For 2013 Combo Flat Bed D Opel recommends to use: DOT 4 Plus clutch fluids. To select the right clutch fluid see the table below.
How much clutch fluid you need to put into 2013 Combo Flat Bed depends on.
in your garage to make future searches easy.
|2.0 CDTI with diesel straight-4 2.0 L 133 HP engine (2012.8–)||8.45 US fl. oz.|
|Clutch fluid: DOT 4 Plus|
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Opel Combo Flat Bed user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Combo Flat Bed service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Opel Combo Flat Bed you're not only saving money, but also also improving your technical skills and learning something new.