2014 Toyota Yaris Third generation facelift Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Vehicles produces on France facility (TMMF) | 12.54 lbf⋅ft |
Vehicles produces on Japan facility (TMC) | 5.9 lbf⋅ft |
Vehicles produces on France facility (TMMF) | 12.54 lbf⋅ft |
Otherwise | 6.12 lbf⋅ft |
Brake hose | 22.13 lbf⋅ft |
Brake line | 11.06 lbf⋅ft |
Vehicles produces on France facility (TMMF) | 20.65 lbf⋅ft |
Vehicles produces on Japan facility (TMC) | 25.08 lbf⋅ft |
Front axle brake caliper mounting support | 78.92 lbf⋅ft |
Wheel speed sensor | 6.64 lbf⋅ft |
Lower steering column joint | 25.81 lbf⋅ft |
Steering column joint upper | 25.81 lbf⋅ft |
Steering gear | 70.81 lbf⋅ft |
Steering wheel | 36.88 lbf⋅ft |
Track rod end on stub axle | 36.14 lbf⋅ft |
Replace nuts. | |
Track rod end on track rod | 55.32 lbf⋅ft |
Shock absorber | 120.96 lbf⋅ft |
Toyota gasoline straight-3 1.0 L 1KR-FE 68 HP | 24.34 lbf⋅ft |
Replace nuts. | |
Toyota diesel straight-4 1.4 L 1ND-TV 89 HP | 24.34 lbf⋅ft |
Replace nuts. | |
Toyota gasoline straight-4 1.3 L 1NR-FKE 98 HP | 24.34 lbf⋅ft |
Replace nuts. | |
Toyota gasoline straight-4 1.3 L 1NR-FE 98 HP | 24.34 lbf⋅ft |
Replace nuts. | |
All other modifications | 40.57 lbf⋅ft |
On chassis | 40.57 lbf⋅ft |
Replace nuts. | |
On stub axle | 120.96 lbf⋅ft |
Replace screws and nuts. |
Front axle drive shaft | 159.31 lbf⋅ft |
Replace and caulk the nut. | |
Stabiliser mounting at the stabiliser | 54.58 lbf⋅ft |
Stabiliser mounting at suspension strut | 54.58 lbf⋅ft |
Stabilizer mounting at the subframe | 34.67 lbf⋅ft |
Supporting joint on the suspension strut mounting | 72.28 lbf⋅ft |
Lower rear transverse control arm | 111.37 lbf⋅ft |
Stabilizer of front axle on axle | 34.67 lbf⋅ft |
Track control arm lower | 101.05 lbf⋅ft |
Wheel attachment | 75.97 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 Toyota Yaris user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Yaris service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2014 Toyota Yaris you're not only saving money, but also also improving your technical skills and learning something new.
2014 Toyota Yaris generations
In 2014 Toyota offered 3 generations of the Yaris. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.