2024 Ford Tourneo Connect engine fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAir intake system

expand_moreIntake manifold

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
M8	13.28 lbf⋅ft13.28 lbf⋅ft18 N⋅m


All Ford gasoline straight-3 1.0 L M2GA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All other modifications	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreAuxiliary assemblies


Auxiliary drive belt deflection pulley	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAuxiliary drive belt tensioner


All Ford gasoline straight-4 1.6 L JQGA engines	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


Air-conditioning compressor	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Air-conditioning compressor bracket	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAir-conditioning compressor pressure line


All Ford gasoline straight-3 1.0 L M2GA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All other modifications	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreAlternator


All Ford gasoline straight-4 1.6 L JQGA engines	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m

expand_moreAll other modifications

expand_moreScrews


Front	31.72 lbf⋅ft31.72 lbf⋅ft43 N⋅m
Rear	36.14 lbf⋅ft36.14 lbf⋅ft49 N⋅m


Generator bracket	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreVacuum pump


All Ford gasoline straight-4 1.6 L JQGA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCarburetion

expand_moreFuel-distributing pipe


All Ford gasoline straight-4 1.6 L JQGA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreHigh-pressure line

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines


First stage	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m
Replace fuel line.
Second stage	Wait 5 minutes.
Third stage	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines


First stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Replace high-pressure line.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	20°20°20°

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace high-pressure line.
Second stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreHigh-pressure pump

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines

expand_moreOn bearing casing


First stage	Screw in screw(s) by hand.
Second stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten the new screws evenly in several steps.
Second stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreHigh-pressure pump drive wheel

expand_more1.6 EcoBoost with gasoline straight-4 1.6 L 148 HP engine (2013.11–)

Figure 1. Carburetion, High-pressure pump drive wheel, 1.6 EcoBoost with gasoline straight-4 1.6 L 148 HP engine (2013.11–).


Housing with 6 screws	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
See figure 1.

expand_moreHousing with 10 screws

expand_moreScrews 1 – 10

Figure 2. Carburetion, High-pressure pump drive wheel, 1.6 EcoBoost with gasoline straight-4 1.6 L 148 HP engine (2013.11–), Housing with 10 screws, Screws 1 – 10.


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
See figure 2.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Third stage	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m

expand_moreScrews 1, 2, 5, 6, 7, 8, 9, and 10


Fourth stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m


High-pressure pump pulley	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m

expand_moreInjection hoses


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace injection line.
Second stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreInjection nozzle (injector)


First stage	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
Replace screws.
Second stage	85°85°85°

expand_moreCharging

expand_moreTurbo charger

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines

expand_moreAt the turbocharger


Stud screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


Nuts	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines


First stage	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Second stage	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Third stage	wait for 30 s
Fourth stage	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m


All other modifications	19.18 lbf⋅ft19.18 lbf⋅ft26 N⋅m
Replace nuts.

expand_moreTurbocharger coolant feed line


1.6 EcoBoost with gasoline straight-4 1.6 L 148 HP engine (2013.11–)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_moreTurbocharger coolant return line


1.6 EcoBoost with gasoline straight-4 1.6 L 148 HP engine (2013.11–)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_moreTurbocharger oil feed line

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines


At the turbocharger	13.28 lbf⋅ft13.28 lbf⋅ft18 N⋅m
Replace screws.
On the engine block	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines


At the turbocharger	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
On the engine block	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


All other modifications	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.


Turbocharger oil return line	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCooling system

expand_moreCoolant pump


All Ford gasoline straight-4 1.6 L JQGA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines

Figure 3. Cooling system, Coolant pump, Ford gasoline straight-3 1.0 L M2GA.


Screws 1 – 5	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws. See figure 3.

expand_moreScrews 6 – 7


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCoolant pump pulley


All Ford gasoline straight-4 1.6 L JQGA engines	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreCylinder head

expand_moreCamshaft bearing

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines

expand_moreScrews 1 – 16


First stage	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
Replace screws.
Third stage	45°45°45°

expand_moreScrews 17 – 20


Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreScrews 17 – 18


Fourth stage	70°70°70°

expand_moreScrews 19 – 20


Fifth stage	53°53°53°

Figure 4. Cylinder head, Camshaft bearing.


All Ford gasoline straight-3 1.0 L M2GA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws. See figure 4.

