2018 Ford Focus Sedan Third generation facelift (MK3.5) Rear Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Wheel bearing unit | 81.13 lbf⋅ft |
Rear axle bleeder valve | 6.64 lbf⋅ft |
Rear axle brake caliper | 25.81 lbf⋅ft |
Rear axle brake caliper mounting support | 51.63 lbf⋅ft |
At the brake caliper | 20.65 lbf⋅ft |
At the wheel brake cylinder | 16.96 lbf⋅ft |
At the brake caliper | 20.65 lbf⋅ft |
At the wheel brake cylinder | 16.96 lbf⋅ft |
At the brake caliper | 20.65 lbf⋅ft |
At the wheel brake cylinder | 16.96 lbf⋅ft |
At the brake caliper | 20.65 lbf⋅ft |
At the wheel brake cylinder | 16.96 lbf⋅ft |
At the brake caliper | 20.65 lbf⋅ft |
At the wheel brake cylinder | 16.96 lbf⋅ft |
At the brake caliper | 20.65 lbf⋅ft |
Rear axle brake line | 11.06 lbf⋅ft |
All Ford gasoline straight-3 1.0 L M1DA engines | 8.85 lbf⋅ft |
All Ford gasoline straight-3 1.0 L M2DA engines | 8.85 lbf⋅ft |
All Ford gasoline straight-4 2.0 L MGDA engines | 8.85 lbf⋅ft |
All Ford gasoline/alcohol/natural gas straight-4 1.6 L MUDA engines | 8.85 lbf⋅ft |
All Ford diesel straight-4 2.0 L T7DB engines | 8.85 lbf⋅ft |
All Ford gasoline straight-4 2.0 L XQDA engines | 8.85 lbf⋅ft |
All Ford diesel straight-4 1.5 L XWDA engines | 8.85 lbf⋅ft |
All Ford diesel straight-4 1.5 L XWDB engines | 8.85 lbf⋅ft |
All Ford diesel straight-4 1.5 L XWDC engines | 8.85 lbf⋅ft |
All Ford diesel straight-4 1.5 L XWDD engines | 8.85 lbf⋅ft |
All Ford diesel straight-4 1.5 L XXDA engines | 8.85 lbf⋅ft |
All Ford diesel straight-4 1.5 L XXDB engines | 8.85 lbf⋅ft |
All Ford diesel straight-4 1.5 L XXDC engines | 8.85 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
Rear axle wheel speed sensor | 3.69 lbf⋅ft |
On chassis | 84.82 lbf⋅ft |
On stub axle | 84.82 lbf⋅ft |
At the axle support | 84.82 lbf⋅ft |
On stub axle | 84.82 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Eccentric screw | |
Second stage | 66.38 lbf⋅ft |
On stub axle | 84.82 lbf⋅ft |
On chassis | 84.82 lbf⋅ft |
On chassis | 129.07 lbf⋅ft |
Rear axle stabilizer mounting | 44.25 lbf⋅ft |
Replace screws. |
With rigid stabilizer support | 22.13 lbf⋅ft |
With stabilizer support ball joint variant | 35.4 lbf⋅ft |
With rigid stabilizer support | 22.13 lbf⋅ft |
With stabilizer support ball joint variant | 88.51 lbf⋅ft |
At the axle support | 84.82 lbf⋅ft |
On stub axle | 84.82 lbf⋅ft |
First stage | Tighten by hand |
tighten alternately | |
Second stage | 81.13 lbf⋅ft |
Torx screws | 1.11 lbf⋅ft |
Replace bolts. | |
Union nuts | 5.9 lbf⋅ft |
Replace nut. |
First stage | Hand-tighten nuts. |
Second stage | 99.57 lbf⋅ft |
Tighten the wheel nuts alternately |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2018 Ford Focus Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Focus Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2018 Ford Focus Sedan you're not only saving money, but also also improving your technical skills and learning something new.