 lbf⋅ft
Second stage 90°
expand_moreAuxiliary drive belt tensioner
expand_moreWith mechanical tension wheel
First stage Screw in screw(s) until the stop.
Screws must be replaced.
Second stage 90° detach.
expand_moreThird stage
First step 22.13 lbf⋅ft
Second step 90°
Air-conditioning compressor 18.44 lbf⋅ft
expand_moreAir-conditioning compressor bracket
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 16.96 lbf⋅ft
First stage 14.75 lbf⋅ft
Screws must be replaced.
Second stage 90°
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 18.44 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 18.44 lbf⋅ft
expand_moreAll other modifications
expand_moreM10 × 30 screws
First stage 29.5 lbf⋅ft
Screws must be replaced.
Second stage 45°
expand_moreM10 × 52 screws
First stage 29.5 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreM10 × 60 screws
First stage 29.5 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreAlternator
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines 16.96 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines 16.96 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines 16.96 lbf⋅ft
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 16.96 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 16.96 lbf⋅ft
All other modifications 14.75 lbf⋅ft
expand_moreAlternator pulley
With freewheel 59 lbf⋅ft
Without freewheel 47.94 lbf⋅ft
expand_moreGenerator bracket
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 16.96 lbf⋅ft
First stage 14.75 lbf⋅ft
Screws must be replaced.
Second stage 90°
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 18.44 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 18.44 lbf⋅ft
expand_moreAll other modifications
expand_moreM10 × 30 screws
First stage 29.5 lbf⋅ft
Screws must be replaced.
Second stage 45°
expand_moreM10 × 52 screws
First stage 29.5 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreM10 × 60 screws
First stage 29.5 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreVacuum pump
First stage 5.9 lbf⋅ft
Screws must be replaced.
Second stage 180°
All other modifications 7.38 lbf⋅ft
expand_moreCarburetion
Exhaust gas return cooler 6.64 lbf⋅ft
Exhaust gas return valve 6.64 lbf⋅ft
Exhaust recirculation pipe 6.64 lbf⋅ft
expand_moreFuel-distributing pipe
First stage 22.13 lbf⋅ft
Screws must be replaced.
Second stage 90°
All other modifications 14.7516.23 lbf⋅ft
expand_moreHigh-pressure line
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines 13.28 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines 13.28 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines 13.28 lbf⋅ft
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 13.28 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 13.28 lbf⋅ft
All other modifications 20.65 lbf⋅ft
expand_moreHigh-pressure pump
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 7.38 lbf⋅ft
expand_moreM6
First stage 5.9 lbf⋅ft
Screws must be replaced.
Second stage 90°
M8 14.75 lbf⋅ft
Screws must be replaced.
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 14.75 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 14.75 lbf⋅ft
expand_moreAll other modifications
expand_moreM8 × 28 screws
First stage 14.75 lbf⋅ft
Screws must be replaced.
Second stage 45°
expand_moreM8 × 90 screws
First stage 14.75 lbf⋅ft
Screws must be replaced.
Second stage 180°
expand_moreHigh-pressure pump pulley
Central nuts 70.07 lbf⋅ft
Wheel 14.75 lbf⋅ft
Screws must be replaced.
Injection hoses 20.65 lbf⋅ft
expand_moreInjection nozzle (injector)
First stage 5.9 lbf⋅ft
Screws must be replaced.
Second stage 180°
Pressure tube connection 29.5 lbf⋅ft
expand_moreCharging
Charge air pipes 6.64 lbf⋅ft
Charge air compressor 18.44 lbf⋅ft
expand_morePulley for charge-air compressor
First stage 29.5 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreTurbo charger
expand_moreAt the cylinder head
Lower nuts 22.13 lbf⋅ft
Nuts must be replaced. Use hot screw paste.
Upper nuts 18.44 lbf⋅ft
Nuts must be replaced. Use hot screw paste.
expand_moreTurbocharger bracket
At the turbocharger 16.96 lbf⋅ft
Turbocharger coolant feed line 5.9 lbf⋅ft
Turbocharger coolant return line 5.9 lbf⋅ft
expand_moreTurbocharger oil feed line
At the turbocharger 16.2319.91 lbf⋅ft
Fill oil into turbocharger via oil feed line pipe connection.
