2008 Toyota HiLux Pickup Seventh generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Intake manifold | 21.39 lbf⋅ft |
Intake manifold support | 14.01 lbf⋅ft |
Auxiliary drive belt deflection pulley | 33.19 lbf⋅ft |
Auxiliary drive belt tensioner | 15.49 lbf⋅ft |
Air-conditioning compressor | 18.44 lbf⋅ft |
2.5 D-4D 4WD with diesel straight-4 2.5 L 118 HP engine (2007.12–) | 34.67 lbf⋅ft |
2.5 D-4D with diesel straight-4 2.5 L 101 HP engine (2005.7–) | 34.67 lbf⋅ft |
2.5 D-4D with diesel straight-4 2.5 L 118 HP engine (2007.12–) | 34.67 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
2.5 D 4WD with diesel straight-4 2.5 L 101 HP engine (2005.8–) | 7.38 lbf⋅ft |
2.5 D-4D 4WD with diesel straight-4 2.5 L 142 HP engine (2007.12–) | 7.38 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
2.5 D 4WD with diesel straight-4 2.5 L 101 HP engine (2005.8–) | 18.44 lbf⋅ft |
2.5 D-4D 4WD with diesel straight-4 2.5 L 142 HP engine (2007.12–) | 18.44 lbf⋅ft |
Top | 45.73 lbf⋅ft |
Bottom | 18.44 lbf⋅ft |
Generator bracket | 15.49 lbf⋅ft |
Hydraulic lines at the servo-steering pump | 32.45 lbf⋅ft |
2.5 D 4WD with diesel straight-4 2.5 L 101 HP engine (2005.8–) | 16.23 lbf⋅ft |
2.5 D-4D 4WD with diesel straight-4 2.5 L 142 HP engine (2007.12–) | 16.23 lbf⋅ft |
All other modifications | 28.76 lbf⋅ft |
Vacuum pump | 15.49 lbf⋅ft |
Exhaust gas return cooler | 14.75 lbf⋅ft |
Exhaust gas return valve | 14.75 lbf⋅ft |
Exhaust recirculation pipe | 9.59 lbf⋅ft |
Fuel-distributing pipe | 28.03 lbf⋅ft |
On injector | 11.8 lbf⋅ft |
Otherwise | 25.81 lbf⋅ft |
High-pressure pump | 15.49 lbf⋅ft |
Central nuts | 47.2 lbf⋅ft |
Otherwise | 22.86 lbf⋅ft |
Banjo screws | 11.8 lbf⋅ft |
Banjo screws | 9.59 lbf⋅ft |
Union nuts | 25.81 lbf⋅ft |
Injection nozzle (injector) | 16.23 lbf⋅ft |
Injection pump | 15.49 lbf⋅ft |
Charge air pipes | 4.79 lbf⋅ft |
Turbo charger | 38.35 lbf⋅ft |
Turbocharger bracket | 28.03 lbf⋅ft |
At the turbocharger | 19.18 lbf⋅ft |
At the turbocharger | 9.59 lbf⋅ft |
On the engine block | 8.85 lbf⋅ft |
Coolant pump | 9.59 lbf⋅ft |
3.0 D-4D 4WD with diesel straight-4 3.0 L 169 HP engine (2007.12–) | 13.28 lbf⋅ft |
Fan wheel | 13.28 lbf⋅ft |
Camshaft bearing | 14.01 lbf⋅ft |
Tighten in several steps. |
First stage | 62.69 lbf⋅ft |
Tighten bolts uniformly in several passes. See figure 1. | |
Second stage | 90° |
Third stage | 90° |
First stage | 62.69 lbf⋅ft |
Tighten bolts uniformly in several passes. See figure 1. | |
Second stage | 90° |
Third stage | 90° |
First stage | 62.69 lbf⋅ft |
Tighten in several steps. See figure 1. | |
Second stage | 90° |
Third stage | 90° |
First stage | 62.69 lbf⋅ft |
Use new screws. See figure 1. | |
Second stage | 90° |
Third stage | 90° |
Valve cover | 6.64 lbf⋅ft |
3.0 D-4D 4WD with diesel straight-4 3.0 L 169 HP engine (2007.12–) | 26.55 lbf⋅ft |
First stage | 25.81 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 25.81 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 25.81 lbf⋅ft |
Second stage | 90° |
Crankshaft central screws | 269.21 lbf⋅ft |
