2012 Ford Focus Wagon Third generation (MK3) Engine Oil Capacity
For 2012 Focus Wagon Third generation (MK3) Ford recommends to use: WSS-M2C948-B, and WSS-M2C913-C engine oils. To select the right engine oil see the table below.
How much engine oil you need to put into 2012 Focus Wagon depends on conditions listed below.
in your garage to make future searches easy.
Condition | Volume |
---|
1.0 EcoBoost with gasoline straight-3 1.0 L 123 HP engine (2012.2–) | 4.86 US qt. |
Engine oil: WSS-M2C948-B | |
1.0 EcoBoost with gasoline straight-3 1.0 L 99 HP engine (2012.2–) | 4.86 US qt. |
Engine oil: WSS-M2C948-B |
Amount to change | 4.28 US qt. |
Engine oil: WSS-M2C913-C | |
New filling | 4.86 US qt. |
Engine oil: WSS-M2C913-C |
Amount to change | 4.28 US qt. |
Engine oil: WSS-M2C913-C | |
New filling | 4.86 US qt. |
Engine oil: WSS-M2C913-C |
1.6 TDCi ECOnetic with diesel straight-4 1.6 L 103 HP engine (2012.5–) | 4.07 US qt. |
Engine oil: WSS-M2C913-C | |
1.6 TDCi ECOnetic with diesel straight-4 1.6 L 103 HP engine (2012.5–) | 4.07 US qt. |
Engine oil: WSS-M2C913-C | |
1.6 TDCi with diesel straight-4 1.6 L 114 HP engine (2010.7–) | 4.07 US qt. |
Engine oil: WSS-M2C913-C | |
1.6 TDCi with diesel straight-4 1.6 L 114 HP engine (2010.7–) | 4.07 US qt. |
Engine oil: WSS-M2C913-C | |
1.6 TDCi with diesel straight-4 1.6 L 94 HP engine (2010.7–) | 4.07 US qt. |
Engine oil: WSS-M2C913-C | |
1.6 TDCi with diesel straight-4 1.6 L 94 HP engine (2010.7–) | 4.07 US qt. |
Engine oil: WSS-M2C913-C |
Amount to change | 4.28 US qt. |
Engine oil: WSS-M2C913-C | |
New filling | 4.86 US qt. |
Engine oil: WSS-M2C913-C |
2.0 TDCi with diesel straight-4 2.0 L 114 HP engine (2010.7–) | 5.97 US qt. |
Engine oil: WSS-M2C913-C | |
2.0 TDCi with diesel straight-4 2.0 L 134 HP engine (2010.7–) | 5.97 US qt. |
Engine oil: WSS-M2C913-C | |
2.0 TDCi with diesel straight-4 2.0 L 138 HP engine (2010.7–) | 5.97 US qt. |
Engine oil: WSS-M2C913-C | |
2.0 TDCi with diesel straight-4 2.0 L 161 HP engine (2010.7–) | 5.97 US qt. |
Engine oil: WSS-M2C913-C | |
2.0 Ti-GDi with gasoline straight-4 2.0 L 168 HP engine (2010.7–) | 4.54 US qt. |
Engine oil: WSS-M2C913-C | |
All other modifications | 4.28 US qt. |
Engine oil: WSS-M2C913-C |
Replacing engine oil in your 2012 Ford Focus Wagon is quite an easy task. It's a bit dirty, but everyone can handle it. It will take about 30–60 minutes depends on your skill level and might save you $10–$30 depends on the region you live in.
First unscrew the refill cap on the top of the engine. Use a ratchet with the correct size head to unscrew the drain plug on the engine oil pan located on the bottom side of the engine, and drain old oil. You might need to unscrew a few more screws to remove protection covers underneath your car to get access to the oil pan and the oil filter. Then using an oil filter wrench unscrew the old oil filter. Then lubricate a new filter rubber gasket with clean engine oil and install the new filter. Install a new drain plug, and with help of a funnel refill the engine with new engine oil.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2012 Ford Focus Wagon user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Focus Wagon service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2012 Ford Focus Wagon you're not only saving money, but also also improving your technical skills and learning something new.
2012 Ford Focus Wagon generations
In 2012 Ford offered 2 generations of the Focus Wagon. Engine oil capacity may vary in different generations. Be sure that you are looking at the rigt modification.