Important! Tighten the screws and nuts of the chassis when the vehicle has been lowered.
On stub axle
70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
expand_moreRear axle suspension
expand_moreRear axle shock absorber
At the transverse control arm
53.1 lbf⋅ft53.1 lbf⋅ft72 N⋅m
Replace screws and nuts.
On chassis
38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
expand_moreRear axle wheel suspension
expand_moreLower front transverse control arm
On rear axle
62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m
On stub axle
59.74 lbf⋅ft59.74 lbf⋅ft81 N⋅m
Rear axle drive shaft
157.1 lbf⋅ft157.1 lbf⋅ft213 N⋅m
Replace nuts.
expand_moreRear axle longitudinal control arm
At the crossmember
62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m
Important! Tighten the screws and nuts of the chassis when the vehicle has been lowered.
On stub axle
59.74 lbf⋅ft59.74 lbf⋅ft81 N⋅m
Rear axle stabilizer mounting
44.99 lbf⋅ft44.99 lbf⋅ft61 N⋅m
Rear axle stabilizer support at the stabilizer
44.99 lbf⋅ft44.99 lbf⋅ft61 N⋅m
Important! Tighten the screws and nuts of the chassis when the vehicle has been lowered.
Rear axle stabilizer support at the stub axle
44.99 lbf⋅ft44.99 lbf⋅ft61 N⋅m
Important! Tighten the screws and nuts of the chassis when the vehicle has been lowered.
expand_moreTrack control arm lower
On rear axle
79.66 lbf⋅ft79.66 lbf⋅ft108 N⋅m
On stub axle
101.78 lbf⋅ft101.78 lbf⋅ft138 N⋅m
expand_moreTrack control arm upper
On rear axle
62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m
On stub axle
72.28 lbf⋅ft72.28 lbf⋅ft98 N⋅m
expand_moreUpper front transverse control arm
At the crossmember
62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m
On stub axle
72.28 lbf⋅ft72.28 lbf⋅ft98 N⋅m
Important! Tighten the screws and nuts of the chassis when the vehicle has been lowered.
expand_moreUpper rear transverse control arm
At the crossmember
62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m
Important! Do not tighten the transverse control arm screws until the vehicle is on the ground.
On stub axle
72.28 lbf⋅ft72.28 lbf⋅ft98 N⋅m
expand_moreWheel hub wheel bearing
On stub axle
50.15 lbf⋅ft50.15 lbf⋅ft68 N⋅m
Replace screws.
expand_moreWheels and tires
expand_moreTire pressure sensors
Union nuts
5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
expand_moreWheel attachment
Aluminium rims
110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Steel rims
140.14 lbf⋅ft140.14 lbf⋅ft190 N⋅m
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 Chrysler 300C user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Chrysler warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Chrysler 300C service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2014 Chrysler 300C you're not only saving money, but also also improving your technical skills and learning something new.