All Ford gasoline straight-3 1.0 L M2GB engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws. See figure 4.

expand_moreAll other modifications


Bearing cap	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Figure 5. Cylinder head, Camshaft bearing, All other modifications.
Bearing casing	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
See figure 5.

expand_moreCylinder head screws

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines

Figure 6. Cylinder head, Cylinder head screws, Ford gasoline straight-4 1.6 L JQGA.


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws. See figure 6.
Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Third stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines

Figure 7. Cylinder head, Cylinder head screws, Ford gasoline straight-3 1.0 L M2GA.


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws. See figure 7.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	45° detach
Fourth stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Fifth stage	90°90°90°
Sixth stage	90°90°90°

expand_moreAll other modifications

Figure 8. Cylinder head, Cylinder head screws, All other modifications.


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws. See figure 8.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	260°260°260°

expand_moreValve cover

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines

expand_moreScrews 1 – 13

Figure 9. Cylinder head, Valve cover, Ford gasoline straight-4 1.6 L JQGA, Screws 1 – 13.


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
See figure 9.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Third stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


All Ford gasoline straight-3 1.0 L M2GA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Note correct order of tensioning. See figure 10.

All Ford gasoline straight-3 1.0 L M2GB engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Note correct order of tensioning. See figure 10.

expand_moreAll other modifications

expand_moreScrews 1 – 9

Figure 11. Cylinder head, Valve cover, All other modifications, Screws 1 – 9.


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
See figure 11.
Second stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m


Screws 10 – 11	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreEngine block

expand_moreConnecting rod bearing


All Ford gasoline straight-3 1.0 L M2GA engines	Component must not be knocked down.
All Ford gasoline straight-3 1.0 L M2GB engines	Component must not be knocked down.

expand_moreAll other modifications


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	180° detach
Third stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Fourth stage	130°130°130°

expand_moreCrankshaft central screws

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines


First stage	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Use new screw.
Second stage	90°90°90°
Third stage	Wait 10 seconds.
Fourth stage	15°15°15°

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Use new screw.
Second stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m

expand_moreWith special tool 303-1611


Third stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°
Sixth stage	90°90°90°
Seventh stage	90°90°90°
Eighth stage	90°90°90°

expand_moreAll other modifications


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Use new screw.
Second stage	190°190°190°

expand_moreDrive plate

expand_more1.6 EcoBoost with gasoline straight-4 1.6 L 148 HP engine (2013.11–)


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Third stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Fourth stage	90°90°90°


Engine block closure screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreFlywheel

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Third stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Fourth stage	90°90°90°

expand_moreAll other modifications


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Use new screws and tighten them crosswise.
Second stage	360° detach
Third stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Fourth stage	13.28 lbf⋅ft13.28 lbf⋅ft18 N⋅m
Fifth stage	75°75°75°

expand_moreMain bearing


All Ford gasoline straight-3 1.0 L M2GA engines	Component must not be knocked down.
All Ford gasoline straight-3 1.0 L M2GB engines	Component must not be knocked down.

expand_moreAll other modifications

expand_moreScrews 1 – 10

Figure 12. Engine block, Main bearing, All other modifications, Screws 1 – 10.


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws. See figure 12.
Fourth stage	180° detach.
Fifth stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Sixth stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Seventh stage	140°140°140°

expand_moreScrews 11 – 24


Second stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Use new screws.
Eighth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreScrews 25


Third stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Replace screws.
Ninth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreEngine control

expand_moreCamshaft adjuster


Camshaft adjuster valve	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m


Camshaft drive belt deflection pulley	27.29 lbf⋅ft27.29 lbf⋅ft37 N⋅m

expand_moreCamshaft timing gear


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	50°50°50°

expand_moreInlet camshaft wheel

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines

expand_moreCentral screws


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Use new screw.
Second stage	75°75°75°


Locking screws	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screw.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Fourth stage	45°45°45°

expand_moreOutlet camshaft wheel

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines

expand_moreCentral screws


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Use new screw.
Second stage	75°75°75°


Locking screws	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screw.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Fourth stage	45°45°45°

expand_moreToothed belt guard


All Ford gasoline straight-4 1.6 L JQGA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines

expand_moreScrews 1 – 2

Figure 13. Engine control, Toothed belt guard, Ford gasoline straight-3 1.0 L M2GA, Screws 1 – 2.


