2002 Ford Mondeo Sedan Second generation (MK3) Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
All Ford gasoline straight-4 1.8 L CGBA engines | 13.28 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBB engines | 13.28 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBA engines | 13.28 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBB engines | 13.28 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBA engines | 13.28 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBB engines | 13.28 lbf⋅ft |
Lower section of intake manifold | 7.38 lbf⋅ft |
Tighten in steps from inside to outside. | |
Upper section of intake manifold | 7.38 lbf⋅ft |
Tighten cross-wise. |
Lower section of intake manifold | 7.38 lbf⋅ft |
Upper section of intake manifold | 7.38 lbf⋅ft |
All other modifications | 11.8 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBA engines | 18.44 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBB engines | 18.44 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBA engines | 18.44 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBB engines | 18.44 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBA engines | 18.44 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBB engines | 18.44 lbf⋅ft |
All other modifications | 31.72 lbf⋅ft |
Air-conditioning compressor | 18.44 lbf⋅ft |
Nuts | 34.67 lbf⋅ft |
Screws | 34.67 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 18.44 lbf⋅ft |
All other modifications | 34.67 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 34.67 lbf⋅ft |
On the engine block | 34.67 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 18.44 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 18.44 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBA engines | 13.28 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBB engines | 13.28 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBA engines | 13.28 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBB engines | 13.28 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBA engines | 13.28 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBB engines | 13.28 lbf⋅ft |
Nuts | 7.38 lbf⋅ft |
Screws | 18.44 lbf⋅ft |
Nuts | 7.38 lbf⋅ft |
Screws | 18.44 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
Vacuum pump | 16.23 lbf⋅ft |
At the bracket | 7.38 lbf⋅ft |
On exhaust manifold | 27.29 lbf⋅ft |
Replace sealing rings. |
2.5 V6 24V with gasoline V6 2.5 L 168 HP at 6000 RPM, 220 N⋅m at 4250 RPM engine (2000.10–2007.3) | 7.38 lbf⋅ft |
ST220 with gasoline V6 3.0 L 223 HP at 6150 RPM, 285 N⋅m at 4900 RPM engine (2002.4–2007.3) | 7.38 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
Wheel | 23.6 lbf⋅ft |
All Ford diesel straight-4 2.0 L FMBA engines | 29.5 lbf⋅ft |
All Ford diesel straight-4 2.0 L N7BA engines | 29.5 lbf⋅ft |
With common rail injection system | 29.5 lbf⋅ft |
With distributor injection pump | 25.81 lbf⋅ft |
2.0 TDCi (2000.10–2007.3) | 34.67 lbf⋅ft |
2.0 TDCi with diesel straight-4 2.0 L 129 HP at 330 RPM, 330 N⋅m at 1800 RPM engine (2001.10–2007.3) | 34.67 lbf⋅ft |
2.0 TDCi with diesel straight-4 2.0 L 129 HP at 330 RPM, 330 N⋅m at 1800 RPM engine (2001.10–2007.3) | 34.67 lbf⋅ft |
With common rail injection system | 34.67 lbf⋅ft |
With distributor injection pump | 38.35 lbf⋅ft |
High-pressure pump | 24.34 lbf⋅ft |
Otherwise | 16.23 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
Injection pump pulley | 23.6 lbf⋅ft |
Turbocharger oil feed line | 10.33 lbf⋅ft |
Replace sealing rings. | |
Turbocharger oil return line | 7.38 lbf⋅ft |
Replace sealing rings. |
All Ford gasoline straight-4 1.8 L CGBA engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBB engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBA engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBB engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBA engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBB engines | 7.38 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Second stage | 90° |
All other modifications | 17.7 lbf⋅ft |
Coolant pump pulley | 18.44 lbf⋅ft |
Radiator mounting | 18.44 lbf⋅ft |
First stage | 5.16 lbf⋅ft |
Second stage | 11.8 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 7.38 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 7.38 lbf⋅ft |
M6 screws | 7.38 lbf⋅ft |
M8 screws | 16.96 lbf⋅ft |
Tighten the screws evenly from inside to outside in several steps. |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 11.06 lbf⋅ft |
Third stage | 33.19 lbf⋅ft |
Fourth stage | 90° |
Fifth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 1. | |
Second stage | 90° |
Third stage | 360° detach |
Loosen the cylinder head screws in the reverse order of tightening. | |
Fourth stage | 29.5 lbf⋅ft |
Fifth stage | 90° |
Sixth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 1. | |
Second stage | 90° |
Third stage | 360° detach |
Loosen the cylinder head screws in the reverse order of tightening. | |
Fourth stage | 29.5 lbf⋅ft |
Fifth stage | 90° |
Sixth stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. See figure 2. | |
Third stage | 14.75 lbf⋅ft |
Fifth stage | 25.81 lbf⋅ft |
Seventh stage | 33.19 lbf⋅ft |
Eighth stage | 90° |
Tenth stage | 90° |
Second stage | 7.38 lbf⋅ft |
Fourth stage | 14.75 lbf⋅ft |
Sixth stage | 19.18 lbf⋅ft |
Ninth stage | 90° |
Eleventh stage | 90° |
First stage | 9.59 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Valve cover | 7.38 lbf⋅ft |
First stage | 18.44 lbf⋅ft |
Mark screws with punch blow. | |
Second stage | 27.29 lbf⋅ft |
Reuse screws only 4 times. | |
Third stage | 90° |
First stage | 88.51 lbf⋅ft |
Replace screws. | |
Second stage | 360° detach |
Third stage | 36.88 lbf⋅ft |
Fourth stage | 90° |
First stage | 88.51 lbf⋅ft |
Replace screws. | |
Second stage | 360° detach |
Third stage | 36.88 lbf⋅ft |
Fourth stage | 90° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Reuse screws only 3 times. | |
Second stage | 120° |
All Ford gasoline V6 2.5 L LCBD engines | 59 lbf⋅ft |
First stage | 18.44 lbf⋅ft |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Tighten cross-wise. | |
Third stage | 48° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 59 lbf⋅ft |
