2004 Opel Corsa Box Van C facelift Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Bleed valve | 5.16 lbf⋅ft |
Brake hose | 29.5 lbf⋅ft |
Replace sealing rings. | |
Brake line | 11.8 lbf⋅ft |
Front axle brake caliper | 19.91 lbf⋅ft |
Front axle brake caliper mounting support | 73.76 lbf⋅ft |
Clean the thread and use screw-locking compound. | |
Front axle brake disc | 5.16 lbf⋅ft |
First stage | 17.7 lbf⋅ft |
Use screw-locking compound. | |
Second stage | 60° |
Nuts | 16.23 lbf⋅ft |
Screws | 16.23 lbf⋅ft |
First stage | 33.19 lbf⋅ft |
Use new screws or nuts | |
Second stage | 45° |
Third stage | 15° |
First stage | 33.19 lbf⋅ft |
Use new screws and nuts. | |
Second stage | 45° |
Third stage | 15° |
Steering wheel | 22.13 lbf⋅ft |
Use screw-locking compound. | |
Track rod end on stub axle | 25.81 lbf⋅ft |
Replace nuts. | |
Track rod end on track rod | 36.88 lbf⋅ft |
Track rod on steering gear | 51.63 lbf⋅ft |
Use screw-locking compound. |
Shock-absorber piston rod | 36.88 lbf⋅ft |
Replace nuts. |
First stage | 59 lbf⋅ft |
Use new screws and nuts. | |
Second stage | 60° |
Third stage | 15° |
First stage | 59 lbf⋅ft |
Second stage | 60° |
Third stage | 15° |
Top | 40.57 lbf⋅ft |
First stage | 88.51 lbf⋅ft |
Insert new locking pin. | |
Second stage | slacken |
Third stage | 14.75 lbf⋅ft |
Fourth stage | 90° |
First stage | 95.88 lbf⋅ft |
Insert new locking pin. | |
Second stage | slacken |
Third stage | 14.75 lbf⋅ft |
Fourth stage | 90° |
Stabiliser mounting at the stabiliser | 47.94 lbf⋅ft |
Replace nuts. | |
Stabiliser mounting at suspension strut | 47.94 lbf⋅ft |
Replace nuts. | |
Support joint at the stub axle | 44.25 lbf⋅ft |
Replace screws and nuts. | |
Support joint at the transverse control arm | 40.57 lbf⋅ft |
Replace screws and nuts. |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Third stage | 15° |
First stage | 66.38 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 75° |
Third stage | 15° |
First stage | 88.51 lbf⋅ft |
Replace locking pins. | |
Second stage | slacken |
Third stage | 14.75 lbf⋅ft |
Fourth stage | 90° |
Wheel attachment | 81.13 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2004 Opel Corsa Box Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Corsa Box Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2004 Opel Corsa Box Van you're not only saving money, but also also improving your technical skills and learning something new.