2015 Volkswagen Caddy Van Third generation facelift Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
1.2 TSI with gasoline straight-4 1.2 L 103 HP at 5000 RPM, 175 N⋅m at 1550 RPM engine (2010.9–) | 14.75 lbf⋅ft |
1.2 TSI with gasoline straight-4 1.2 L 84 HP at 4800 RPM, 160 N⋅m at 1500 RPM engine (2010.9–) | 14.75 lbf⋅ft |
1.6 (2005.3–) | 18.44 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP at 5600 RPM, 148 N⋅m at 3800 RPM engine (2004.4–) | 18.44 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.4–) | 18.44 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.4–) | 18.44 lbf⋅ft |
At the cylinder head | 14.75 lbf⋅ft |
Upper section of intake manifold | 5.9 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
Auxiliary drive belt deflection pulley | 29.5 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Second stage | 180° |
All other modifications | 16.96 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Second stage | 90° |
All Volkswagen diesel straight-4 2.0 Liters CFJA engines | 33.19 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.2 Liters CBZA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 33.19 lbf⋅ft |
Air-conditioning compressor pressure line | 16.23 lbf⋅ft |
2.0 EcoFuel with CNG straight-4 2.0 L 107 HP engine (2006.4–) | 14.75 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 109 HP, 250 N⋅m at 1750 RPM engine (2010.8–) | 14.75 lbf⋅ft |
2.0 TDI with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2012.5–) | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Without air-conditioning system | 38.35 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZA engines | 18.44 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Screw in screw manually up to stop. |
Tighten crosswise from inside to outside. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 45° |
On engine sump | |
Fourth stage | 90° |
On the engine block |
All other modifications | 33.19 lbf⋅ft |
Hydraulic lines at the servo-steering pump | 6.64 lbf⋅ft |
Servo pump pulley | 18.44 lbf⋅ft |
Servo steering pump | 25.81 lbf⋅ft |
Vacuum pump | 7.38 lbf⋅ft |
Exhaust gas return cooler | 6.64 lbf⋅ft |
Exhaust gas return valve | 6.64 lbf⋅ft |
Exhaust recirculation pipe | 16.23 lbf⋅ft |
Replace nuts. |
1.2 TSI with gasoline straight-4 1.2 L 103 HP at 5000 RPM, 175 N⋅m at 1550 RPM engine (2010.9–) | 14.75 lbf⋅ft |
1.2 TSI with gasoline straight-4 1.2 L 84 HP at 4800 RPM, 160 N⋅m at 1500 RPM engine (2010.9–) | 14.75 lbf⋅ft |
1.6 (2005.3–) | 5.9 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP at 5600 RPM, 148 N⋅m at 3800 RPM engine (2004.4–) | 5.9 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.4–) | 5.9 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.4–) | 5.9 lbf⋅ft |
2.0 EcoFuel with CNG straight-4 2.0 L 107 HP engine (2006.4–) | 5.9 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
High-pressure line | 20.65 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Short screws | |
Third stage | 180° |
Long screws |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Central nuts | 70.07 lbf⋅ft |
Injection hoses | 20.65 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Charge air pipes | 6.64 lbf⋅ft |
Turbo charger | 17.7 lbf⋅ft |
Replace nuts. | |
Turbocharger bracket | 16.23 lbf⋅ft |
At the turbocharger | 14.75 lbf⋅ft |
On the engine block | 22.13 lbf⋅ft |
Support | 14.75 lbf⋅ft |
Otherwise | 12.54 lbf⋅ft |
Use new seal and screws. |
Banjo screws | 29.5 lbf⋅ft |
Replace sealing rings. |
Support | 14.75 lbf⋅ft |
Otherwise | 12.54 lbf⋅ft |
Use new seal and screws. |
Banjo screws | 29.5 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 14.75 lbf⋅ft |
On the engine block | 44.25 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZA engines | 6.64 lbf⋅ft |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 6.64 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
Coolant pump pulley | 14.75 lbf⋅ft |
Fan wheel | 3.69 lbf⋅ft |
Radiator mounting | 3.69 lbf⋅ft |
1.2 TSI with gasoline straight-4 1.2 L 103 HP at 5000 RPM, 175 N⋅m at 1550 RPM engine (2010.9–) | 5.9 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
1.2 TSI with gasoline straight-4 1.2 L 84 HP at 4800 RPM, 160 N⋅m at 1500 RPM engine (2010.9–) | 5.9 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
1.6 (2005.3–) | 16.96 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP at 5600 RPM, 148 N⋅m at 3800 RPM engine (2004.4–) | 16.96 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.4–) | 16.96 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.4–) | 16.96 lbf⋅ft |
2.0 EcoFuel with CNG straight-4 2.0 L 107 HP engine (2006.4–) | 14.75 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Tighten gradually and alternately from inside to outside. |
First stage | 22.13 lbf⋅ft |
Use new screws. See figure 1. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 1. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 1. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 1. | |
Second stage | 90° |
Third stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Screw in screw(s) finger tight. |
Screws 1 - 6 | |
Second stage | 4.43 lbf⋅ft |
Screws 1 - 6 |
Screws 1 – 4 | 14.75 lbf⋅ft |
Screws 5 – 6 | 9.59 lbf⋅ft |
Fourth stage | 90° |
Screws 1 - 6 |
First stage | 22.13 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 88.51 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 132.76 lbf⋅ft |
Use new screw. | |
Second stage | 135° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Engine block closure screws | 22.13 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Flywheel cover | 7.38 lbf⋅ft |
First stage | 47.94 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 4.43 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. |
