2016 Hyundai Tucson Third generation Rear Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Rear axle bleeder valve | 7.38 lbf⋅ft |
Guide screws | 16.23–22.13 lbf⋅ft |
Rear axle brake caliper mounting support | 59–73.76 lbf⋅ft |
Screws must be replaced. | |
Rear axle brake disc | 4.43 lbf⋅ft |
At the brake caliper | 18.44–22.13 lbf⋅ft |
Rear axle brake line | 11.06 lbf⋅ft |
Rear axle wheel speed sensor | 7.38 lbf⋅ft |
Rear axle track rod | 81.13–88.51 lbf⋅ft |
Nuts must be replaced. |
On chassis | 36.88–47.94 lbf⋅ft |
Nuts must be replaced. | |
On rear axle | 103.26–118.01 lbf⋅ft |
Screws and nuts must be replaced. |
Lower front transverse control arm | 103.26–118.01 lbf⋅ft |
Screws and nuts must be replaced. | |
Lower rear transverse control arm | 103.26–118.01 lbf⋅ft |
Screws and nuts must be replaced. | |
Rear axle carrier | 118.01–132.76 lbf⋅ft |
Screws must be replaced. | |
Rear axle drive shaft | 221.27–236.02 lbf⋅ft |
Screws must be replaced. |
On wheel hub | 73.76–88.51 lbf⋅ft |
Screws and nuts must be replaced. |
Front | 73.76–88.51 lbf⋅ft |
Rear axle stabilizer at the axle control arm | 73.76–88.51 lbf⋅ft |
Rear axle stabilizer mounting | 33.19–40.57 lbf⋅ft |
Upper front transverse control arm | 73.76–88.51 lbf⋅ft |
Use new screws and nuts. | |
Upper rear transverse control arm | 73.76–88.51 lbf⋅ft |
Screws and nuts must be replaced. |
Wheel attachment | 66.38–81.13 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 Hyundai Tucson user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Hyundai warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Hyundai Tucson service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2016 Hyundai Tucson you're not only saving money, but also also improving your technical skills and learning something new.
2016 Hyundai Tucson generations
In 2016 Hyundai offered 2 generations of the Tucson. Rear suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.