2018 Ford Focus Sedan Third generation facelift (MK3.5) Brake System Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Variant 1 | 10.94 in |
Variant 2 | 11.81 in |
Variant 1 | 10.94 in |
Variant 2 | 11.81 in |
Variant 1 | 10.94 in |
Variant 2 | 11.81 in |
For 278 × 25 mm brake discs | 10.94 in |
For 300 × 25 mm brake discs | 11.81 in |
For 320 × 25 mm brake discs | 1.05 ft |
Front axle brake disc thickness | 0.98 in |
Front axle brake disc minimal thickness | 0.91 in |
Without backing plate | 0.059 in |
1.6 EcoBoost with gasoline straight-4 1.6 L 148 HP engine (2010.7–) | 0.00039 in |
1.6 EcoBoost with gasoline straight-4 1.6 L 148 HP engine (2010.7–) | 0.00039 in |
1.6 EcoBoost with gasoline straight-4 1.6 L 148 HP engine (2010.7–) | 0.00039 in |
1.6 EcoBoost with gasoline straight-4 1.6 L 180 HP engine (2010.7–) | 0.00039 in |
1.6 EcoBoost with gasoline straight-4 1.6 L 180 HP engine (2010.7–) | 0.00039 in |
1.6 TDCi with diesel straight-4 1.6 L 114 HP engine (2010.7–) | 0.00059 in |
1.6 TDCi with diesel straight-4 1.6 L 114 HP engine (2010.7–) | 0.00059 in |
1.6 TDCi with diesel straight-4 1.6 L 94 HP engine (2010.7–) | 0.00059 in |
1.6 TDCi with diesel straight-4 1.6 L 94 HP engine (2010.7–) | 0.00059 in |
1.6 Ti with gasoline straight-4 1.6 L 103 HP engine (2010.7–) | 0.00039 in |
1.6 Ti with gasoline straight-4 1.6 L 123 HP engine (2010.7–) | 0.00039 in |
2.0 TDCi with diesel straight-4 2.0 L 114 HP engine (2010.7–) | 0.00039 in |
2.0 TDCi with diesel straight-4 2.0 L 134 HP engine (2010.7–) | 0.00039 in |
2.0 TDCi with diesel straight-4 2.0 L 138 HP engine (2010.7–) | 0.00039 in |
2.0 TDCi with diesel straight-4 2.0 L 161 HP engine (2010.7–) | 0.00039 in |
All other modifications | 0.0028 in |
Maximum lateral run-out of rear axle brake disc | 0.0039 in |
Without backing plate | 0.039 in |
With disc brake | 11.02 in |
All other modifications | 10.67 in |
Rear axle brake disc thickness | 0.43 in |
Rear axle minimal brake disc thickness | 0.35 in |
Rear axle brake drum diameter wear limit | 9.06 in |
Without backing plate | 0.059 in |
Without backing plate | 0.039 in |
Without backing plate | 0.059 in |
Brake system is the most important system in your 2018 Focus Sedan. Check pads and disks from time to time and replace them as they worn below minimum thickness allowed by Ford.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2018 Ford Focus Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Focus Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2018 Ford Focus Sedan you're not only saving money, but also also improving your technical skills and learning something new.