2009 BMW Z4 Second generation Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Code range 11 mm | 8.85–13.28 lbf⋅ft |
| Code range 9 mm | 5.16–8.11 lbf⋅ft |
| At the brake caliper | 17.7 lbf⋅ft |
| Code range 13 mm | 25.81 lbf⋅ft |
| Replace self-locking or microencapsulated screws. | |
| Code range 7 mm | 22.13 lbf⋅ft |
| M12 × 1,5 screws | 81.13 lbf⋅ft |
| Front axle brake disc | 11.8 lbf⋅ft |
| Replace screws. | |
| Wheel speed sensor | 5.9 lbf⋅ft |
| First stage | 41.3 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 90° |
| M14 | 121.7 lbf⋅ft |
| Replace nuts. | |
| M10 | 29.5 lbf⋅ft |
| Replace screws. | |
| M8 | 25.08 lbf⋅ft |
| Replace nuts. | |
| M12 | 47.2 lbf⋅ft |
| Replace nuts. | |
| M12 | 59.74 lbf⋅ft |
| Replace nuts. | |
| M8 | 16.23 lbf⋅ft |
| Replace nuts. | |
| M10 | 42.78 lbf⋅ft |
| Replace nuts. | |
| M10 | 42.78 lbf⋅ft |
| Replace nuts. | |
| First stage | 50.15 lbf⋅ft |
| Replace nuts. | |
| Second stage | 90° |
| M14 | 121.7 lbf⋅ft |
| Replace nuts. | |
| M8 | 16.23 lbf⋅ft |
| Replace nuts. | |
| M12 | 81.13 lbf⋅ft |
| Replace screws. | |
| Union nuts | 2.58 lbf⋅ft |
| Wheel attachment | 88.51 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2009 BMW Z4 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW Z4 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2009 BMW Z4 you're not only saving money, but also also improving your technical skills and learning something new.
2009 BMW Z4 generations
In 2009 BMW offered 2 generations of the Z4. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.