M7 | 9.59 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | 47.94 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 30° |
Nuts | 14.75 lbf⋅ft |
Screws | 11.06 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Camshaft timing chain slip rail | 13.28 lbf⋅ft |
Camshaft timing chain tensioner | 44.25 lbf⋅ft |
Camshaft timing chain tensioning rail | 13.28 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Central screws | 73.76 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
Central screws | 73.76 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Central camshaft screws | 73.76 lbf⋅ft |
Use new screw. |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
All other modifications | 73.76 lbf⋅ft |
Drive belt tensioner device | 16.96 lbf⋅ft |
First stage | 66.38 lbf⋅ft |
Replace the screws and sprocket wheel. | |
Second stage | 90° |
Oil pump drive chain tensioner | 11.06 lbf⋅ft |
Toothed belt guard | 7.38 lbf⋅ft |
Use screw-locking compound. |
1.6 (2005.3–) | 16.96 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP at 5600 RPM, 148 N⋅m at 3800 RPM engine (2004.4–) | 16.96 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.4–) | 16.96 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.4–) | 16.96 lbf⋅ft |
2.0 EcoFuel with CNG straight-4 2.0 L 107 HP engine (2006.4–) | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 45° |
First stage | 3.69 lbf⋅ft |
Gradually tighten screws crosswise. | |
Second stage | 5.9 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 8.11 lbf⋅ft |
Oil drain plug | 22.13 lbf⋅ft |
Replace screws. |
Oil filter cover | 18.44 lbf⋅ft |
Slightly oil sealing lips. |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 180° |
First stage | 11.06 lbf⋅ft |
Second stage | 180° |
On the engine block | 11.06 lbf⋅ft |
Replace screws. | |
Otherwise | 180° |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Oil pressure sensor | 14.75 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Second stage | 90° |
With balance shaft module | 6.64 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
At the gearbox | 18.44 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 9.59 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 9.59 lbf⋅ft |
Replace bolts. |
At the gearbox | 29.5 lbf⋅ft |
With balance shaft module | 11.06 lbf⋅ft |
Otherwise | 9.59 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Tighten new bolts helically in outside to inside order. | |
At the gearbox | 29.5 lbf⋅ft |
Second stage | |
Third stage | 9.59 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
Second stage | |
Third stage | 11.06 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M6 | 11.06 lbf⋅ft |
Camshaft sensor | 7.38 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFJA engines | 6.64 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CLCA engines | 3.69 lbf⋅ft |
Crankshaft sensor | 3.69 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CFJA engines | 44.25 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CLCA engines | 33.19 lbf⋅ft |
Glow plugs | 13.28 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CLCA engines | 36.88 lbf⋅ft |
All other modifications | 40.57 lbf⋅ft |
1.2 TSI with gasoline straight-4 1.2 L 103 HP at 5000 RPM, 175 N⋅m at 1550 RPM engine (2010.9–) | 36.88 lbf⋅ft |
1.2 TSI with gasoline straight-4 1.2 L 84 HP at 4800 RPM, 160 N⋅m at 1500 RPM engine (2010.9–) | 36.88 lbf⋅ft |
1.6 (2005.3–) | 33.19 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP at 5600 RPM, 148 N⋅m at 3800 RPM engine (2004.4–) | 33.19 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.4–) | 33.19 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.4–) | 33.19 lbf⋅ft |
2.0 EcoFuel with CNG straight-4 2.0 L 107 HP engine (2006.4–) | 33.19 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screws. | |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Volkswagen gasoline straight-4 1.2 Liters CBZB engines | 36.88 lbf⋅ft |
Replace screws. |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5–36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
All Volkswagen CNG straight-4 2.0 Liters BSX engines | 29.5 lbf⋅ft |
Replace nuts. | |
All Volkswagen diesel straight-4 2.0 Liters CLCA engines | 5.16 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. |
Catalytic converter bracket | 18.44 lbf⋅ft |
Clamps | 5.16 lbf⋅ft |
Support | 18.44 lbf⋅ft |
All other modifications | 5.16 lbf⋅ft |
Replace sealing rings. |
First stage | 13.28 lbf⋅ft |
Replace the nuts and tighten alternately | |
Second stage | 8.85 lbf⋅ft |
Third stage | 8.85 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. |
All Volkswagen diesel straight-4 2.0 Liters CFJA engines | 17.7 lbf⋅ft |
All Volkswagen diesel straight-4 2.0 Liters CLCA engines | 6.64–8.85 lbf⋅ft |
Exhaust pipe | 18.44 lbf⋅ft |
All Volkswagen CNG straight-4 2.0 Liters BSX engines | 11.06 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Particle filter bracket | 18.44 lbf⋅ft |
Particulate filter heat protection plate | 7.38 lbf⋅ft |
Fuel filter bracket | 7.38 lbf⋅ft |
Fuel filter cover | 3.69 lbf⋅ft |
Fuel lines | 18.44 lbf⋅ft |
Spark plugs | 18.44 lbf⋅ft |
M10 | 44.25 lbf⋅ft |
M12 | 55.32 lbf⋅ft |
All other modifications | 55.32 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2015 Volkswagen Caddy Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Caddy Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2015 Volkswagen Caddy Van you're not only saving money, but also also improving your technical skills and learning something new.
2015 Volkswagen Caddy Van generations
In 2015 Volkswagen offered 2 generations of the Caddy Van. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.