2001 Toyota Corolla Sedan Ninth generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
All other modifications | 14.75 lbf⋅ft |
Alternator | 29.5 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
On the engine block | 27.29 lbf⋅ft |
Injection hoses | 25.08 lbf⋅ft |
All other modifications | 19.18 lbf⋅ft |
Injection pump | 15.49 lbf⋅ft |
Injection pump pulley | 75.97 lbf⋅ft |
Bearing cap 1 | 16.96 lbf⋅ft |
Other bearing caps | 9.59 lbf⋅ft |
First stage | 36.14 lbf⋅ft |
See figure 1. | |
Second stage | 90° |
Cylinder head screws shank length (maximum) | 6.28 in |
Cylinder head screws shank length (new) | 6.14–6.26 in |
All other modifications | 9.59 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
All other modifications | 132.76 lbf⋅ft |
Replace screws. |
First stage | 36.14 lbf⋅ft |
Second stage | 90° |
First stage | 32.45 lbf⋅ft |
Second stage | 90° |
Third stage | 14.01 lbf⋅ft |
Camshaft drive belt deflection pulley | 34.67 lbf⋅ft |
Camshaft timing chain tensioning rail | 14.01 lbf⋅ft |
All other modifications | 39.83 lbf⋅ft |
Chain tensioner | 6.64 lbf⋅ft |
Toothed belt guard | 5.16 lbf⋅ft |
Hexagon socket screw (M8) | 25.81 lbf⋅ft |
On the engine block | 15.49 lbf⋅ft |
All other modifications | 27.29 lbf⋅ft |
Replace sealing rings. |
All other modifications | 6.64 lbf⋅ft |
Camshaft sensor | 6.64 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
Lambda sensor | 32.45 lbf⋅ft |
Manufacturer TMUK | 98.1 lbf⋅ft |
Front | 115.8 lbf⋅ft |
Rear | 83.34 lbf⋅ft |
Front | 115.8 lbf⋅ft |
Rear | 83.34 lbf⋅ft |
Front | 98.1 lbf⋅ft |
Rear | 83.34 lbf⋅ft |
Manufacturer TMUK | 59 lbf⋅ft |
Front | 38.35 lbf⋅ft |
Rear | 38.35 lbf⋅ft |
All other modifications | 27.29 lbf⋅ft |
Spark plugs | 18.44 lbf⋅ft |
Starter | 27.29 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2001 Toyota Corolla Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Toyota warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Toyota Corolla Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2001 Toyota Corolla Sedan you're not only saving money, but also also improving your technical skills and learning something new.
2001 Toyota Corolla Sedan generations
In 2001 Toyota offered 3 generations of the Corolla Sedan. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.