2013 Kia Rio Sedan front suspension fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreFront axle brake


Bleed valve	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreBrake hose


At the brake caliper	18.44–22.13 lbf⋅ft18.44–22.13 lbf⋅ft25–30 N⋅m


Front axle brake caliper	16.23–22.13 lbf⋅ft16.23–22.13 lbf⋅ft22–30 N⋅m
Front axle brake caliper mounting support	59–73.76 lbf⋅ft59–73.76 lbf⋅ft80–100 N⋅m
Front axle brake disc	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Wheel speed sensor	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreFront axle steering


Lower steering column joint	23.6–28.03 lbf⋅ft23.6–28.03 lbf⋅ft32–38 N⋅m

expand_moreSteering column


Nuts	11.06–14.75 lbf⋅ft11.06–14.75 lbf⋅ft15–20 N⋅m
Screws	33.19–36.88 lbf⋅ft33.19–36.88 lbf⋅ft45–50 N⋅m


Steering gear	44.25–59 lbf⋅ft44.25–59 lbf⋅ft60–80 N⋅m
Steering wheel	29.5–33.19 lbf⋅ft29.5–33.19 lbf⋅ft40–45 N⋅m
Track rod end on stub axle	18.44–22.13 lbf⋅ft18.44–22.13 lbf⋅ft25–30 N⋅m
Track rod end on track rod	18.44–25.81 lbf⋅ft18.44–25.81 lbf⋅ft25–35 N⋅m

expand_moreFront axle suspension


Shock-absorber piston rod	44.25–54.58 lbf⋅ft44.25–54.58 lbf⋅ft60–74 N⋅m

expand_moreSuspension strut


On chassis	36.88–51.63 lbf⋅ft36.88–51.63 lbf⋅ft50–70 N⋅m
On stub axle	103.26–118.01 lbf⋅ft103.26–118.01 lbf⋅ft140–160 N⋅m

expand_moreWheel suspension

expand_moreFront axle drive shaft


Central nuts	147.51–206.52 lbf⋅ft147.51–206.52 lbf⋅ft200–280 N⋅m
Replace and caulk the nut.


Stabiliser mounting at suspension strut	73.76–88.51 lbf⋅ft73.76–88.51 lbf⋅ft100–120 N⋅m
Stabiliser mounting at the stabiliser	73.76–88.51 lbf⋅ft73.76–88.51 lbf⋅ft100–120 N⋅m
Stabilizer mounting at the subframe	33.19–40.57 lbf⋅ft33.19–40.57 lbf⋅ft45–55 N⋅m
Support joint at the stub axle	44.25–51.63 lbf⋅ft44.25–51.63 lbf⋅ft60–70 N⋅m
Screws and nuts must be replaced.
Support joint at the transverse control arm	44.25–51.63 lbf⋅ft44.25–51.63 lbf⋅ft60–70 N⋅m

expand_moreTransverse control arm

expand_moreAt the subframe


Front	88.51–103.26 lbf⋅ft88.51–103.26 lbf⋅ft120–140 N⋅m
Rear	118.01–132.76 lbf⋅ft118.01–132.76 lbf⋅ft160–180 N⋅m


Wheel hub wheel bearing	147.51–191.77 lbf⋅ft147.51–191.77 lbf⋅ft200–260 N⋅m

expand_moreWheels and tires


Tire pressure sensors	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Wheel attachment	66.38–81.13 lbf⋅ft66.38–81.13 lbf⋅ft90–110 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Kia Rio Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Kia warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Chassis and Body Fastener Tightening Specifications
Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Kia Rio Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2013 Kia Rio Sedan you're not only saving money, but also also improving your technical skills and learning something new.

2013 Kia Rio Sedan Third generation Front Suspension Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Kia Rio Sedan Third generation model years

Suggest edit