2014 Ford Fiesta Hatchback Sixth generation facelift (MK6) Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Bleed valve | 5.9 lbf⋅ft |
| First stage | 7.38 lbf⋅ft |
| Replace sealing rings. | |
| Second stage | 90° |
| Brake line | 13.28 lbf⋅ft |
| On caliper support | 19.18 lbf⋅ft |
| On stub axle | 51.63 lbf⋅ft |
| Wheel speed sensor | 6.64 lbf⋅ft |
| Lower steering column joint | 25.08 lbf⋅ft |
| Use new screw. | |
| Steering gear | 66.38 lbf⋅ft |
| Track rod end on stub axle | 39.09 lbf⋅ft |
| Track rod end on track rod | 58.27 lbf⋅ft |
| Track rod on steering gear | 60.48 lbf⋅ft |
| Shock-absorber piston rod | 35.4 lbf⋅ft |
| On chassis | 22.13 lbf⋅ft |
| First stage | 60.48 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| Central nuts | 188.08 lbf⋅ft |
| Replace nuts. | |
| Stabiliser mounting at the stabiliser | 35.4 lbf⋅ft |
| Stabiliser mounting at suspension strut | 35.4 lbf⋅ft |
| Stabilizer mounting at the subframe | 35.4 lbf⋅ft |
| Support joint at the stub axle | 38.35 lbf⋅ft |
| Replace screws. | |
| First stage | 75.97 lbf⋅ft |
| Replace screws. | |
| Second stage | 180° |
| First stage | 47.94 lbf⋅ft |
| Use new screws | |
| Second stage | 180° |
| Torx screws | 1.11 lbf⋅ft |
| Replace screws. | |
| Union nuts | 5.9 lbf⋅ft |
| Replace nuts. | |
| First stage | Tighten bolt(s) until hand-tight. |
| Second stage | 81.13 lbf⋅ft |
| First stage | Tighten bolt(s) until hand-tight. |
| Second stage | 81.13 lbf⋅ft |
| First stage | Tighten bolt(s) until hand-tight. |
| Second stage | 99.57 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 Ford Fiesta Hatchback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Fiesta Hatchback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2014 Ford Fiesta Hatchback you're not only saving money, but also also improving your technical skills and learning something new.
2014 Ford Fiesta Hatchback generations
In 2014 Ford offered 4 generations of the Fiesta Hatchback. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.