2013 Vauxhall Insignia Sedan First generation facelift (MK1) Automatic Transmission Fluid Capacity
For 2013 Insignia Sedan First generation facelift (MK1) Vauxhall recommends to use: ATF Dexron VI, and ATF AW-1 automatic transmission fluids and genuine OEM automatic transmission fluid with a part number: 93165147. To select the right automatic transmission fluid see the table below.
How much automatic transmission fluid you need to put into 2013 Insignia Sedan depends on conditions listed below.
in your garage to make future searches easy.
Condition | Volume |
---|
6T70 gearboxes | 4.23–6.34 US qt. |
Automatic transmission fluid: ATF Dexron VI |
AF40-6 gearbox | 4.23–6.34 US qt. |
Part number: 93165147 |
AF40-6 gearbox | 4.23–6.34 US qt. |
Part number: 93165147 |
Amount to change | 3.17 US qt. |
Automatic transmission fluid: ATF AW-1 |
Without special equipment it is possible to replace only ATF in the AT pan because of the way automatic transmission in 2013 Vauxhall Insignia Sedan has been designed. It will take about 30–90 minutes depends on your skill level and might save you up to $200 depends on the region you live in.
With a spanner or a retched with the right size head unscrew the refill plug and the drain plug. After that drain old AT fluid. If you want to replace the filter you need to remove the ATF pan, replace the filter and then install the ATF pan back with a new gasket. Screw back the drain plug with a new gasket and refill the transmission with new ATF.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Vauxhall Insignia Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Vauxhall warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Vauxhall Insignia Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Vauxhall Insignia Sedan you're not only saving money, but also also improving your technical skills and learning something new.
2013 Vauxhall Insignia Sedan generations
In 2013 Vauxhall offered 2 generations of the Insignia Sedan. Automatic transmission fluid capacity may vary in different generations. Be sure that you are looking at the rigt modification.