2014 Volkswagen CC First generation facelift Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
At the cylinder head | 5.9 lbf⋅ft |
Upper section of intake manifold | 7.38 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 14.75 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
3.6 FSI 4motion with gasoline vr-6 3.6 L 295 HP at 6600 RPM, 350 N⋅m at 2400 RPM engine (2011.11–) | 29.5 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 36.88 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 7.38 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
M8 | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 22.13 lbf⋅ft |
Second stage | 90° |
First stage | Screw in screw(s) until the stop. |
Screws must be replaced. | |
Second stage | 90° detach. |
First step | 22.13 lbf⋅ft |
Second step | 90° |
Air-conditioning compressor | 18.44 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 16.96 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 16.96 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 16.96 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
With freewheel | 59 lbf⋅ft |
Without freewheel | 47.94 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
All other modifications | 7.38 lbf⋅ft |
Exhaust gas return cooler | 6.64 lbf⋅ft |
Exhaust gas return valve | 6.64 lbf⋅ft |
Exhaust recirculation pipe | 6.64 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All other modifications | 14.75–16.23 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 13.28 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 13.28 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 13.28 lbf⋅ft |
All other modifications | 20.65 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 7.38 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
Screws must be replaced. |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 14.75 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Central nuts | 70.07 lbf⋅ft |
Wheel | 14.75 lbf⋅ft |
Screws must be replaced. |
Injection hoses | 20.65 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
Pressure tube connection | 29.5 lbf⋅ft |
Charge air pipes | 6.64 lbf⋅ft |
Charge air compressor | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Lower nuts | 22.13 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. | |
Upper nuts | 18.44 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. |
At the turbocharger | 16.96 lbf⋅ft |
Turbocharger coolant feed line | 5.9 lbf⋅ft |
Turbocharger coolant return line | 5.9 lbf⋅ft |
At the turbocharger | 16.23–19.91 lbf⋅ft |
Fill oil into turbocharger via oil feed line pipe connection. | |
On the engine block | 22.13 lbf⋅ft |
At the turbocharger | 22.13 lbf⋅ft |
On the engine block | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 12.54 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 5.9 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 6.64 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 5.9 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 14.75 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 17.7 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 17.7 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 11.06 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 3.69 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 3.69 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Use new screw. (left-hand thread) | |
Second stage | 90° |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 3.69 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 7.38 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Tighten in steps from inside to outside. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Tighten screws evenly. |
First stage | 11.06 lbf⋅ft |
Screws must be replaced. See figure 1. | |
Second stage | 22.13 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. See figure 2. | |
Second stage | 90° |
Third stage | 90° |
First step | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second step | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. See figure 3. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
Valve cover locking screws | 3.69 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 9.59 lbf⋅ft |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 88.51 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Engine block closure screws | 22.13 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | Screw in screw(s) by hand. |
M10 and M8 screws. Tighten new screws in inside-to-outside order. |
First step | 47.94 lbf⋅ft |
M10 screws | |
Second step | 90° |
M10 screws |
First step | 14.75 lbf⋅ft |
M8 screws | |
Second step | 90° |
M8 screws |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Second stage | 9.59 lbf⋅ft |
M7 screws |
M8 screws | 14.75 lbf⋅ft |
Other screws | 90° |
First stage | 47.94 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 110.63 lbf⋅ft |
Use new seal and screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Balance shaft timing chain guide rail | 14.75 lbf⋅ft |
Balance shaft timing chain tension rail | 14.75 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
At the cylinder head | 6.64 lbf⋅ft |
Camshaft adjuster valve | 6.64 lbf⋅ft |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
At the cylinder head | 6.64 lbf⋅ft |
Camshaft adjuster valve | 6.64 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
M8 | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Camshaft timing chain guide rail | 14.75 lbf⋅ft |
M8 | 7.38 lbf⋅ft |