3.0 D-4D 4WD with diesel straight-4 3.0 L 169 HP engine (2007.12–) | 131.29 lbf⋅ft |
Tighten cross-wise. |
2.5 D 4WD with diesel straight-4 2.5 L 101 HP engine (2005.8–) | 57.53 lbf⋅ft |
Replace screws. | |
2.5 D-4D 4WD with diesel straight-4 2.5 L 142 HP engine (2007.12–) | 57.53 lbf⋅ft |
Replace screws. | |
All other modifications | 131.29 lbf⋅ft |
Tighten cross-wise. |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
cross-wise from inside to outside | |
Second stage | 90° |
Camshaft timing gear | 72.28 lbf⋅ft |
Replace nuts. | |
Control drive sprocket wheel | 36.88 lbf⋅ft |
Replace screws. | |
Drive belt tensioner device | 9.59 lbf⋅ft |
Timing case cover | 9.59 lbf⋅ft |
On the engine block | 7.38 lbf⋅ft |
Otherwise | 4.43 lbf⋅ft |
On the engine block | 7.38 lbf⋅ft |
Otherwise | 4.43 lbf⋅ft |
All other modifications | 4.43 lbf⋅ft |
Toothed belt tensioning roller | 25.81 lbf⋅ft |
Replace screws. | |
Toothed belt tightener | 9.59 lbf⋅ft |
Oil cooler | 11.8 lbf⋅ft |
Oil drain plug | 25.08 lbf⋅ft |
Oil filter | 8.85 lbf⋅ft |
Banjo screws | 19.18 lbf⋅ft |
Nuts | 9.59 lbf⋅ft |
Screws on the engine block | 8.85 lbf⋅ft |
Oil pressure sensor | 11.06 lbf⋅ft |
Oil pump | 9.59 lbf⋅ft |
2.5 D-4D 4WD with diesel straight-4 2.5 L 118 HP engine (2007.12–) | 11.8 lbf⋅ft |
2.5 D-4D with diesel straight-4 2.5 L 101 HP engine (2005.7–) | 11.8 lbf⋅ft |
2.5 D-4D with diesel straight-4 2.5 L 118 HP engine (2007.12–) | 11.8 lbf⋅ft |
All other modifications | 8.85 lbf⋅ft |
Camshaft sensor | 6.27 lbf⋅ft |
2.5 D 4WD with diesel straight-4 2.5 L 101 HP engine (2005.8–) | 3.69 lbf⋅ft |
2.5 D-4D 4WD with diesel straight-4 2.5 L 142 HP engine (2007.12–) | 3.69 lbf⋅ft |
All other modifications | 6.27 lbf⋅ft |
Glow plugs | 9.59 lbf⋅ft |
Engine bracket | 35.4 lbf⋅ft |
2.5 D-4D 4WD with diesel straight-4 2.5 L 118 HP engine (2007.12–) | 32.45 lbf⋅ft |
2.5 D-4D with diesel straight-4 2.5 L 101 HP engine (2005.7–) | 32.45 lbf⋅ft |
2.5 D-4D with diesel straight-4 2.5 L 118 HP engine (2007.12–) | 32.45 lbf⋅ft |
With automatic gearbox | 47.94 lbf⋅ft |
With manual transmission | 32.45 lbf⋅ft |
All other modifications | 35.4 lbf⋅ft |
Engine suspension | 50.15 lbf⋅ft |
At the turbocharger | 31.72 lbf⋅ft |
Replace nuts. |
Exhaust manifold | 29.5 lbf⋅ft |
Replace nuts. | |
Exhaust manifold heat shields | 8.85 lbf⋅ft |
2.5 D 4WD with diesel straight-4 2.5 L 101 HP engine (2005.8–) | 45.73 lbf⋅ft |
2.5 D-4D 4WD with diesel straight-4 2.5 L 142 HP engine (2007.12–) | 45.73 lbf⋅ft |
Center | 35.4 lbf⋅ft |
Front | 31.72 lbf⋅ft |
Exhaust pipe bracket | 53.1 lbf⋅ft |
Exhaust pipe rear | 35.4 lbf⋅ft |
Starter | 50.15 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2008 Toyota HiLux Pickup user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota HiLux Pickup service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2008 Toyota HiLux Pickup you're not only saving money, but also also improving your technical skills and learning something new.
2008 Toyota HiLux Pickup generations
In 2008 Toyota offered 2 generations of the HiLux Pickup. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.