2013 Vauxhall Insignia Sedan First generation facelift (MK1) Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Bleed valve | 7.38 lbf⋅ft |
Brake hose | 29.5 lbf⋅ft |
Replace sealing rings. | |
Brake line | 13.28 lbf⋅ft |
RPO code J60 | 20.65 lbf⋅ft |
RPO code J61 | 20.65 lbf⋅ft |
RPO code J62 | 23.6 lbf⋅ft |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
Third stage | 15° |
M14, first stage | 110.63 lbf⋅ft |
Replace screws. | |
M14 second stage | 45° |
M14 third stage | 15° |
Front axle brake disc | 5.16 lbf⋅ft |
Wheel speed sensor | 6.64 lbf⋅ft |
Lower steering column joint | 25.08 lbf⋅ft |
Use screw-locking compound. | |
Pressure line at steering gear | 28.03 lbf⋅ft |
Steering column | 16.23 lbf⋅ft |
Replace screws and nuts. |
First stage | 18.44 lbf⋅ft |
Use screw-locking compound. | |
Second stage | 180° |
First stage | 81.13 lbf⋅ft |
Use new screws and nuts. | |
Second stage | 150° |
Steering wheel | 33.19 lbf⋅ft |
Replace nuts. |
First stage | 25.81 lbf⋅ft |
Replace nuts. | |
Second stage | 30° |
Self-locking nuts | 50.15 lbf⋅ft |
Track rod on steering gear | 44.25 lbf⋅ft |
Shock-absorber piston rod | 51.63 lbf⋅ft |
On chassis | 40.57 lbf⋅ft |
Replace nuts. |
First stage | 62.69 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 60° |
HiPer suspension strut | 51.63 lbf⋅ft |
Replace screws and nuts. |
First stage | 110.63 lbf⋅ft |
Replace nuts. | |
Second stage | 45° detach |
Third stage | 184.39 lbf⋅ft |
Stabiliser mounting at the stabiliser | 47.94 lbf⋅ft |
Stabiliser mounting at suspension strut | 47.94 lbf⋅ft |
First stage | 16.23 lbf⋅ft |
Replace screws. | |
Second stage | 30° |
First stage | 36.88 lbf⋅ft |
Replace screws and nuts. | |
Second stage | loosen 120° |
Third stage | 36.88 lbf⋅ft |
Fourth stage | 45° |
First stage | 84.82 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 120° |
HiPer suspension strut | 5.16 lbf⋅ft |
First stage | 33.19 lbf⋅ft |
Replace nuts. | |
Second stage | 30° |
Third stage | 15° |
First stage | 51.63 lbf⋅ft |
Tighten the nuts evenly in several steps. | |
Second stage | 360° detach |
Third stage | 51.63 lbf⋅ft |
First stage | 51.63 lbf⋅ft |
Replace nuts. | |
Second stage | 45° |
Third stage | 15° |
First stage | 84.82 lbf⋅ft |
Replace nuts. | |
Second stage | 45° |
Third stage | 15° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 40.57 lbf⋅ft |
Use new screw. | |
Second stage | 100° |
First stage | 73.76 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 75° |
Tire pressure sensors | 6.64 lbf⋅ft |
Wheel attachment | 110.63 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Vauxhall Insignia Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Vauxhall warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Vauxhall Insignia Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Vauxhall Insignia Sedan you're not only saving money, but also also improving your technical skills and learning something new.
2013 Vauxhall Insignia Sedan generations
In 2013 Vauxhall offered 2 generations of the Insignia Sedan. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.