Third stage | 82.61 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 22.13 lbf⋅ft |
Tighten cross-wise. | |
Third stage | 55.32 lbf⋅ft |
Fourth stage | 45° |
2.5 V6 24V with gasoline V6 2.5 L 168 HP at 6000 RPM, 220 N⋅m at 4250 RPM engine (2000.10–2007.3) | 59 lbf⋅ft |
ST220 with gasoline V6 3.0 L 223 HP at 6150 RPM, 285 N⋅m at 4900 RPM engine (2002.4–2007.3) | 59 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 22.13 lbf⋅ft |
Third stage | 55.32 lbf⋅ft |
Fourth stage | 45° |
First stage | 8.85 lbf⋅in |
Mark screws with punch blow. | |
Second stage | 14.75 lbf⋅ft |
Reuse screws only 4 times. | |
Third stage | 25.81 lbf⋅ft |
Fourth stage | 59 lbf⋅ft |
Fifth stage | 90° |
All Ford gasoline V6 2.5 L LCBD engines | 7.38 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 18.44 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 18.44 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 18.44 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Camshaft timing chain tensioning rail | 11.06 lbf⋅ft |
Camshaft timing gear | 24.34 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBA engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBB engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBA engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBB engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBA engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBB engines | 7.38 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 18.44 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 18.44 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBA engines | 53.1 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBB engines | 53.1 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBA engines | 53.1 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBB engines | 53.1 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBA engines | 53.1 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBB engines | 53.1 lbf⋅ft |
All other modifications | 24.34 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBA engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBB engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBA engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBB engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBA engines | 7.38 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBB engines | 7.38 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBA engines | 53.1 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBB engines | 53.1 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBA engines | 53.1 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBB engines | 53.1 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBA engines | 53.1 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBB engines | 53.1 lbf⋅ft |
All other modifications | 24.34 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 18.44 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 18.44 lbf⋅ft |
M10 | 35.4 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
All Ford diesel straight-4 2.0 L FMBA engines | 17.7 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 40.57 lbf⋅ft |
All Ford diesel straight-4 2.0 L N7BA engines | 17.7 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBA engines | 20.65 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBB engines | 20.65 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBA engines | 20.65 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBB engines | 20.65 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBA engines | 20.65 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBB engines | 20.65 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 19.18 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 19.18 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
On the engine block | 18.44 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 16.96 lbf⋅ft |
Oil pump chain wheel | 18.44 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBA engines | 18.44 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CGBB engines | 18.44 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBA engines | 18.44 lbf⋅ft |
All Ford gasoline straight-4 1.8 L CHBB engines | 18.44 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBA engines | 18.44 lbf⋅ft |
All Ford gasoline straight-4 2.0 L CJBB engines | 18.44 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 18.44 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 18.44 lbf⋅ft |
First stage | 5.16 lbf⋅ft |
Second stage | 10.33 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 7.38 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 7.38 lbf⋅ft |
All other modifications | 5.16 lbf⋅ft |
Exhaust gas temperature sensor | 25.81 lbf⋅ft |
Glow plugs | 9.59 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 18.44 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 18.44 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Lambda sensor | 35.4 lbf⋅ft |
On the engine block | 34.67 lbf⋅ft |
On the engine block | 34.67 lbf⋅ft |
All other modifications | 59 lbf⋅ft |
On engine bracket | 61.22 lbf⋅ft |
On engine bracket | 61.22 lbf⋅ft |
Replace nuts. |
On chassis | 59 lbf⋅ft |
On engine bracket | 59 lbf⋅ft |
Subframe | 104.73 lbf⋅ft |
Subframe stiffening plate | 7.38 lbf⋅ft |
Torque arm | 59 lbf⋅ft |
Catalytic converter | 33.93 lbf⋅ft |
Diesel particulate filter | 34.67 lbf⋅ft |
Heat shields | 7.38 lbf⋅ft |
Otherwise | 40.57 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 14.75 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 14.75 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
Replace screws and nuts. |
Exhaust manifold heat shields | 7.38 lbf⋅ft |
All Ford gasoline V6 2.5 L LCBD engines | 11.06 lbf⋅ft |
All Ford gasoline V6 3.0 L MEBA engines | 11.06 lbf⋅ft |
All other modifications | 8.85 lbf⋅ft |
Starter | 25.81 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2002 Ford Mondeo Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Mondeo Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2002 Ford Mondeo Sedan you're not only saving money, but also also improving your technical skills and learning something new.