On the engine block 22.13 lbf⋅ft
At the turbocharger 22.13 lbf⋅ft
On the engine block 14.75 lbf⋅ft
expand_moreTurbocharger oil return line
All Volkswagen diesel straight-4 2.0 Liters CFGC engines 12.54 lbf⋅ft
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 5.9 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 5.9 lbf⋅ft
expand_moreCooling system
expand_moreCoolant pump
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 5.9 lbf⋅ft
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines 6.64 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines 6.64 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines 6.64 lbf⋅ft
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 5.9 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 5.9 lbf⋅ft
All other modifications 11.06 lbf⋅ft
expand_moreCoolant pump pulley
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 14.75 lbf⋅ft
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 17.7 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 17.7 lbf⋅ft
expand_moreCoolant thermostat housing
All Volkswagen diesel straight-4 2.0 Liters CFGC engines 11.06 lbf⋅ft
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 3.69 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 3.69 lbf⋅ft
expand_moreCoolant pump drive wheel
First stage 7.38 lbf⋅ft
Use new screw. (left-hand thread)
Second stage 90°
expand_moreFan wheel
All Volkswagen diesel straight-4 2.0 Liters CFGC engines 3.69 lbf⋅ft
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 7.38 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 7.38 lbf⋅ft
expand_moreCylinder head
expand_moreCamshaft bearing
expand_moreBearing cap
First stage 3.69 lbf⋅ft
Tighten in steps from inside to outside.
Second stage 45°
First stage 5.9 lbf⋅ft
Tighten new screws in inside-to-outside order.
Second stage 90°
All other modifications 7.38 lbf⋅ft
Tighten screws evenly.
expand_moreCylinder head screws
Figure 1. Cylinder head, Cylinder head screws, Volkswagen gasoline vr-6 3.6 Liters BWS.
Figure 1. Cylinder head, Cylinder head screws, Volkswagen gasoline vr-6 3.6 Liters BWS.
First stage 11.06 lbf⋅ft
Screws must be replaced. See figure 1.
Second stage 22.13 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_moreScrews 1 – 10
Figure 2. Cylinder head, Cylinder head screws, Volkswagen gasoline straight-4 1.8 Liters CDAB, Screws 1 – 10.
Figure 2. Cylinder head, Cylinder head screws, Volkswagen gasoline straight-4 1.8 Liters CDAB, Screws 1 – 10.
First stage 29.5 lbf⋅ft
Screws must be replaced. See figure 2.
Second stage 90°
Third stage 90°
expand_moreScrews 11 – 14
expand_moreFourth stage
First step 5.9 lbf⋅ft
Screws must be replaced.
Second step 90°
Figure 3. Cylinder head, Cylinder head screws, Volkswagen flexfuel straight-4 1.4 Liters CKMA.
Figure 3. Cylinder head, Cylinder head screws, Volkswagen flexfuel straight-4 1.4 Liters CKMA.
First stage 22.13 lbf⋅ft
Screws must be replaced. See figure 3.
Second stage 90°
Third stage 90°
expand_moreAll other modifications
First stage 22.13 lbf⋅ft
Screws must be replaced. See figure 3.
Second stage 36.88 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_moreValve cover
expand_moreBearing casing
First stage 7.38 lbf⋅ft
Tighten new screws in inside-to-outside order.
Second stage 90°
All other modifications 7.38 lbf⋅ft
Tighten the screws cross-wise from inside to outside.
Valve cover locking screws 3.69 lbf⋅ft
expand_moreEngine block
expand_moreBalance shaft gear wheel
M6 6.64 lbf⋅ft
expand_moreAll other modifications
First stage 14.75 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreBalance shaft module
expand_moreM7
First stage 9.59 lbf⋅ft
Second stage 90°
expand_moreM8
First stage 14.75 lbf⋅ft
Second stage 90°
expand_moreConnecting rod bearing
First stage 29.5 lbf⋅ft
Screws must be replaced.
Second stage 90°
First stage 33.19 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreM7
First stage 14.75 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreM8
First stage 22.13 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreAll other modifications
First stage 22.13 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreCrankshaft central screws
First stage 110.63 lbf⋅ft
Screws must be replaced.
Second stage 90°
First stage 110.63 lbf⋅ft
Screws must be replaced.
Second stage 180°
expand_moreAll other modifications
First stage 88.51 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreCrankshaft pulley
First stage 7.38 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreDrive plate
First stage 44.25 lbf⋅ft
Screws must be replaced.