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws. See figure 13.
Seventh stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Eighth stage	90°90°90°

expand_moreScrews 3 – 6


Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Fourth stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Fifth stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Sixth stage	90°90°90°

expand_moreScrews 7 – 20


Third stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Ninth stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Tenth stage	90°90°90°


Toothed belt guard at the bottom	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Toothed belt guard at the top	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m

expand_moreToothed belt tensioning roller


All Ford gasoline straight-4 1.6 L JQGA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	19.18 lbf⋅ft19.18 lbf⋅ft26 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	19.18 lbf⋅ft19.18 lbf⋅ft26 N⋅m
All other modifications	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreEngine lubrication


Oil cooler	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreOil drain plug


All Ford gasoline straight-4 1.6 L JQGA engines	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOil filter housing


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.
On the engine block	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreOil pump


All Ford gasoline straight-4 1.6 L JQGA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll other modifications


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreOil sump


All Ford gasoline straight-4 1.6 L JQGA engines	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines


M10	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
Figure 14. Engine lubrication, Oil sump, Ford gasoline straight-3 1.0 L M2GA.
M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
See figure 14.


All other modifications	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreEngine management

expand_moreCamshaft sensor


All Ford gasoline straight-4 1.6 L JQGA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All other modifications	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreCrankshaft sensor


All Ford gasoline straight-3 1.0 L M2GA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All other modifications	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m


Exhaust gas temperature sensor	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Glow plugs	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m

expand_moreKnock sensor


All Ford gasoline straight-4 1.6 L JQGA engines	13.28 lbf⋅ft13.28 lbf⋅ft18 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreLambda sensor


All Ford gasoline straight-4 1.6 L JQGA engines	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
All other modifications	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreEngine mounting

expand_moreConnecting strut between the subframe and the front structure


All Ford gasoline straight-4 1.6 L JQGA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All other modifications	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m

expand_moreEngine bracket

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines


On the engine block	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Stud screws	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines

expand_moreOn timing case cover


Stud screws	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


All other modifications	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreEngine mounting

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines


On chassis	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
On timing case cover	59 lbf⋅ft59 lbf⋅ft80 N⋅m

expand_moreAll other modifications


On chassis	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
On engine bracket	59 lbf⋅ft59 lbf⋅ft80 N⋅m


Extension cross support on subframe	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreSubframe

expand_moreOn chassis


Front	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
Replace screws.

expand_moreRear


First stage	103.26 lbf⋅ft103.26 lbf⋅ft140 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreSubframe stiffening plate


At the crossmember	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
On chassis	46.47 lbf⋅ft46.47 lbf⋅ft63 N⋅m

expand_moreTorque arm


All Ford gasoline straight-4 1.6 L JQGA engines	92.2 lbf⋅ft92.2 lbf⋅ft125 N⋅m

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines

expand_moreAt the subframe


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	270°270°270°


At the gearbox	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m

expand_moreTorque support bracket


1.6 EcoBoost with gasoline straight-4 1.6 L 148 HP engine (2013.11–)	59 lbf⋅ft59 lbf⋅ft80 N⋅m

expand_moreExhaust system

expand_moreCatalytic converter

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines


At the turbocharger	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m


All Ford gasoline straight-3 1.0 L M2GA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace screws and nuts.
All Ford gasoline straight-3 1.0 L M2GB engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace screws and nuts.

expand_moreCatalytic converter bracket


1.6 EcoBoost with gasoline straight-4 1.6 L 148 HP engine (2013.11–)	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreExhaust manifold

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines

expand_moreAt the cylinder head


Stud screws	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


Nuts	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m

expand_moreOn exhaust manifold


Stud screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Ford gasoline straight-3 1.0 L M2GA engines

expand_moreAt the cylinder head


Stud screws	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll other modifications

expand_moreAt the cylinder head


Stud screws	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


Nuts	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreExhaust manifold heat shields


All Ford gasoline straight-4 1.6 L JQGA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
All other modifications	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m


Exhaust pipe	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m

expand_moreExhaust pipe bracket

expand_moreAll Ford gasoline straight-4 1.6 L JQGA engines


At the subframe	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m


All Ford gasoline straight-3 1.0 L M2GA engines	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m

expand_moreIgnition system

expand_moreSpark plugs


All Ford gasoline straight-4 1.6 L JQGA engines	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreStart system

expand_moreStarter


All Ford gasoline straight-4 1.6 L JQGA engines	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
All Ford gasoline straight-3 1.0 L M2GA engines	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
All Ford gasoline straight-3 1.0 L M2GB engines	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2024 Ford Tourneo Connect user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Tourneo Connect service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2024 Ford Tourneo Connect you're not only saving money, but also also improving your technical skills and learning something new.

2024 Ford Tourneo Connect Second generation facelift (MK2) Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Ford Tourneo Connect Second generation facelift (MK2) model years

Suggest edit