expand_more2.0 CDTI with diesel straight-4 2.0 L 148 HP engine (2006.8–2015.4)
On chassis
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
On stub axle
132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
expand_moreAll other modifications
On chassis
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_moreWheel suspension
expand_moreFront axle drive shaft
expand_more2.0 CDTi with diesel straight-4 2.0 L 125 HP engine (2006.8–2015.4)
Central nuts
147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
expand_moreAll other modifications
Central screws
236.02 lbf⋅ft236.02 lbf⋅ft320 N⋅m
Stabiliser mounting at the stabiliser
47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Stabiliser mounting at suspension strut
47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Stabilizer mounting at the subframe
36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
expand_moreSupport joint at the stub axle
2.0 CDTI with diesel straight-4 2.0 L 148 HP engine (2006.8–2015.4)
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Insert new locking pin.
2.0 CDTi with diesel straight-4 2.0 L 125 HP engine (2006.8–2015.4)
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Insert new locking pin.
All other modifications
29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Support joint at the transverse control arm
50.15 lbf⋅ft50.15 lbf⋅ft68 N⋅m
expand_moreFront axle suspension
On chassis
114.32 lbf⋅ft114.32 lbf⋅ft155 N⋅m
expand_moreUpper transverse control arm
On stub axle
118.01 lbf⋅ft118.01 lbf⋅ft160 N⋅m
Lower front transverse control arm
88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Lower rear transverse control arm
51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
expand_moreTrack control arm lower
expand_more2.0 CDTI with diesel straight-4 2.0 L 148 HP engine (2006.8–2015.4)
Nuts
51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Screws
88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
expand_moreAll other modifications
On stub axle
132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
expand_moreWheel hub wheel bearing
expand_more2.0 CDTI with diesel straight-4 2.0 L 148 HP engine (2006.8–2015.4)
Central nuts
151.2 lbf⋅ft151.2 lbf⋅ft205 N⋅m
Wheel bearing unit
84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
expand_moreAll other modifications
Central nuts
151.2 lbf⋅ft151.2 lbf⋅ft205 N⋅m
Replace nuts.
On stub axle
84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
expand_moreWheels and tires
Tire pressure sensors
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
expand_moreWheel attachment
expand_more2.0 CDTI with diesel straight-4 2.0 L 148 HP engine (2006.8–2015.4)
Nuts
92.2 lbf⋅ft92.2 lbf⋅ft125 N⋅m
Screws
103.26 lbf⋅ft103.26 lbf⋅ft140 N⋅m
2.4 with gasoline straight-4 2.4 L 139 HP engine (2006.8–2015.4)
92.2 lbf⋅ft92.2 lbf⋅ft125 N⋅m
All other modifications
103.26 lbf⋅ft103.26 lbf⋅ft140 N⋅m
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2007 Vauxhall Antara user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Vauxhall warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Vauxhall Antara service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2007 Vauxhall Antara you're not only saving money, but also also improving your technical skills and learning something new.
Vauxhall Antara First generation (MK1) model years