Second stage 90°
Engine block closure screws 22.13 lbf⋅ft
expand_moreFlywheel
First stage 44.25 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreMain bearing
First stage 22.13 lbf⋅ft
Screws must be replaced.
Second stage 180°
First stage Screw in screw(s) by hand.
M10 and M8 screws. Tighten new screws in inside-to-outside order.
expand_moreSecond stage
First step 47.94 lbf⋅ft
M10 screws
Second step 90°
M10 screws
expand_moreThird stage
First step 14.75 lbf⋅ft
M8 screws
Second step 90°
M8 screws
First stage 36.88 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreAll other modifications
expand_moreBalance shaft module
expand_moreFirst stage
Figure 4. Engine block, Main bearing, All other modifications, Balance shaft module, First stage.
Figure 4. Engine block, Main bearing, All other modifications, Balance shaft module, First stage.
8-screws variant 4.43 lbf⋅ft
Screws must be replaced. See figure 4.
Figure 5. Engine block, Main bearing, All other modifications, Balance shaft module, First stage.
Figure 5. Engine block, Main bearing, All other modifications, Balance shaft module, First stage.
6-screws variant 4.43 lbf⋅ft
Screws must be replaced. See figure 5.
Second stage 9.59 lbf⋅ft
M7 screws
expand_moreThird stage
M8 screws 14.75 lbf⋅ft
Other screws 90°
expand_moreBearing cap
First stage 47.94 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreVibration damper
First stage 44.25 lbf⋅ft
Screws must be replaced.
Second stage 180°
First stage 110.63 lbf⋅ft
Use new seal and screws.
Second stage 90°
expand_moreAll other modifications
First stage 7.38 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreEngine control
Balance shaft timing chain guide rail 14.75 lbf⋅ft
Balance shaft timing chain tension rail 14.75 lbf⋅ft
expand_moreBottom part of the control unit housing
M6 7.38 lbf⋅ft
M8 16.96 lbf⋅ft
Figure 6. Engine control, Bottom part of the control unit housing.
Figure 6. Engine control, Bottom part of the control unit housing.
First stage 5.9 lbf⋅ft
Use new screws and tighten them crosswise.
Second stage 45°
expand_moreCamshaft adjuster
expand_moreAt the cylinder head
First stage 5.9 lbf⋅ft
Screws must be replaced.
Second stage 180°
expand_moreBearing pedestal
At the cylinder head 6.64 lbf⋅ft
Camshaft adjuster valve 6.64 lbf⋅ft
expand_moreInlet camshaft
Central screws 25.81 lbf⋅ft
Left-hand thread
expand_moreOutlet camshaft
expand_moreM6
expand_moreCentral screws
First stage 5.9 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreM8
expand_moreCentral screws
First stage 14.75 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreBearing pedestal
At the cylinder head 6.64 lbf⋅ft
Camshaft adjuster valve 6.64 lbf⋅ft
expand_moreInlet camshaft
expand_moreM6
expand_moreCentral screws
First stage 5.9 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreM8
expand_moreCentral screws
First stage 14.75 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreOutlet camshaft
Central screws 25.81 lbf⋅ft
Left-hand thread
expand_moreCamshaft drive belt deflection pulley
M8 14.75 lbf⋅ft
expand_moreM10
First stage 36.88 lbf⋅ft
Screws must be replaced.
Second stage 90°
Camshaft timing chain guide rail 14.75 lbf⋅ft
expand_moreCamshaft timing chain slip rail
M8 7.38 lbf⋅ft
M10 16.96 lbf⋅ft
All other modifications 14.75 lbf⋅ft
expand_moreCamshaft timing chain tensioner
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 36.88 lbf⋅ft
All other modifications 6.64 lbf⋅ft
Camshaft timing chain tensioning rail 14.75 lbf⋅ft
expand_moreCamshaft timing gear
Central screws 73.76 lbf⋅ft
expand_moreWheel
First stage 14.75 lbf⋅ft
Second stage 45°
Chain tensioner 6.64 lbf⋅ft
Control drive chain tensioner 5.9 lbf⋅ft
expand_moreControl drive sprocket wheel
First stage 44.25 lbf⋅ft
Second stage 90°
Control drive timing chain slip rail 7.38 lbf⋅ft
Drive chain balance shaft tensioner 62.69 lbf⋅ft
expand_moreInlet camshaft wheel
First stage 44.25 lbf⋅ft
Screws must be replaced.
