2006 Volkswagen Bora Wagon First generation Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
AWD clutch oil control screws | 22.13 lbf⋅ft |
Replace sealing rings. | |
AWD clutch oil drain plug | 11.06 lbf⋅ft |
Replace sealing rings. | |
Drive shaft heat protection plate | 25.81 lbf⋅ft |
First stage | 147.51 lbf⋅ft |
Replace nuts. | |
Second stage | 180° detach |
Fourth stage | 60° |
Gearbox drive shaft transfer case | 44.25 lbf⋅ft |
Propeller shaft intermediate bearing | 18.44 lbf⋅ft |
M8 | 29.5 lbf⋅ft |
M10 | 51.63 lbf⋅ft |
Rear | 29.5 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace nuts. | |
Second stage | 60° |
Transfer case propeller shaft rear axle | 44.25 lbf⋅ft |
Replace screws and nuts. |
Clutch master cylinder | 18.44 lbf⋅ft |
Replace nuts. |
All other modifications | 14.75 lbf⋅ft |
Gradually tighten screws crosswise. |
All other modifications | 18.44 lbf⋅ft |
Differential oil control screws | 18.44 lbf⋅ft |
Differential oil drain plug | 18.44 lbf⋅ft |
Oil drain plug | 18.44 lbf⋅ft |
Oil filler screws | 18.44 lbf⋅ft |
Gear rod | 14.75 lbf⋅ft |
Gearbox shift lever | 14.75 lbf⋅ft |
Replace nuts. | |
Selector cable linkage | 18.44 lbf⋅ft |
M10 | 18.44 lbf⋅ft |
M12 | 59 lbf⋅ft |
Torque converter | 44.25 lbf⋅ft |
Overflow pipe | 2.21 lbf⋅ft |
Plug | 11.06 lbf⋅ft |
Replace sealing ring. |
09A gearbox | 33.19 lbf⋅ft |
Replace sealing rings. |
02J gearbox | 22.13 lbf⋅ft |
Hexagon head screws | 22.13 lbf⋅ft |
With Torx screws | 33.19 lbf⋅ft |
02J gearbox | 18.44 lbf⋅ft |
02K gearbox | 18.44 lbf⋅ft |
Hexagon head screws | 22.13 lbf⋅ft |
Use new seal and screws. | |
With Torx screws | 33.19 lbf⋅ft |
Use new seal and screws. |
09A gearbox | 11.06 lbf⋅ft |
Replace sealing rings. |
M8 | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
With manual transmission | 73.76 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Second stage | 45° |
Power take-off flange rear | 258.15 lbf⋅ft |
Replace nuts. |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2006 Volkswagen Bora Wagon user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Volkswagen warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Diagnostic Values
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Volkswagen Bora Wagon service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2006 Volkswagen Bora Wagon you're not only saving money, but also also improving your technical skills and learning something new.