Additionally observe tire inflation pressure in the operating instructions or on the sticker for tire inflation pressure (on the vehicle)!
Rear tire pressure
2.17 atm.2.2 bar2.2 bar
Additionally observe tire inflation pressure in the operating instructions or on the sticker for tire inflation pressure (on the vehicle)!
expand_moreSpreading
With 14" chassis
13°42'+0°30'-0°30'
With 15" chassis
13°48'+0°30'-0°30'
With 16" chassis
13°48'+0°30'-0°30'
With 17" chassis
13°48'+0°30'-0°30'
Toe-in front (total toe)
0°12'+0°12'-0°12'
Toe-in rear
0°30'+0°24'-0°30'
expand_moreTread front
With 15" chassis
4.99 ft4.99 ft1520 mm
With 16" chassis
4.94 ft4.94 ft1507 mm
With 17" chassis
4.94 ft4.94 ft1507 mm
expand_moreTread rear
With 15" chassis
5 ft5 ft1525 mm
With 16" chassis
4.96 ft4.96 ft1511 mm
With 17" chassis
4.96 ft4.96 ft1511 mm
Wheel base
8.43 ft8.43 ft2570 mm
Chassis specifications will help to do body work on your 2013 Kia Rio Sedan.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Kia Rio Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Kia warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Kia Rio Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Kia Rio Sedan you're not only saving money, but also also improving your technical skills and learning something new.