Second stage 90°
First stage 29.5 lbf⋅ft
Screws must be replaced. Left-hand thread.
Second stage 90°
All other modifications 25.81 lbf⋅ft
Screws must be replaced. Left-hand thread.
expand_moreIntermediate shaft chain sprocket
First stage 7.38 lbf⋅ft
Replace screw and intermediate wheel when loosening the screw.
Second stage for freedom from play
expand_moreThird stage
First step 22.13 lbf⋅ft
Second step 90°
expand_moreAll other modifications
First stage 66.38 lbf⋅ft
Replace screw and intermediate wheel when loosening the screw.
Second stage 90°
expand_moreOil pump drive chain tensioner
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 11.06 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 11.06 lbf⋅ft
All other modifications 6.64 lbf⋅ft
expand_moreOutlet camshaft wheel
First stage 44.25 lbf⋅ft
Screws must be replaced.
Second stage 90°
First stage 36.88 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreAll other modifications
expand_moreM6
First stage 5.9 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreM8
First stage 14.75 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreTension rail bearing screws
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 7.38 lbf⋅ft
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 14.75 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 14.75 lbf⋅ft
expand_moreTiming case cover
M6 7.38 lbf⋅ft
M10 36.88 lbf⋅ft
Toothed belt guard 7.38 lbf⋅ft
Toothed belt guard at the bottom 7.38 lbf⋅ft
Screws must be replaced.
Toothed belt guard at the top 7.38 lbf⋅ft
Screws must be replaced.
Toothed belt guard center 7.38 lbf⋅ft
Screws must be replaced.
expand_moreToothed belt tensioning roller
First stage 14.75 lbf⋅ft
Second stage 45°
expand_moreTop part of control unit housing
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 5.9 lbf⋅ft
Gradually tighten screws crosswise.
Figure 7. Engine control, Top part of control unit housing.
Figure 7. Engine control, Top part of control unit housing.
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines 6.64 lbf⋅ft
Tighten cross-wise. See figure 7.
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines 6.64 lbf⋅ft
Tighten cross-wise. See figure 7.
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines 6.64 lbf⋅ft
Tighten cross-wise. See figure 7.
expand_moreEngine lubrication
expand_moreOil cooler
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 5.9 lbf⋅ft
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines 11.06 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines 11.06 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines 11.06 lbf⋅ft
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 5.9 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 5.9 lbf⋅ft
All other modifications 8.11 lbf⋅ft
Oil drain plug 22.13 lbf⋅ft
Screws must be replaced.
expand_moreOil filter
Oil filter cover 18.44 lbf⋅ft
Slightly oil sealing lips.
expand_moreOil filter housing
Oil filter cover 18.44 lbf⋅ft
Oil filter drain plug 7.38 lbf⋅ft
On the engine block 16.96 lbf⋅ft
First stage 10.33 lbf⋅ft
Bolts must be replaced.
Second stage 90°
expand_moreAll other modifications
Oil filter cover 18.44 lbf⋅ft
expand_moreOn the engine block
First stage 10.33 lbf⋅ft
Use new screws and tighten them crosswise.
Second stage 90°
Oil pressure sensor 14.75 lbf⋅ft
expand_moreOil pump
M6 screws 6.64 lbf⋅ft
M8 screws 14.75 lbf⋅ft
First stage 10.33 lbf⋅ft
Screws must be replaced.
Second stage 90°
All other modifications 6.64 lbf⋅ft
expand_moreOil pump chain wheel
First stage 44.25 lbf⋅ft
Screws must be replaced.
Second stage 90°
First stage 14.75 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreOil sump
At the gearbox 33.19 lbf⋅ft
On the engine block 7.38 lbf⋅ft
Figure 8. Engine lubrication, Oil sump, Volkswagen gasoline straight-4 1.8 Liters CDAB.
Figure 8. Engine lubrication, Oil sump, Volkswagen gasoline straight-4 1.8 Liters CDAB.
expand_moreOil sump lower part
See figure 8.
First stage 5.9 lbf⋅ft
Screws must be replaced.
Second stage 45°
Figure 9. Engine lubrication, Oil sump, Volkswagen gasoline straight-4 1.8 Liters CDAB.
