2013 Jeep Cherokee Fifth generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Intake manifold | 18.44 lbf⋅ft |
| Auxiliary drive belt deflection pulley | 20.65 lbf⋅ft |
| Alternator | 51.63 lbf⋅ft |
| At the cylinder head | 22.13 lbf⋅ft |
| At the cylinder head | 18.44 lbf⋅ft |
| High-pressure pump drive wheel | 36.88 lbf⋅ft |
| On exhaust manifold | 17.7 lbf⋅ft |
| Replace nuts. | |
| At the cylinder head | 20.65 lbf⋅ft |
| First stage | 45.73 lbf⋅ft |
| Use bolts only four times. See figure 1. | |
| Second stage | 50.89 lbf⋅ft |
| Third stage | 90° |
| Fourth stage | 90° |
| Fifth stage | 90° |
| Valve cover | 18.44 lbf⋅ft |
| First stage | 18.44 lbf⋅ft |
| Use new screws. | |
| Second stage | 60° |
| Left-hand thread | 250.77 lbf⋅ft |
| First stage | 18.44 lbf⋅ft |
| Second stage | 100° |
| Vibration damper | 22.13 lbf⋅ft |
| First stage | 22.13 lbf⋅ft |
| Second stage | 40° |
| First stage | 22.13 lbf⋅ft |
| Second stage | 40° |
| First stage | 22.13 lbf⋅ft |
| Second stage | 40° |
| M10 | 39.83 lbf⋅ft |
| M8 | 18.44 lbf⋅ft |
| Toothed belt guard at the top | 4.43 lbf⋅ft |
| Toothed belt tightener | 18.44 lbf⋅ft |
| Oil filter cover | 18.44 lbf⋅ft |
| Oil sump | 18.44 lbf⋅ft |
| Camshaft sensor | 6.64 lbf⋅ft |
| Crankshaft sensor | 6.64 lbf⋅ft |
| Glow plugs | 8.11 lbf⋅ft |
| Left | 77.44 lbf⋅ft |
| Left | 115.8 lbf⋅ft |
| Right | 66.38 lbf⋅ft |
| Left | 77.44 lbf⋅ft |
| Right | 51.63 lbf⋅ft |
| Left | 47.94 lbf⋅ft |
| Right | 47.94 lbf⋅ft |
| Exhaust manifold | 15.49 lbf⋅ft |
| Starter | 17.7 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Jeep Cherokee user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Jeep warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Refrigerant Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Jeep Cherokee service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Jeep Cherokee you're not only saving money, but also also improving your technical skills and learning something new.
2013 Jeep Cherokee generations
In 2013 Jeep offered 2 generations of the Cherokee. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.