M10 | 16.96 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 36.88 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Camshaft timing chain tensioning rail | 14.75 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
Chain tensioner | 6.64 lbf⋅ft |
Control drive chain tensioner | 5.9 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Second stage | 90° |
Control drive timing chain slip rail | 7.38 lbf⋅ft |
Drive chain balance shaft tensioner | 62.69 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. Left-hand thread. | |
Second stage | 90° |
All other modifications | 25.81 lbf⋅ft |
Screws must be replaced. Left-hand thread. |
First stage | 7.38 lbf⋅ft |
Replace screw and intermediate wheel when loosening the screw. | |
Second stage | for freedom from play |
First step | 22.13 lbf⋅ft |
Second step | 90° |
First stage | 66.38 lbf⋅ft |
Replace screw and intermediate wheel when loosening the screw. | |
Second stage | 90° |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 11.06 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 7.38 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 14.75 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
Toothed belt guard | 7.38 lbf⋅ft |
Toothed belt guard at the bottom | 7.38 lbf⋅ft |
Screws must be replaced. | |
Toothed belt guard at the top | 7.38 lbf⋅ft |
Screws must be replaced. | |
Toothed belt guard center | 7.38 lbf⋅ft |
Screws must be replaced. |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 5.9 lbf⋅ft |
Gradually tighten screws crosswise. | |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 6.64 lbf⋅ft |
Tighten cross-wise. See figure 7. | |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 6.64 lbf⋅ft |
Tighten cross-wise. See figure 7. | |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 6.64 lbf⋅ft |
Tighten cross-wise. See figure 7. |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 11.06 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 11.06 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 5.9 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 5.9 lbf⋅ft |
All other modifications | 8.11 lbf⋅ft |
Oil drain plug | 22.13 lbf⋅ft |
Screws must be replaced. |
Oil filter cover | 18.44 lbf⋅ft |
Slightly oil sealing lips. |
Oil filter cover | 18.44 lbf⋅ft |
Oil filter drain plug | 7.38 lbf⋅ft |
On the engine block | 16.96 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Bolts must be replaced. | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
Oil pressure sensor | 14.75 lbf⋅ft |
M6 screws | 6.64 lbf⋅ft |
M8 screws | 14.75 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
At the gearbox | 33.19 lbf⋅ft |
On the engine block | 7.38 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Screws must be replaced. | |
Second stage | 45° |
First stage | 11.06 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 9.59 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 9.59 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
Camshaft sensor | 7.38 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 3.69 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 7.38 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 7.38 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
Exhaust gas temperature sensor | 44.25 lbf⋅ft |
Glow plugs | 13.28 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
All Volkswagen gasoline straight-4 2.0 Liters CCZB engines | 40.57 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAA engines | 40.57 lbf⋅ft |
All Volkswagen gasoline straight-4 1.8 Liters CDAB engines | 40.57 lbf⋅ft |
All other modifications | 36.88 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Screws must be replaced. | |
Second stage | 180° |
First stage | 73.76 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
M10 | 29.5 lbf⋅ft |
Nuts must be replaced. | |
M8 | 18.44 lbf⋅ft |
Nuts must be replaced. |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 16.96 lbf⋅ft |
Nuts must be replaced. | |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 16.96 lbf⋅ft |
Nuts must be replaced. | |
All other modifications | 29.5 lbf⋅ft |
Nuts must be replaced. Use hot screw paste. |
On catalytic converter | 18.44 lbf⋅ft |
On the engine block | 7.38 lbf⋅ft |
Diesel particulate filter | 5.16 lbf⋅ft |
Differential pressure sensor lines | 33.19 lbf⋅ft |
Use hot screw paste | |
Exhaust manifold | 18.44 lbf⋅ft |
Replace the nuts and tighten alternately |
All Volkswagen diesel straight-4 2.0 Liters CFGC engines | 5.16 lbf⋅ft |
All Volkswagen flexfuel straight-4 1.4 Liters CKMA engines | 7.38 lbf⋅ft |
All Volkswagen gasoline straight-4 1.4 Liters CTHD engines | 7.38 lbf⋅ft |
Clamps | 25.81 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 14.75 lbf⋅ft |
First stage | 66.38 lbf⋅ft |
Screws must be replaced. | |
Second stage | 90° |
Otherwise | 18.44 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Nuts must be replaced. |
Clamps | 18.44 lbf⋅ft |
Fuel filter housing | 7.38 lbf⋅ft |
All Volkswagen gasoline vr-6 3.6 Liters BWS engines | 13.28 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 55.32 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 Volkswagen CC user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen CC service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2014 Volkswagen CC you're not only saving money, but also also improving your technical skills and learning something new.
Volkswagen CC First generation facelift model years
logo_volkswagen 2012logo_volkswagen 2013-
logo_volkswagen 2014 logo_volkswagen 2015logo_volkswagen 2016logo_volkswagen 2017