2008 Vauxhall Insignia Wagon First generation (MK1) Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
AWD clutch oil control screws | 10.33 lbf⋅ft |
Drive shaft intermediate bearing | 16.23 lbf⋅ft |
First stage | 110.63 lbf⋅ft |
Replace nuts. | |
Second stage | 45° detach |
Third stage | 184.39 lbf⋅ft |
Propeller shaft intermediate bearing | 14.75 lbf⋅ft |
At the differential | 22.13 lbf⋅ft |
Use screw-locking compound. |
First stage | 110.63 lbf⋅ft |
Replace nuts. | |
Second stage | loosen by 45° |
Third stage | 184.39 lbf⋅ft |
Clutch master cylinder | 16.23 lbf⋅ft |
2.0 CDTI with diesel straight-4 2.0 L 109 HP at 4000 RPM, 260 N⋅m at 1750 RPM engine (2008.7–) | 18.44 lbf⋅ft |
M7 | 11.06 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
All other modifications | 20.65 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 114 HP engine (2008.7–) | 14.75 lbf⋅ft |
All other modifications | 4.43 lbf⋅ft |
Concentric slave cylinder. Use screw-locking compound. |
First stage | 29.5 lbf⋅ft |
Second stage | 90° |
Rear axle differential oil control screws | 10.33 lbf⋅ft |
Rear axle differential oil drain plug | 18.44 lbf⋅ft |
Rear axle differential oil filler screws | 18.44 lbf⋅ft |
Back-up lamp switch | 14.75 lbf⋅ft |
Selector cable linkage | 14.75 lbf⋅ft |
2.0 Turbo 4x4 with gasoline straight-4 2.0 L 217 HP at 5300 RPM, 350 N⋅m at 2000 RPM engine (2008.7–) | 44.25 lbf⋅ft |
2.0 Turbo with gasoline straight-4 2.0 L 217 HP at 5300 RPM, 350 N⋅m at 2000 RPM engine (2008.7–) | 44.25 lbf⋅ft |
On engine sump | 29.5 lbf⋅ft |
On the engine block | 44.25 lbf⋅ft |
AAM transfer case | 29.5 lbf⋅ft |
Use new seal and screws. |
AAM transfer case | 29.5 lbf⋅ft |
Replace screws. |
6T30 gearbox | 8.85 lbf⋅ft |
6T40 gearbox | 8.85 lbf⋅ft |
6T45 gearboxes | 8.85 lbf⋅ft |
AF40-6 gearbox | 8.85 lbf⋅ft |
F40-6 gearbox | 22.13 lbf⋅ft |
M32 gearbox | 14.75 lbf⋅ft |
Replace screws. | |
M32-6 gearbox | 14.75 lbf⋅ft |
Replace screws. |
AF40-6 gearbox | 29.5 lbf⋅ft |
Replace sealing rings. | |
F40-6 gearbox | 22.13 lbf⋅ft |
M32-6 gearbox | 22.13 lbf⋅ft |
Replace screws. |
6T30 gearbox | 8.85 lbf⋅ft |
6T40 gearbox | 8.85 lbf⋅ft |
6T45 gearboxes | 8.85 lbf⋅ft |
6T70 gearboxes | 8.85 lbf⋅ft |
Overflow pipe | 34.67 lbf⋅ft |
Replace sealing rings. | |
Locking screws | 5.9 lbf⋅ft |
Replace sealing rings. |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
Third stage | 15° |
Nuts on the chassis | 14.75 lbf⋅ft |
Screws on the chassis | 16.23 lbf⋅ft |
Screws at the gearbox bracket | 59 lbf⋅ft |
On chassis | 16.23 lbf⋅ft |
At the gearbox | 73.76 lbf⋅ft |
Variant 1 | 59 lbf⋅ft |
With plain washer | |
Variant 2 | 73.76 lbf⋅ft |
Collar screw |
2.0 CDTI 4x4 with diesel straight-4 2.0 L 158 HP at 4000 RPM, 350 N⋅m at 1750 RPM engine (2008.7–) | 73.76 lbf⋅ft |
At the gearbox | 73.76 lbf⋅ft |
Front | 29.5 lbf⋅ft |
2.0 Turbo 4x4 with gasoline straight-4 2.0 L 217 HP at 5300 RPM, 350 N⋅m at 2000 RPM engine (2008.7–) | 73.76 lbf⋅ft |
2.0 Turbo with gasoline straight-4 2.0 L 217 HP at 5300 RPM, 350 N⋅m at 2000 RPM engine (2008.7–) | 73.76 lbf⋅ft |
At the gearbox | 73.76 lbf⋅ft |
On the engine block | 44.25 lbf⋅ft |
Tighten the screws evenly in several steps. | |
On transfer case | 44.25 lbf⋅ft |
Transfer box onto transmission flange connection | 81.13 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2008 Vauxhall Insignia Wagon user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Vauxhall warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Vauxhall Insignia Wagon service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2008 Vauxhall Insignia Wagon you're not only saving money, but also also improving your technical skills and learning something new.