Figure 9. Engine lubrication, Oil sump, Volkswagen gasoline straight-4 1.8 Liters CDAB.
expand_moreOil sump top part
See figure 9.
First stage 11.06 lbf⋅ft
Screws must be replaced.
Second stage 90°
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 9.59 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 9.59 lbf⋅ft
expand_moreAll other modifications
At the gearbox 29.5 lbf⋅ft
On the engine block 11.06 lbf⋅ft
expand_moreEngine management
Camshaft sensor 7.38 lbf⋅ft
expand_moreCharge air pressure sensor
All Volkswagen diesel straight-4 2.0 Liters CFGC engines 3.69 lbf⋅ft
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 7.38 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 7.38 lbf⋅ft
expand_moreCrankshaft sensor
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 7.38 lbf⋅ft
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines 7.38 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines 7.38 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines 7.38 lbf⋅ft
All other modifications 3.69 lbf⋅ft
Exhaust gas temperature sensor 44.25 lbf⋅ft
Glow plugs 13.28 lbf⋅ft
Knock sensor 14.75 lbf⋅ft
expand_moreLambda sensor
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines 40.57 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines 40.57 lbf⋅ft
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines 40.57 lbf⋅ft
All other modifications 36.88 lbf⋅ft
expand_moreEngine mounting
expand_moreEngine bracket
expand_moreOn the engine block
First stage 29.5 lbf⋅ft
Screws must be replaced.
Second stage 180°
expand_moreEngine mounting
expand_moreOn chassis
First stage 29.5 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreOn engine bracket
First stage 44.25 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreStrut
First stage 14.75 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreSubframe
expand_moreM12 × 100 screws
First stage 51.63 lbf⋅ft
Screws must be replaced.
Second stage 180°
expand_moreM12 × 110 screws
First stage 51.63 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreM12 × 90 screws
First stage 51.63 lbf⋅ft
Screws must be replaced.
Second stage 180°
expand_moreTorque arm
expand_moreAt the subframe
expand_moreM14
First stage 73.76 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreAt the gearbox
expand_moreM10
First stage 36.88 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreM12
First stage 44.25 lbf⋅ft
Screws must be replaced.
Second stage 90°
expand_moreExhaust system
expand_moreCatalytic converter
M10 29.5 lbf⋅ft
Nuts must be replaced.
M8 18.44 lbf⋅ft
Nuts must be replaced.
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 16.96 lbf⋅ft
Nuts must be replaced.
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 16.96 lbf⋅ft
Nuts must be replaced.
All other modifications 29.5 lbf⋅ft
Nuts must be replaced. Use hot screw paste.
expand_moreCatalytic converter bracket
On catalytic converter 18.44 lbf⋅ft
On the engine block 7.38 lbf⋅ft
Diesel particulate filter 5.16 lbf⋅ft
Differential pressure sensor lines 33.19 lbf⋅ft
Use hot screw paste
Exhaust manifold 18.44 lbf⋅ft
Replace the nuts and tighten alternately
expand_moreExhaust manifold heat shields
All Volkswagen diesel straight-4 2.0 Liters CFGC engines 5.16 lbf⋅ft
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines 7.38 lbf⋅ft
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines 7.38 lbf⋅ft
expand_moreExhaust pipe
Clamps 25.81 lbf⋅ft
expand_moreExhaust pipe bracket
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 14.75 lbf⋅ft
expand_moreOn chassis on the rear side
First stage 66.38 lbf⋅ft
Screws must be replaced.
Second stage 90°
Otherwise 18.44 lbf⋅ft
All other modifications 18.44 lbf⋅ft
Nuts must be replaced.
expand_moreExhaust pipe rear
Clamps 18.44 lbf⋅ft
expand_moreFuel supply
Fuel filter housing 7.38 lbf⋅ft
expand_moreIgnition system
expand_moreSpark plugs
All Volkswagen gasoline vr-6 3.6 Liters BWS engines 13.28 lbf⋅ft
All other modifications 18.44 lbf⋅ft
expand_moreStart system
expand_moreStarter
M10 29.5 lbf⋅ft
M12 55.32 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 Volkswagen CC user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen CC service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2016 Volkswagen CC you're not only saving money, but also also improving your technical skills and learning something new.

Volkswagen CC First generation facelift model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat